• 제목/요약/키워드: Circular Polarization Antenna

검색결과 197건 처리시간 0.03초

Polarization-Diversity Cross-Shaped Patch Antenna for Satellite-DMB Systems

  • Lim, Jong-Hyuk;Back, Gyu-Tae;Yun, Tae-Yeoul
    • ETRI Journal
    • /
    • 제32권2호
    • /
    • pp.312-318
    • /
    • 2010
  • A small reconfigurable patch antenna is proposed to achieve polarization diversity for digital multimedia broadcasting systems at 2.6 GHz. To obtain polarization diversity, a pair of on-slit PIN diodes is inserted in each diagonal of a cross-shaped patch. Thus, four PIN-diodes on these slits are utilized to change the connection of the slits and thus achieve polarization. Bias circuits for the diodes are allocated in the cutting corner of the cross-shaped patch to minimize the antenna size. The antenna produces left-hand circular polarization, right-hand circular polarization, or linear polarization, depending on the PIN-diode status. Analysis of circular polarization operation is explicated. Measurements show a gain of about 1.5 dB, a cross polarization of about -20 dB, and an axial ratio of about 2.5 dB.

A Corner-Fed Microstrip Circular Antenna with Switchable Polarization

  • Sung, Young-Je
    • ETRI Journal
    • /
    • 제30권5호
    • /
    • pp.718-722
    • /
    • 2008
  • In this paper, a design for a novel microstrip antenna with circular polarization diversity is proposed and experimentally investigated. This antenna is excited by a microstrip line, which is located at the corner of a circular patch. The polarization state can be switched electrically by setting a diode to on or off. The novel structure we describe here enables the optimization of the input match for both polarizations. From the measured result, good axial ratios are observed at the operating frequencies.

  • PDF

Circularly Polarized Electromagnetic Band Gap Patch-Slot Antenna with Circular Offset Slot

  • Hajlaoui, El Amjed
    • Journal of information and communication convergence engineering
    • /
    • 제16권3호
    • /
    • pp.197-202
    • /
    • 2018
  • This paper reveals the impact of the insertion of electromagnetic band gap (EBG) structures on the performance of circularly polarized (CP) patch-slot antenna with offset slot. Several optimizations are necessary to precise physical parameters in the aim to fix the resonance frequency at 3.2 GHz. The proposed antenna possesses lightweight, simplicity, low cost, and circular polarization ensured by two feeding sources to permit right-hand and left-hand circular polarization process (RHCP and LHCP). The measured results compared with simulation results of the proposed circularly polarized EBG antenna with offset slot show good band operations with –10 dB impedance bandwidths of 9.1% and 36.2% centered at 3.2 GHz, which cover weather radar, surface ship radar, and some communications satellites bands. Our investigation will confirm the simulation and experimental results of the EBG antenna involving new EBG structures.

Design Method of a Circularly-Polarized Antenna Using Fabry-Perot Cavity Structure

  • Ju, Jeong-Ho;Kim, Dong-Ho;Lee, Wang-Joo;Choi, Jae-Ick
    • ETRI Journal
    • /
    • 제33권2호
    • /
    • pp.163-168
    • /
    • 2011
  • A Fabry-Perot cavity (FPC) antenna producing both high-gain and circularly-polarized (CP) behavior is proposed. To increase antenna gain and obtain CP characteristics, a superstrate composed of square patches with a pair of truncated corners is placed above the linearly polarized patch antenna with an approximately half-wavelength distance from the ground plane at the operating frequency. The proposed antenna has the advantages of high gain, a simple design, and an excellent boresight axial ratio over the operating frequency bandwidth. Moreover, used in an FPC antenna, the proposed superstrate converts a linear polarization produced by a patch antenna into a circular polarization. In addition, the cavity antenna produces left-hand circular-polarization and right-hand circular-polarization when a patch antenna inside the cavity generates x-direction and y-direction polarization, respectively. The measured and simulated results verify the performance of the antenna.

UHF RFID 시스템을 위한 Polarization Selective 안테나 설계 연구 (A Study on the Design of Polarization Selective Antenna for UHF RFID System)

  • 이사원;송우영
    • 한국항행학회논문지
    • /
    • 제14권2호
    • /
    • pp.170-175
    • /
    • 2010
  • 본 논문은 UHF RFID 시스템을 위해 편파를 선택할 수 있는 리더 안테나를 설계 및 구현하였다. 제안된 리더 안테나는 두 개의 급전부를 가지는 마이크로 스트립 패치 안테나와 두 개의 SPDT 스위치와 하나의 SP4T 스위치와 3dB hybrid coupler로 구성되어 있다. 각각의 스위치 전압을 조절하여 수직 방향의 선형 편파와 수평방향의 선형 편파, 좌수 원형 편파와 우수 원형 편파를 선택할 수 있다. 제안된 안테나는 902MHz ~ 928MHz 대역에서 VSWR 2:1을 만족하고 원형 편파로 선택되었을 때 AR (Axial Ratio)은 3dB 이하로 측정되었다. 또한 사용 환경 및 태그의 편파 방향에 적합한 편파를 선택할 수 있기 때문에 PLF (Polarization Loss Factor)를 최소화 할 수 있고 태그의 인식거리를 확장 시킬 수 있다.

