• 한국안광학회지
• /
• 제3권1호
• /
• pp.223-228
• /
• 1998

$SiO_2-TiO_2-M_xO_y$ (M = Co, Cr or Cu)계의 비정질 박막을 현미경용 슬라이드 유리판 위에 전구체 용액을 스핀코팅방법으로 제조하였다. 전구체 용액은 tetraethyl orthosilicate, titanium trichloride, 그리고 코발트질산염, 크롬질산염, 구리질산염을 사용하여 합성하였다. X-선 회절분석 (${\theta}-2{\theta}$ scan)을 통하여 박막내에 $Co_3O_4$, $Cr_2O_3$, CuO 결정의 석출이 없는 비정질 박막임을 확인하였다. 코발트는 4면체배위의 $ Co^{2+}$로, 크롬은 4면체정배위의 $Cr^{6+}$로, 구리는 8면체배위의 $Cu^{2+}$로 존재하였다. 이 비정질박막의 표면에서 crack과 texture는 발견할 수 없었으며 파단면에서 박막악과 유리판 간의 계면은 균일한 조직을 보였다.

• 대한화학회지
• /
• 제56권4호
• /
• pp.448-458
• /
• 2012

In order to develop alloy resistance in aggressive sulphat ion, the corrosion behavior of metallic glasses $Ni_{92{\cdot}3}Si_{4.5}B_{32}$, $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ (at %) at different concentrations of $H_2SO_4$ solutions was examined by electrochemical methods and Scanning Electron Microscope (SEM) and X-ray Photoelectron Microscopy (XPS) analyses. The corrosion kinetics and passivation behavior was studied. A direct proportion was observed between the corrosion rate and acid concentration in the case of $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ alloys. Critical concentration was observed in the case of $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ alloy. The influence of the alloying element is reflected in the increasing resistance of the protective film. XPS analysis confirms that the protection film on the $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ alloy was NiS which is less protective than that formed on Cr containing alloys. The corrosion rate of $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$. alloys containing 7% and 13% Cr are $7.90-26.1{\times}10^{-3}$ mm/y which is lower about 43-54 times of the alloy $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ (free of Cr). The high resistance of $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ alloy at the very aggressive media may due to thicker passive film of $Cr_2O_3$ which hydrated to hydrated chromium oxyhydroxide.

• 한국환경성돌연변이발암원학회지
• /
• 제21권2호
• /
• pp.156-163
• /
• 2001

Vanadium has been known as environmental polluants resulted from the burning of fossil fuels in nature. It led to toxic responses by prooxidant activity, inducing free radicals and the accumulation in the tissues. Recently, there has been growing interest in an essential nutritional requirement of vandium and especially the treatment of diabetes. But because of its strong toxicity, thease chemicals have narrow safety margin. In order to reduce metal toxicity, and increase absorption and biological activities, metal ions such as selenium and chromium were uptaken in yeast cells. In this study, Vanadium yeast was prepared by uptaking vanadate in yeast cells. Vanadate induced hematological and biochemical changes in the experimental rat blood were inhibited by the treatments of vanadium yeast. Lipid peroxidation and catalase activity were significantly increased in kidney and liver after a single intraperitoneal injection of vanadate to rats. However, these observations were apparently reduced in the vanadium yeast treated group. Vanadium amount in blood, kidney and liver after a single intraperitoneal injection of vanadium yeast was significantly reduced than that of vanadate treated group. In conclusion, vanadium yeast uptaken vanadate in yeast cells could reduce toxic effects of vanadate.

• 한국표면공학회지
• /
• 제50권4호
• /
• pp.272-276
• /
• 2017

The response of AISI 310 type austenitic stainless steel to the novel low temperature plasma carburizing process has been investigated in this work. This grade of stainless steel shows better corrosion resistance and high temperature oxidation resistance due to its high chromium and nickel content. In this experiment, plasma carburizing was performed on AISI 310 stainless steel in a D.C. pulsed plasma ion nitriding system at different temperatures in $H_2-Ar-CH_4$ gas mixtures. The working pressure was 4 Torr (533Pa approx.) and the applied voltage was 600 V during the plasma carburizing treatment. The hardness of the samples was measured by using a Vickers micro hardness tester with the load of 100 g. The phase of carburized layer formed on the surface was confirmed by X-ray diffraction. The resultant carburized layer was found to be precipitation free and resulted in significantly improved hardness and corrosion resistance.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.175-177
• /
• 2012

A corrosion resistance and hard nitrocarburized layer was distinctly formed on 310 austenitic stainless steel substrate by DC plasma nitrocarburizing. Basically, 310L austenitic stainless steel has high chromium and nickel content which is applicable for high temperature applications. In this experiment, plasma nitrocarburizing was performed in a D.C. pulsed plasma ion nitriding system at different temperatures in $H_2-N_2-CH_4$ gas mixtures. After the experiment structural phases, micro-hardness and corrosion resistance were investigated by the optical microscopy, X-ray diffraction, scanning electron microscopy, micro-hardness testing and Potentiodynamic polarization tests. The hardness of the samples was measured by using a Vickers micro hardness tester with the load of 100 g. XRD indicated a single expanded austenite phase was formed at all treatment temperatures. Such a nitrogen and carbon supersaturated layer is precipitation free and possesses a high hardness and good corrosion resistance.

