• 제목/요약/키워드: Circle draw test

검색결과 6건 처리시간 0.018초

종골 골절 후 거골하 관절면의 전위 정도와 운동 범위의 상관 관계 (Correlationship Between Degree of Displacement and Range of Motion of the Subtalar joint after Calcaneal fracture)

  • 박인헌;이기병;송경원;이진영;이응주;박래성
    • 대한족부족관절학회지
    • /
    • 제2권1호
    • /
    • pp.19-29
    • /
    • 1998
  • The characteristics of the patients after the calcaneal fracture that were associated with an unsatisfactory outcome were subtalar incongruity, decreased Bohler angle ratio of the fractured to the normal side, an age of more than fifty years, work involving strenuous labor, and increased time missed from work due to the injury. The purpose of this study was to examine the reliability of measurements of the range of motion of the subtalar joint. To determine reliability, evaluates of the correlatioinship between the degree of the displacement of the subtalar joint and Circle draw test after the calcaneal fracture. Fifty patients who had had fifty five calcaneal fractures were managed with open reduction and internal fixation. The results were reviewed retrospectively, between 4months and three years after the operation, with use of an evaluation system for the subtalar joint and with plain radiographs. At follow up evaluation, the result was assessed on the basis of restoration of anatomy and function of the subtalar joint. We evaluated the subtalar joint with plain films that consist of anteroposterior projection, lateral projection, calcaneal axial view, and Broden's view, and the measurements of the displacement of the subtalar joint surface after the calcaneal fracture. And we evaluated the range of motion of the subtalar joint with Circle draw test for physical evaluation. Circle draw test was evaluated and demonstrated the motion of flexion-supination-adduction and extension-pronation-abduction of the subtalar joint. And there are correlationship between the degree of the displacement and range of motion of the subtalar joint after the calcaneal fracture. The report critically reviews methords used to measure Circle draw test for physical examination of the follow up after the calcaneal fracture.

  • PDF

선회권시험방법에 의한 신침로거리의 산정방법에 관한 연구 (The Method to Calculate the New Course Distance of a Ship by Turning Circle Test Method)

  • 김기윤
    • 수산해양기술연구
    • /
    • 제30권4호
    • /
    • pp.299-311
    • /
    • 1994
  • The new course distances of a ship are one of the important factors of the safety handling as the indices to indicate directly her abilities of course alteration. Recently, International Maritime Organization (IMO) exhorts that all vessels should use maneuvering booklets in which are drawn the curves of new course distances obtained from the test of measuring them and noted other maneuvering performance standard in various navigation conditions. This paper describes the method to calculate many new course distances for many rudder angles by turning circle test without observation or using other calculating methods. The main results are as follows: 1) The mean difference of the distances between two new course distances by the turning circle test and heading test of the experimental ship was about 7.7% vaules of the ones by the heading test. when her altering angles were $48^{\circ}$, $63^{\circ}$and $70^{\circ}$, using the rudder angle of $35^{\circ}$ . These new course distances were therefore found to be small in difference of those. 2) The mean difference of the distance between two new course distances by the turning circle test and the maneuvering indices of the experimental ship was about 4.5% values of the ones by the maneuvering indices, when her altering angles were $48^{\circ}$, $63^{\circ}$and $70^{\circ}$, using the rudder angle of $35^{\circ}$, these new course distances were therefore found to be small in difference of those. 3) The mean difference of the distance between two new course distances by the turning circle test and the observation of the experimental ship was about 6.1% values of the ones by the observation, when her altering angles were $48^{\circ}$, $63^{\circ}$and $70^{\circ}$, using the rudder angle of $35^{\circ}$. These new course distances were therefore found to be small in difference of those. 4) It is confirmed that many new course distances for many angles can be calculated easily by using the method of ship's simple turning circle test, without observation or using the maneuvering indices and heading test method. 5) It is considered to be helpful for the safety of ship handling to draw curves of new course distances by turning circle test and $\phi_4$ - $\phi_2 by heading test, and utilize them at sea.

  • PDF

양측 종골 골절 환자의 치료 후 임상적 및 방사선학적 결과 (Clinical and Radiological Results of Treatment in Bilateral Calcaneal Fracture)

  • 이정길;김갑래;현윤석;구본재;이효범;이재희
    • 대한족부족관절학회지
    • /
    • 제16권4호
    • /
    • pp.229-234
    • /
    • 2012
  • Purpose: The purpose of this study is to find out clinical and radiological outcomes in 70 patients of both calcaneal fracture. Materials and Methods: From March 1993 to March 2011, 70 patients underwent non-operative management or operative management at our hospital. Conservative management was performed in 15 cases of undisplaced fracture (Group A). Operative management was performed in 125 cases including 32 cases of undisplaced fracture (Group B), 60 cases of joint depression type fracture (Group C), 33 cases of tongue type fracture (Group D). Results were evaluated by VAS score, AOFAS score, circle draw test, Bohler angle (BA), Gissane angle, width & height of calcaneus. Results: VAS scores were 2.0 in group A, 2.0 in group B, 2.2 in group C, 2.7 in group D. AOFAS scores were 90.4 in group A, 91.9 in group B, 72.2 in group C, 79.2 in group D. Circle draw tests were 8.4 cm in group A, 10.1 cm in group B, 7.6 cm in group C, 7.9 cm in group D. Bohler angles (BA) and Gissane angles were $19.1^{\circ}$, $96.7^{\circ}$ in group A, $21.8^{\circ}$, $119.1^{\circ}$ in group B, $26.3^{\circ}$, $121.2^{\circ}$ in group C, $19.7^{\circ}$, $119.7^{\circ}$ in group D. Calcaneal widths and heights were 39.5 mm, 31.6 mm in group A, 32.7 mm, 37.0 mm in group B, 34.4 mm, 39.2 mm in group C, 35.2 mm, 38.7 mm in group D. Conclusion: The main cause of bilateral calcaneal fracture is an injury from a fall, and the cases were more frequently occurred in men than women. Also the fracture in the right side tend to occur more severely compared to the left side. The surgical treatment shows better results than conservative treatment in bilateral calcaneal fracture.