UHF RFID 시스템을 위한 Polarization selective 안테나 연구 (UA Study on the Polarization Selective Antenna for UHF RFID System)

  • 이사원;송우영
    • 한국컴퓨터정보학회논문지
    • /
    • 제15권7호
    • /
    • pp.67-74
    • /
    • 2010
  • 본 논문은 UHF RFID 시스템을 위해 편파를 선택할 수 있는 리더 안테나를 설계 및 구현하였다. 제안된 리더 안테나는 두 개의 급전부를 가지는 마이크로 스트립 패치 안테나와 두 개의 SPDT 스위치와 하나의 SP4T 스위치와 3dB hybrid coupler로 구성되어 있다. 각각의 스위치 전압을 조절하여 수직 방향의 선형 편파와 수평 방향의 선형 편파, 좌수 원형 편파와 우수 원형 편파를 선택할 수 있다. 제안된 안테나는 902MHz~928MHz 대역에서 VSWR 2:1 기준으로 UHF RFID 주파수 대역인 902MHz~928MHz를 만족한다. 안테나의 최고이득은 X-Y Plane을 기준으로 선형 편파가 선택되어질 때 7.71dBi, 7.55dBi 로 측정되었고 원형 편파가 선택되어질 때 7.31dBic, 7.81dBic 로 측정되었다. 또한 원형 편파(LHCP, RHCP)가 선택 되어질 때 축비는 각각 2.01~2.83dB, 2.02~2.60dB로 측정되었고 이는 3dB 이하의 축비를 만족한다.

Circular Polarization Dielectric Resonator Antenna Excited by Single Loop Feed

  • Jeon, Sin-Hyung;Choi, Hyeng-Cheul;Kim, Hyeong-Dong
    • ETRI Journal
    • /
    • 제31권1호
    • /
    • pp.74-76
    • /
    • 2009
  • A new feeding method for the circular polarization (CP) dielectric resonator antenna (DRA) is proposed in this letter. Two orthogonal modes (${TE^x}_{{\delta}11}$, ${TE^y}_{1{\delta}1$) of the rectangular DRA are excited by a $90^{\circ}$ phase difference of the differential and common modes currents of the proposed feeding structure. To demonstrate the good CP performance of the proposed method, a right-hand CP DRA for a global positioning system was designed. The impedance bandwidth of the proposed antenna for $S_{11}$ < -10 dB and 3 dB axial ratio bandwidth are about 5.4% and 1.95% at 1.57 GHz, respectively.

  • PDF

슬롯/T-슬롯 커패시티브 커플링을 이용한 마이크로스트립 패치 안테나의 특성 연구 (A Study on the Characteristics of Microstrip Patch Antenna with Slot/T-Slot Capacitive Coupling)

  • 서기원;노형환;성영락;오하령;박준석
    • 전기학회논문지
    • /
    • 제59권7호
    • /
    • pp.1282-1288
    • /
    • 2010
  • This paper proposes a novel microstrip patch antenna to make impedance matching possible by using slot/T-slot capacitive coupling between the patch and 50 $\Omega$ feed line on a ground plane. The single band/linear polarization patch antenna shows linear polarization at 2.4 GHz band. Under -10 dB return loss, the single band/linear polarization patch antenna obtains 50 MHz bandwidth at 2.37 GHz~2.42 GHz. The dual band/dual polarization microstrip patch antenna shows circular polarization at 2.4 GHz band and linear polarization at 3.1 GHz band. Under -10 dB return loss, The dual band/dual polarization microstrip patch antenna obtains 340 MHz bandwidth at 2.23~2.57 GHz and 375 MHz bandwidth at 2.95~3.325 GHz.

평판형 방사소자를 이용한 원형편파용 혼 안테나 설계 (Conformal Horn Antenna for Circular Polarization using Planar-type Radiator)

  • 정영배
    • 전기전자학회논문지
    • /
    • 제16권3호
    • /
    • pp.173-176
    • /
    • 2012
  • 본 논문에서는 평판형 방사소자를 이용한 새로운 원형편파용 혼 안테나를 제안한다. 본 안테나는 평판형 마이크로스트립 안테나와 구형 혼으로 구성되며, 혼 내부에 삽입되는 마이크로스트립 안테나는 혼에 전력신호를 여기하는 급전부이자 편파기로서 동작한다. 또한, 마이크로스트립 안테나는 고이득, 높은 고립도 특성과 함께 광대역을 구현하기 위하여 금속 스페이서를 삽입한 적층형 구조로 설계되었다. 제안된 구조를 통하여, 혼 안테나는 급전부와 편파기와 같은 부가적인 구조를 별도로 설계하지 않음으로써 안테나의 소형화를 도모할 수 있다. 제안된 안테나는 8.6dBi의 이득과 4.8%의 3-dB 축비 대역폭을 가지며, 특히, 높은 대역에서 원형편파로 동작되는 이동통신 및 위성통신 분야의 다양한 안테나 시스템에 적용될 수 있다.

Reconfigurable Circularly Polarized Microstrip Antenna on a Slotted Ground

  • Yoon, Won-Sang;Han, Sang-Min;Pyo, Seong-Min;Lee, Jae-Hoon;Shin, In-Chul;Kim, Young-Sik
    • ETRI Journal
    • /
    • 제32권3호
    • /
    • pp.468-471
    • /
    • 2010
  • A compact square patch antenna with reconfigurable circular polarization (CP) at 2.4 GHz is proposed. Circular polarization is generated by an arc-shaped slot on the ground plane. In order to switch the CP orientation, the current flow direction of the patch is reconfigured via the PIN diodes mounted on the slot. As the slot and bias circuit are not placed on the patch side, the proposed antenna radiates a CP wave without alteration in the main beam direction. From the experimental results, the impedance and CP bandwidths of the proposed antenna have been demonstrated for up to 80 MHz and 25 MHz, respectively.