• 소음진동
• /
• 제10권6호
• /
• pp.998-1008
• /
• 2000

The continuous circular cylindrical shells are widely used for the high performance structures of aircraft, spacecraft, missile, nuclear fuel rod shell etc.. In this paper, a method for the free vibration analysis of the continuous circular cylindrical shells with the multiple simple supports is developed by using the receptance method. With this method, the vibrational characteristics of the continuous system is analyzed by considering as a combined structure. The system receptance is also derided by the application of the equilibrium of forces and the continuity of displacements at the support points. The natural frequencies and mode shapes are calculated numerically and they are compared with the FEM results to improve the reliability of analytical solution. Numerical results on the 4-equal-span continuous circular cylindrical shell are presented in this paper.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권2호
• /
• pp.151-161
• /
• 2016

In this paper, we present a $C^3$ quartic B-spline approximation of circular arcs. The Hausdorff distance between the $C^3$ quartic B-spline curve and the circular arc is obtained in closed form. Using this error analysis, we show that the approximation order of our approximation method is six. For a given circular arc and error tolerance we find the $C^3$ quartic B-spline curve having the minimum number of control points within the tolerance. The algorithm yielding the $C^3$ quartic B-spline approximation of a circular arc is also presented.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.49-50
• /
• 2014

본 논문에서는 UWB 대역에서 동작하는 광대역 루프 안테나에 대한 설계 방법을 연구하였다. 제안된 광대역 루프안테나는 초광대역 특성을 얻기 위하여 원형 루프 안테나에 중앙 급전점과 연결하는 원형 섹터가 추가된 형태이다. 원형 섹터 사이의 간격과 원형 루프의 반지름 변화에 따른 입력 반사계수와 이득 특성을 분석하여 최적의 설계 변수를 도출하였다. 최적화된 인쇄형 광대역 루프 안테나를 FR4 기판 상에 $41mm{\times}41mm$ 크기로 제작하였다. 실험 결과, 전압 정재파비(VSWR; voltage standing wave) < 2.25인 대역이 3.1-11.0 GHz으로 UWB 대역에서 동작하는 것을 확인하였다.

• 대한토목학회논문집
• /
• 제10권4호
• /
• pp.103-112
• /
• 1990

본 연구는 실제크기의 첨성대 모형을 피사체로 선정하여 측정용 카메라에 의해 원형 strip과 Block을 형성한 후, bundle조성으로 촬영거리와 기준점 배치에 따른 정확도를 다양하게 분석하고 strip조합해석의 특성을 규명하므로써 전면(全面)해석을 요하는 각종 문화재 특히 원통형 구조물에 대한 최적 해석기법을 제시한 것이다. 연구결과 어느 일면에 배치된 기준점 만으로도 전면해석이 가능하며, 기준점수에 비해 그 배치가 정도에 보다 큰 영향을 미침을 알 수 있었다. 또한 구조물의 전면해석시 기준점은 X, Y, Z축 평면상에 고루 배치하는 것이 이상적이며, 근접촬영하여 strip조합수에 증가시킴에 따라 정확도가 현저히 향상되었다.

• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.1029-1034
• /
• 2010

본 논문은 회전체의 진원도 및 흔들림 정밀도 측정에 관한 연구이다. 일반적으로 가공물 진원도 측정은 정밀한 회전테이블 또는 기준 원형 디스크를 필요로 하여, 고가의 비용이 소요된다. 축차2점법은 2개의 변위센서를 사용하여 직선가이드 등에서진직도 측정을 위하여 사용되었으며, 본 연구에서는 이 방법을 회전체에 적용하였다. 한 개의 디스크를 이용하여 측정된 회전체 변위 측정값에서 장치의 회전시 흔들림 오차를 제거하여 회전체의 순수한 진원도 프로파일을 측정하였다. 본 연구는 정밀한 기준 디스크 (Artifact)를 사용하지 않고 원형 가공물의 진원도 프로파일 측정에 유용할 것이다.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.37-44
• /
• 2018

