• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.26-36
• /
• 1994

The comparative wood anatomy of 1 species belonging to genus Myrica of Myricaceae, 9 species to genus Populus and 8 species to genus Salix of Salcaceae, occurring in Korea, was described and coded according to IAWA list(Wheeler, 1989). Myrica rubra. of Myricaceae is a typical diffuse-porous wood with numerous vessels per $mm^2$ and its pores are mainly angular in outline. Vessels scalariform perforation plates with a few bars, very small inter vessel pits; axial parenchyma abundant, diffuse or diffuse-in-aggregates which is distinct and easily observed on cross section; rays 1-3 seriate, Kribs' heterogeneous I or II types, frequently contains rhomboidal crystals; Dark pigmented substances included in some rays and axial parenchyma. Salicaceae, a typical diffuse porous wood, has mainly radial pore multiple, large intervessel pits, distinct alternate pits, simple perforation plates, ray-vessel pits with circular large pits, uniseriate rays, marginal parenchyma composed of 1-2 layers. In some species, ray parenchyma contain crystals. Populus and Salix wood can be distinguished from one another by the following characters. Pores of Populus woods almost angular in outline. Uniseriate homogeneous rays slightly higher than Salix and long linear on tangential section. Whereas Salix woods appear the pores almost oval, uniseriate heterogeneous rays, which are smular narrow fusiform on tangential section and lower in height than Populus.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.270-278
• /
• 2020

In this paper, sound transmission of Micro-Perforated Plates (MPPs) installed in an impedance tube with a circular cross-section is described using an analytic method. Vibration of the plates is expressed in terms of an infinite series of modal functions, where modal function in the radial direction is given by the Bessel function. Under the plane wave assumption, a low frequency approximation is derived, and a formula for the sound transmission coefficient of multi-layered MPPs is presented using the transfer matrix method. The Sound Transmission Losses (STLs) of single and double MPPs are computed using the proposed method and compared with those done by the Finite Element Method (FEM), which shows an excellent agreement. As the perforation increases, the STL is degraded, since the STL becomes dominated by the perforation ratio rather than by vibration of the plate. The STL shows dips at natural frequencies as well as at the mass-spring-mass resonance frequency. The proposed model for the STL prediction in this study can be applied to an arbitrary number of MPPs, where each MPP may or may not have a perforation.

• Korean Journal of Plant Taxonomy
• /
• v.45 no.4
• /
• pp.323-331
• /
• 2015

Pollen morphological characteristics of 7 taxa of the genus Aruncus L. (Rosaceae) were examined using scanning electron microscopy (SEM) to evaluate the taxonomic implication within the genus. Aruncus pollen grains were monad, tri-colporate with granular membranes, small in size ($P=8.33-12.57{\mu}m$, $E=8.93-14.40{\mu}m$), amb is sub-circular to circular, suboblate to prolate-spheroidal in shape (P/E = 0.68-1.70). The sexine ornamentation in all studied taxa was basically striate but existence of perforation (striate-perforate: A. dioicus, A. dioicus var. acuminatus, A. dioicus var. astilboides, A. dioicus var. pubescens, A. dioicus var. vulgaris; striate-pstilate: A. dioicus var. aethusifolius, A. gombalanus) and the widths of muri and grooves varied according to the taxa. In particular, relatively short, and sharply crested muri being a distinct feature of A. dioicus var. acuminatus. As a result, the various combination of each pollen characteristics could be useful to identify the some taxa of the genus Aruncus.

• Steel and Composite Structures
• /
• v.25 no.4
• /
• pp.505-521
• /
• 2017

The steel plate shear wall with beam-only connected infill plate (SSW-BO) is an innovative lateral load resisting system consisting of infill plates connected to surrounding beams and separated from the main columns. In this research, the effects of perforation diameter as well as slenderness ratios of infill plates on the hysteresis behavior of SSW-BO systems were studied experimentally. Experimental testing is performed on eight one-sixth scaled one-story SSW-BO specimens with two plate thicknesses and four different circular opening ratios at the center of the panels under fully reversed cyclic quasi-static loading in compliance with the SAC test protocol. Strength, stiffness, ductility and energy absorption were evaluated based on the hysteresis loops. It is found that the systems exhibited stable hysteretic behavior during testing until significant damage in the connection of infill plates to surrounding beams at large drifts. It is also seen that pinching occurred in the hysteresis loops, since the hinge type connections were used as boundaries at four corners of surrounding frames. The strength and initial stiffness degradation of the perforated specimens containing opening ratio of 0.36 compared to the solid one is in the range of 20% to 30% and 40% to 50%, respectively.

