• Korean Journal of Ecology and Environment
• /
• v.44 no.2
• /
• pp.178-186
• /
• 2011

This study was conducted to investigate runoff characteristics of non-point pollutant sources in an agricultural area watershed in Boeun area, Chungbuk Province. The monitoring site represented 1.56 $km^2$, about 44.4% of which was covered with paddy fields. The monitoring was conducted for six events in a period of 5 month. Event Mean Concentration (EMC) and Site Mean Concentration (SMC) of suspended solids (SS), biochemical oxygen demand (BOD), chemical oxygen demand (COD), total nitrogen (T-N) and total phosphorus (T-P) were calculated using the results of the water quality parameters. A comparison between arithmetic mean concentration and EMC revealed that nearly all EMCs were higher than the corresponding arithmetic mean concentrations. First-flushing effects were exhibited for SS, BOD, and T-P, with relatively high concentrations in early-stage storm events.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.514-519
• /
• 2020

Graphite materials for lithium ion battery anode materials are the most commercially available due to their structural stability and low price. Recently, research efforts have been conducted on carbon coatings by improving side reactions at the edge site of carbon materials. The carbon coating process has classified into a CVD by chemical reaction, wet coating process with solvent and dry coating by mechanical impact. In this paper, the rapid crush/coating process was used to solve the problem of which only few parts of the carbon precursor (pitch) can be used and also environmental problems caused by solvent removal in the wet coating process. When the ratio of needle coke to pitch was 8 : 2 wt%, and the rapid crush/coating process was carried out, it was confirmed that the fracture surface was coated by pitch. The pitch-coated sample was treated at 2400 ℃ and 41.8% improvement in 10C/0.1C rate characteristic was observed. It is considered that the material simply manufactured through the simple crush/coating process can be used as an anode electrode material for a lithium ion battery.

• Journal of Life Science
• /
• v.21 no.11
• /
• pp.1549-1557
• /
• 2011

Tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) can selectively induce apoptosis in many types of transformed cells; however, some human hepatocellular carcinoma cells are particularly resistant to the effects of TRAIL. Although genistein, a natural isoflavonoid phytoestrogen, has been shown to have pro-apoptotic activity against human cancer cell lines, little is known about the mechanism of genistein in terms of TRAIL-induced apoptosis. In the present study, it was investigated whether or not combined treatment with genistein and TRAIL synergistically induced apoptosis in Hep3B hepatocarcinoma cells. Results indicate that treatment with TRAIL in combination with nontoxic concentrations of genistein sensitized TRAIL-resistant Hep3B cells to TRAIL-induced apoptosis, which was associated with mitochondrial dysfunction. Further, the inhibition of p38 mitogen-activated protein kinase (MAPK) activation markedly decreased genistein and TRAIL-induced cell viability and apoptosis by enhanced truncation of Bid, increase of pro-apoptotic Bax, decrease of anti-apoptotic Bcl-2, and release of cytochrome c from mitochondria to cytoplasm. Activation of caspases and degradation of poly (ADP-ribose) polymerase induced by the combined treatment was also markedly increased by the inhibition of p38 MAPK, through the mitochondrial amplification step. In conclusion, our data suggest that genistein sensitizes TRAIL-induced-apoptosis via p38 MAPK-dependent pathway.

• Journal of Life Science
• /
• v.23 no.1
• /
• pp.24-30
• /
• 2013

The purpose of this study was to identify genetic polymorphisms of the mitochondrial cytochrome b (mtDNA cyt b) gene in Korean black (KB) cattle breed and to analyze the genetic relationship between the KB and other breeds. We determined the complete sequence of the mtDNA cyt b gene in 38 KB cattle. We also analyzed their genetic diversity, and phylogenetic analysis was performed by comparison with Korean cattle (KC, called Hanwoo) and breeds from China and Japan. A nucleotide substitution was detected in the KB cattle, and two haplotypes were defined. In the neighbor-joining (NJ) tree, the haplotypes of KB were located in Bos taurus lineage with those of KC, Japanese black (JB), Yanbian and Zaosheng breeds. However, the haplotypes of Chinese breeds, excluding Yanbian and Zaosheng, were separated into B. taurus and B. indicus lineages. In the NJ tree of breeds based on Dxy genetic distances, Chinese breeds mixed with B. taurus and B. indicus lineages were located between B. indicus and B. taurus lineages. KB was contained within B. taurus lineage and was determined to be genetically more closely related to two Chinese (Yanbian and Zaosheng) breeds than to KC and JB. The haplotype distribution and the results of the phylogenetic analysis suggest that KB and KC have genetic differences in their mtDNA cyt b gene sequences.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.91-99
• /
• 2017