In laser material processing for high thermal conductivity, the thermal effect of laser beam shape was examined through computer simulations. In this paper, a circular beam with a focal radius of $500{\mu}m$, an elliptical beam with a major axis of 4 mm and a minor axis of 1 mm, and a rotating beam with a focal radius of $500{\mu}m$ and an angular velocity of 5 rad/sec were compared. Simulation results showed that there was no clear difference in the maximum temperature between the circular focus and the elliptical shape, but the heating and cooling rates were different. The simulation result for a laser beam rotating in a circular pattern with a radius of 5 mm showed an asymmetric temperature rise due to the combination of linear and rotational motion. At points where the rotational and linear speeds combined, the temperature gradually rose and reached the maximum temperature; whereas at points where the rotational and linear speeds were attenuated, the temperature tended to gradually decrease after reaching the maximum temperature. Based on the results of this study, the authors expect to be able to optimize laser material processing by designing patterns of laser beams.

• Steel and Composite Structures
• /
• 제17권4호
• /
• pp.371-386
• /
• 2014

This paper presents a tri-linear restoring force model based on the test results of 12 circular RC columns strengthened by CFRP strips under low cyclic loading. The pre-stress of CFRP strips and axial load ratio of specimens are considered as the affect parameters of the proposed model. All essential characteristics of the hysteretic behavior of the proposed model, including the hysteretic rules, main performance points, strength degradation, stiffness degradation and confinement effects are explicitly analyzed. The calculated results from the proposed model are in good agreement with the experimental results, which shows that the recommended model can be reliably used for seismic behavior predictions of circular RC columns strengthened by pre-stressed CFRP strips.

• Structural Engineering and Mechanics
• /
• 제52권4호
• /
• pp.767-786
• /
• 2014

This paper presents the design of reinforced concrete circular footings subjected to axial load and bending in two directions using a new model. The new model considers the soil real pressure acting on contact surface of the circular footings and these are different, with a linear variation in the contact area, these pressures are presented in terms of the axial load, moments around the axis "X" and the axis "Y". The classical model takes into account only the maximum pressure of the soil for design of footings and it is considered uniform at all points of contact area. Also, a comparison is presented in terms of the materials used (steel and concrete) between the two models shown in table, being greater the classical model with respect the new model. Therefore, the new model is the most appropriate, since it is more economic and also is adjusted to real conditions.

• 한국농공학회지
• /
• 제33권2호
• /
• pp.94-103
• /
• 1991

This study was carried out to investigate the engineering characteristics of the R.C circular ring sector plate with various boundary conditions and then to propose a rational and paraical method for application of finite element method to R.C structures. The stiffness matrix of the circular ring sector plate was obtained by using the multi-base coordinate system in which the base-coordinate systems were constructed for each nodal point of the quadrilateral element in order to reflect the complicated boundary conditions conveniently and correctly. The R.C element stiffness matrix was constructed by adding the stiffness coefficients of the steel-bar element into the plate bending element stiffness matrix. Herein, the steel-bar element was treated as the common beam element. Using the above method, the effects of steel-bar can be considered without increasing of the numbers of element and nodal points.

• Tribology and Lubricants
• /
• 제28권1호
• /
• pp.27-32
• /
• 2012

Oval gears are typical kinds of non-circular gears and are widely used in flow meters. This paper presents a tooth profile design of an oval gear according to the curvature of the pitch curve. The length of the pitch oval is divided by the number of teeth and the curvature of the divided points is obtained. The tooth profile is designed on the circle of the curvature as if it is the pitch circle of a gear. The teeth of the oval gear have the same module and pressure angle, but the pitch circle of each tooth differs in size. Thus, the teeth on the divided points of the pitch oval are different in shape. This type of oval gear will improve the meshing properties.