제한적 후방 도달법을 이용한 관절내 종골 골절의 치료 (Limited Posterior Approach for the Surgical Treatment of Intraarticular Fracture of Calcaneus)

  • 현윤석;송경원;신성일;이진영;이승용;김갑래;신건호;서은호;반태서
    • 대한족부족관절학회지
    • /
    • 제11권1호
    • /
    • pp.79-85
    • /
    • 2007
  • Purpose: To evaluate the clinical efficacy of the limited posterior approach for the surgical treatment of intraarticular fracture of calcaneus. Materials and Methods: From March 2000 to February 2006, we studied retrospectively 186 patients, 203 cases who were treated with open reduction and internal fixation through limited posterior approach and were followed up for more than 1 year. The clinical results were evaluated with Creighton-Nebraska score and circle draw test after 1 year. We checked simple AP, lateral, axial and Broden's view preoperatively and 1 year after surgery, and compared $B{\ddot{o}}hler$ angle and Gissane angle. Results: By Creighton-Nebraska score, Sanders type 2 was 86.4, type 3 was 74.3, type 4 was 62.4. And by circle draw test, type 2 was 8.9 cm, type 3 was 7.2 cm, type 4 was 5.9 cm. $B{\ddot{o}}hler$ angle and Gissane angle were $7.6^{\circ}$, $102.4^{\circ}$, and it increased to $23.5^{\circ}$, $128.6^{\circ}$ after postoperative 1 year. Conclusion: Limited posterior approach for the surgical treatment of intraarticular fracture of calcaneus was considered to an effective treatment modality.

  • PDF

최소 침습적 정복술 및 금속강선 고정술을 이용한 전위된 관절내 종골 골절의 치료 (Minimally Invasive Reduction and Pin Fixation Treatment for Displaced Intraarticular Calcaneal Fracture)

  • 이진영;박인헌;김갑래;김태화;오범석
    • 대한족부족관절학회지
    • /
    • 제14권1호
    • /
    • pp.66-72
    • /
    • 2010
  • Purpose: To evaluate the clinical efficacy of the minimally invasive posterior approach for the surgical treatment of intraarticular fracture of calcaneus. Materials and Methods: From March 2006 to October 2008, we studied retrospectively 45 patients, 56 cases who were treated with minimally invasive reduction and pin fixation treatment for displaced intraarticular calcaneal fracture and were followed up for more than 1 year. The clinical results were evaluated with Creighton-Nebraska score and AOFAS score, circle draw test after 1 year. We checked simple AP, lateral, axial and Broden's view preoperatively and 1 year after surgery, and compared Bohler angle and Gissane angle. Results: By Creighton-Nebraska score, Sanders type 1 was 81, type 2 was 75, type 3 was 69, type 4 was 61. By AOFAS score, Sanders type 1 was 88, type 2 was 82, type 3 was 78, type 4 was 63. And by circle draw test, type 1 was 8.8 cm, type 2 was 8.5 cm, type 3 was 8 cm, type 4 was 6.6 cm. Preoperative Bohler angle and Gissane angle were $7.2^{\circ}$, $98^{\circ}$, and it increased to $21.2^{\circ}$, $116^{\circ}$ after postoperative 1 year. Conclusion: Minimally invasive reduction and pin fixation treatment for displaced intraarticular calcaneal fracture was considered to be an effective treatment modality.

자동차용 타원형 디프 드로잉 제품의 다이 반경에 관한 연구 (Study on the Influence of Die Corner Radius for Deep Drawing of Elliptical Product of Automobile)

  • 허영민;박동환;강성수
    • 소성∙가공
    • /
    • 제11권8호
    • /
    • pp.668-675
    • /
    • 2002
  • The circles deform into various shape during deformation, the major and minor axes of which indicate the direction of the major and minor principal strains. Likewise, the measured dimensions are used to determine the major and minor principal strain magnitudes. This circular grid technique of measuring strains can be used to diagnose the causes of necking and fracture in industrial practice and to investigate whether these defects were caused by material property variation, changes in lubrication, of incorrect press settings. In non-axisymmetric deep drawing, three modes of forming regimes are found: draw, stretch, plane strain. The stretch mode for non-axisymmetric deep drawing could be defined when the major and minor strains are positive. The draw mode could be defined when the major strain is positive and minor strain is negative, and plane strain mode could be defined when the major strain is positive and minor strain is zero. Through experiments the draw mode was shown on the wall and flange are one of a drawn cup, while the plane strain and the stretch mode were on the punch head and the punch corner area respectively, We observed that the punch load of elliptical deep drawing was decreased according to increase of die corner radius and the thickness deformation of minor side was more large than major side.