The purpose of this paper is to evaluate the flexural performance of reinforced concrete (RC) beams repaired with polymer mortar. The repaired and non-repaired 13th beams which was fabricated by considering repair position, repair depth, and curing age of polymer mortar as test variables were tested under three point loading. All specimens repaired in compressive and tensile zone did not fail due to interfacial failure between polymer mortar and concrete but failed when the strain of repaired mortar exceeded the ultimate tensile strain of polymer mortar. Maximum load of specimens repaired in compressive zone was similar to that of non-repaired specimen, reference specimen. Additionally, their ductility index was higher than that of reference specimen. On the other hand, specimens repaired in tensile zone failed very brittlely and have a lower ductility index than reference specimen. Nonlinear analysis by using OpenSees was performed to predict the behavior of RC beam repaired with polymer mortar. Two dimension frame element was used to simplify an analysis model and fiber model was applied to consider the material non-linearity. It was confirmed from the analysis results that nonlinear analysis properly predicts the behavior of specimens repaired in compressive zone and overestimates the behavior of specimens repaired in tensile zone.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.177-182
• /
• 2010

The flow of a universal system-level design methodology consists of system specification, system-level hardware/software partitioning, co-design, co-verification using virtual or physical prototype, and system integration. In the developing process of a hardware component in system, the design phase has been regarded as a phase consuming lots of time and cost. However, the verification phase in which functionality of the designed component is verified has recently been considered as a much important phase. In this paper, the implementation of a verification environment which is based on SystemC infrastructure and verifies the functionality of a hardware component is described. The proposed verification system uses SystemC user-defined channel as communication interface between variables of SystemC module and registers of Verilog module. The functional verification of an UART is performed on the proposed verification system. SystemC provides class library for hardware modeling and has an advantage of being able to design a system consisting hardware and software in higher abstraction level than register transfer level. Source codes of SystemC modules are reusable with a minor adaptation on verifying functionality of another hardware component.

• Korean Journal of Food Science and Technology
• /
• v.33 no.3
• /
• pp.319-326
• /
• 2001

Red wines were prepared with Campbell Early harvested at Youngdong, Chungbuk Province in 1999 of which average sugar content and total acidity(tartaric acid %) were $12^{\circ}Brix$ and 0.7%, respectively. In order to investigate the effect of addition of various sugars on the quality of red wine, sucrose, xylitol, glucose, corn syrup, high fructose corn syrup(HFCS) and isomaltooligosaccharide(IMO) were added to musts to have $21^{\circ}Brix$ of sugar content. Fermentation of red wine in which glucose was added was faster than any other sugars with the final ethanol content of 12%(v/v). Wines to which sucrose and HFCS were added showed similar fermentation rates to glucose added one but alcohol contents were 10.3%(v/v) and 11.2%(v/v), respectively. Alcohol contents of wines made with xylitol, corn syrup and IMO was relatively low to about 7% (v/v) after fermentation. The pH values of wines were almost unchanged in all treatments during fermentation and the total acidities of wines were decreased from 0.7% to lower than 0.3%. The colors of wines were changed to redder and darker during fermentation. In sensory evaluation xylitol added wine showed the best preference and kept xylitol unfermented in it.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.516-521
• /
• 1999

The average sugar content and total acidity (tartaric acid %) in Campbell Early harvested at Youngdong, Chungbuk in 1998 were $11{\sim}16^{\circ}Brix\;and\;0.7{\sim}1.1%$, respectively. Extra sugar should be added to musts to have higher than 12% of alcohol content for red wine fermentation. When extra sugar and active dry yeast were added to Campbell Early must, wine fermentation was ended after 9 days at $25^{\circ}C$. The ethanol content was 14.7% (v/v). However, when sugar was added only without yeast, wine fermentation was ended up at 14. 4% (v/v) of ethanol after 15 days. The total acidity (tartaric acid %) and pH was almost unchanged during both fermentations. Potassium metabisulfite was found to inhibit the propagation of bacteria without affecting red wine fermentation. But when potassium metabisulfite was directly added to young red wine after fermentation, the red color of wine was decolorized to yellow.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.5
• /
• pp.545-553
• /
• 2017

Microalgae can offer an attractive way of generating renewable and sustainable biodiesel. Biodiesel derived from microagae can have lower impact on the environment and food supply than biodiesel produced from crops. But biodiesel derived from microagae have poor fuel properties at low temperature depending on their species. In this study, it was investigated that fuel characteristics of biodiesel derived from Tetraselmis sp. and cold weather performance of biodiesel blend (BD3, 3 vol.% biodiesel - 97 vol.% diesel). The startability and operability of the passenger car in BD3 was good at $-20^{\circ}C$.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.2
• /
• pp.87-96
• /
• 2004

Application of the soil nailing method is continuously extending in maintaining stable excavations and slopes. However, ground anchor support system occasionally may not be used because of space limitations in urban excavation sites nearby the existing structures. In this case, soil nailing system with relatively short length of nails could be efficiently adopted as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in an excavation zone of the existing weak subsoils. Pretensioning the soil nails then could play important roles to reduce deformations mainly in an upper part of the nailed-soil excavation system as well as to improve local stability. In this study, a newly modified soil nailing technology named as the PSN (Pretension Soil Nailing) is developed to reduce both facing displacements and ground surface settlements in top-down excavation process as well as to increase the global stability. Up to now, the PSN system has been investigated mainly focusing on an establishment of the design procedure. In the present study, laboratory model tests are carried out to investigate the failure mechanism and behavior characteristics of the PSN system. Various results of model tests are also analyzed to provide a fundamental basis for the efficient design.