• Structural Engineering and Mechanics
• /
• v.53 no.1
• /
• pp.73-87
• /
• 2015

In case of aircraft impact on nuclear containment structures, the initial kinetic energy of the aircraft is transferred and absorbed by the outer containment, may causing either complete or partial failure of containment structure. In the present study safety analysis of BWR Mark III type containment has been performed. The total height of containment is 67 m. It has a circular wall with monolithic dome of 21m diameter. Crash analysis has been performed for fighter jet Phantom F4. A normal hit at the crown of containment dome has been considered. Numerical simulations have been carried out using finite element code ABAQUS/Explicit. Concrete Damage Plasticity model have been incorporated to simulate the behaviour of concrete at high strain rate, while Johnson-Cook elasto-visco model of ductile metals have been used for steel reinforcement. Maximum deformation in the containment building has reported as 33.35 mm against crash of Phantom F4. Deformations in concrete and reinforcements have been localised to the impact region. Moreover, no significant global damage has been observed in structure. It may be concluded from the present study that at higher velocity of aircraft perforation of the structure may happen.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.202-223
• /
• 2020

This purpose of this article is to identify the original form of the gilt-bronze ornamental pieces unearthed from the east part of the third wooden coffin in the Naju Bogam-ri Jeongchon (NBJ) tombs. The gilt-bronze ornamental pieces were all small, measuring less than 3cm in size and about 0.2cm in thickness, and only 19 or more small pieces were identified. In each piece of gilt decoration, a circular perforation, convex pattern, leaf-shaped spangle (瓔珞), 2 small holes for attaching spangles and gilt-bronze thread, 2 small holes for unknown purposes, and a continuous dot pattern of about 0.05 cm can be observed. As a result, it was judged that the gilt-bronze pieces excavated from the NBJ No. 1 chamber were part of the Headband Crown. Therefore, type 1 and type 3 of the gilt-bronze pieces were determined to be part of the Headband, and type 2 to be part of the Vertical Ornaments. Based on previous results, two types of restoration were proposed for NBJ No. 1 tomb gilt-bronze ornaments. In the first restoration proposal, there are wave-shaped dot patterns on the top and bottom of the crown, and the middle decoration is a spangle, circular perforation and spangle and a convex-pattern. In the second restoration plan, one row of convex patterns was added among the decorations in the middle of the first. The same type of vertical ornament was found in the Sochang (小倉) collection crown, but the overall structure and shape of the crown were completely different. On the other hand, the use of small holes of unknown use, as seen in the crown, was presumed to represent holes for fixing to a cap of organic matter. The restored NBJ No. 1 tomb gilt-bronze crown is characterized by circular punching, which makes it difficult to find an analogy in the other Three Kingdoms-period crowns. Unlike the existing halls in Gaya, Mahan, and Baekje, each district has a unique shape and decoration. The gilt-bronze crown excavated from NBJ No. 1 tomb is thought to reflect these characteristics.

• Solar Energy
• /
• v.13 no.2_3
• /
• pp.45-52
• /
• 1993

The benefits of thermal stratification in sensible heat storage were investigated for residential solar applications. The effect of increased thermal useful efficiency of hot water stored in an actual storage tank due to stratification has been discussed and illustrated through experimental data and computer simulation, which were taken by changing dynamic and geometric parameters. When the flow rate was 8 liter/min and ${\Delta}T=40^{\circ}C$ was $40^{\circ}C$, the useful efficiency(${\eta}_u$) was about 90% in case of using a distributor, but not using a distributor the useful efficiency(${\eta}_u$) was about 82%. So these kinds of distributor would be recommendable for a hot water storage system and residential solar energy application to increase useful efficiency(${\eta}_u$). In the case of the uniform circular distributor, when the flow rate was 8 liter/min partial mixing was decreased and a stable stratification was obtained. Furthermore, if the distrbutor was manufactured so that the flow is to be the same from all perforations in order to enhance stratification, it might be predicted that further stable stratification and higher useful efficiency(${\eta}_u$) are obtainable.