• 유기물자원화
• /
• 제12권3호
• /
• pp.134-139
• /
• 2004

피혁 제조 공정별 발생 폐수중 T-N 농도를 증가시키는 오염원이 가장 많이 배출되는 공정중 하나인 탈회공정에 적용 가능한 Non-phosgene화합물을 이용하여 Carbonate계 비질소계 탈회제의 합성 및 적용공정 연구를 통하여 배출 배액에서의 T-N, BOD, COD, SS의 측정결과 탈회후 혁에서의 Ca함량, Cr함량, TS를 측정하여 탈회효율 및 크롬 탄닝혁의 물리적 특성에 미치는 영향과 배출 배액에서의 T-N, BOD, COD, SS의 농도감소효과를 확인하여 친환경 피혁제조공정 확립을 위한 기초 연구를 진행하였다.

• Journal of Animal Science and Technology
• /
• 제63권6호
• /
• pp.1355-1361
• /
• 2021

Digestibility of pet food can affect the health of dog, especially of aged animals. To maintain the health of dogs in an overall good status it is necessary to provide nutritionally balanced food. For example, the digestibility of dogs was known to be decreased along aging. In addition, losing teethes is an often event in aged dogs that could induce a problem to eat a large size dry pet food. Nonetheless, few detailed information is available on the most suited feeding for aged dogs. As part of the nutritional study of food for aged dogs, in this study, we tested whether food type impacts on digestibility on adult versus senior dogs. The methodology to measure the digestibility of nutrients was chosen the index method using chromium oxide. Dogs were fed the same commercial dry or wet diets, which were supplemented with 0.5% chromium oxide. The wet food was prepared by adding twice volume of water in the dry food prior to incubated overnight (14-16 hours) at room temperature. After five days, their feces were collected up to a total weight of > 200 g which was the amount to analyze undigested nutrients in feces as 3 repeats. In the apparent total tract digestibility analysis of the experimental breed, no difference in the digestibility of crude protein, crude fat, crude fiber, ash, and energy was observed regarding the moisture content of the food. Noteworthy, the digestibility of nitrogen free extract was significantly increased in senior dogs fed dry dog food compared with adult dogs fed the same diet, whereas no difference was observed between senior and adult dogs fed wet food. The small breed dogs showed similar results to the experimental breed dogs. However, the digestibility of crude fat was additionally affected by age and food type unlike the experimental breed dogs. This finding suggests that the food moisture content affects the digestibility of nutrients in dogs with aging. Hence, it may be helpful to determine the nutrient contents in foods for senior dogs depending on the food type.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.211-216
• /
• 2012

염화제이철 수용액에 의한 스테인레스 강판의 식각반응에 관한 연구를 수행하였다. 식각액 교반속도, 식각온도, $Fe^{3+}$ 이온 농도, 식각액의 유리산도 및 비중 등 여러 공정변수가 식각속도에 미치는 영향에 대해 조사하였고, 그 결과, AK(aluminum-killed) 철, 크롬(chlomium) 강, 그리고 스테인레스 강(STS430J1L 합금)의 식각반응이 1차 반응식을 잘 따름을 알 수 있었다. 또한 식각액의 피로도(fatigue ratio)가 16% 이하로 유지되면 식각액 내에 슬러지가 발생하지 않으며, 식각된 강판의 표면거칠기 또한 좋아짐을 알 수 있었다. 본 연구에서 조사한 범위 내에서는, 식각액의 보메(Baume)가 증가하면 식각속도는 감소하나 유리산도가 식각속도에 미치는 영향은 미비함을 알 수 있었다. 한편 본 연구의 실험결과는 공정모델링을 통해 유도된 식각속도식의 계산결과와 잘 일치함을 알 수 있었다.

• 대한약침학회지
• /
• 제10권1호통권22호
• /
• pp.67-77
• /
• 2007

Objectives : Heavy metal contents in cultivated wild ginseng from Korea and China were evaluated for the safety purpose. Methods : Arsenic(As), cadmium(Cd), lead(Pb), mercury(Hg), copper(Cu), chromium(Cr), and selenium(Se) from the root, stem, and leaves of the Korean cultivated wild ginseng and the root of the Chinese cultivated wild ginseng were analyzed for the existence of heavy metal contents. Results : Most of heavy metals weren't detected in all the samples. Copper and lead were found in very minute volume and didn't reach the toxic concentration level of 10mg/kg. Samples used in the test were grown in non-contaminated areas, free from heavy metal contamination. Conclusions : Based on above results, cultivated wild ginseng from Korea and China are relatively safe from the heavy metal exposure. But for more rigorous quality control, an epidemiological survey using the samples from more diverse areas should be conducted.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.647-653
• /
• 2020

Stainless steel is used commonly in nuclear applications for shielding radiation, so in this study, three different types of new stainless steel samples were designed and developed. New stainless steel compound ratios were determined by using Monte Carlo Simulation program Geant 4 code. In the sample production, iron (Fe), nickel (Ni), chromium (Cr), silicium (Si), sulphur (S), carbon (C), molybdenum (Mo), manganese (Mn), wolfram (W), rhenium (Re), titanium (Ti) and vanadium (V), powder materials were used with powder metallurgy method. Total macroscopic cross sections, mean free path and transmission number were calculated for the fast neutron radiation shielding by using (Geant 4) code. In addition to neutron shielding, the gamma absorption parameters such as mass attenuation coefficients (MACs) and half value layer (HVL) were calculated using Win-XCOM software. Sulfuric acid abrasion and compressive strength tests were carried out and all samples showed good resistance to acid wear and pressure force. The neutron equivalent dose was measured using an average 4.5 MeV energy fast neutron source. Results were compared to 316LN type stainless steel, which commonly used in shielding radiation. New stainless steel samples were found to absorb neutron better than 316LN stainless steel at both low and high temperatures.