• 한국표면공학회지
• /
• 제19권2호
• /
• pp.31-43
• /
• 1986

The properties of the electroless nickel deposit mainly depends on the pH of the bath, the plating temperature, and the molar ratio of nickel to hypophosphite but they are also affected by its formulation and concentration of complexing and buffering agents. According to changeing the concentration of triethanolamine and boric acid, phosphorous contents, microsturcture, crystalline, hardness and wear resistance of deposits obtained from ammoniacal alkaline bath were investigated by EPMA, differential thermal analyser, X-ray diffractometer and wear tester. The results are as follows; (1) Increasing concentration of triethanolamine in the bath, the deposits is slightly inclined to increase its phosphorous content(3.7% P). (2) In the as-plated state, the deposits are not crystallized state but they are thermally unstable phase, and they are crystallized with precipitating $Ni_3P$ at 400$^{\circ}C$. (3) The deposit containing 2.3% P has higher hardness value in the as plated and heat treated state at below 300$^{\circ}C$ than those of 3.7% phosphorous deposit (1090Hk). But in the case of heat treating at 400$^{\circ}C$, the former has lower hardness value (1000Hk) than the latter and has remarkably Ni(III) orientation by heat treatment. (4) The 3.7% phosphorous deposit heat treated at 400$^{\circ}C$ has better wear resistance than hard chromium plating.

• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1995년도 제47차 추계 학술대회 연제집
• /
• pp.355-356
• /
• 1995

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 추계 총회 및 학술발표회
• /
• pp.8-11
• /
• 1994

Disposal of hazardous ions in the aqueous streams is a significant industrial waste problem.. Waste streams from electronics, electroplating, and photographic industries contain metal ions such as copper, nickel, zinc, chromium(IV), cadmium, aluminum, silver, and gold, amongst others in various aqueous solutions such as sulfates, chlorides, fluorocarbons, and cyanides. Typical plating solutions having similar compositions are listed in Table 1. Spent process streams in catalyst manufacturing facilities also contain precious metals such as Ag, Pt, and Pd. Developing an effective recovery process of these metal ions for reuse is important.

• Journal of Preventive Medicine and Public Health
• /
• 제28권3호
• /
• pp.678-689
• /
• 1995

Chromium is one of the representative toxic substance by occupational exposure which damage the mucosa of respiratory tract including nasal septal perforation. The aim of this study is to evaluate the effect of chromium exposure on olfactory function and to obtain the fundamental information about chromium exposure. The authors performed olfactory function test, laboratory tests and questionnaire interview on the subject of three groups, that is, two exposed groups and one nonexposed group from May 1 to June 30, 1994. Exposed group 1 was 15 male workers without nasal septal perforation, exposed group 2 was 15 male workers with nasal septal perforation among 103 workers in 22 chromium plating factories, and nonexposed group was 15 male medical students. The gathered informations were histories of chromium exposure, habits of smoking and alcohol drinking, the concentrations of chromium in serum and urine, and asparate aminotransferase(AST), alanine aminotransferase(ALT), gamma-glutamyl transferase, etc. Olfactory function was checked by T and T olfectometer using phenyl ethyl alcohol(material A), methyl cyclopentenolone(material B), iso-valeric acid(material C), $\gamma$-undecalactone(material D), skatole(material E) and the results were expressed by detection threshold(DT) and recognition threshold(RT). There was a significant difference between exposed groups and nonexposed group in A, B, C, D, E substances by DT and in A, B, C, D substances by RT(P<0.01). The degree of olfactory dysfunction was highest in the exposed group 2 and lowest in the nonexposed group in all five substances by DT and it was same in A B, D substances RT and the difference of RT and DT. As summary, olfactory dysfunction by chromium exposure was recognized and the degree of olfactory dysfunction was higher in the exposed group with nasal septal perforation. Therefore, it would be helpful to apply olfactory function test for the early detection of olfactory dysfunction, and this test would be considered as the basic tool within workers' compensation system.

• Journal of Preventive Medicine and Public Health
• /
• 제10권1호
• /
• pp.16-24
• /
• 1977

${\ulcorner}$크롬${\lrcorner}$과 ${\ulcorner}$니켈${\lrcorner}$등의 도금(鍍金)을 하는 도금공(鍍金工)에 대하여 그 직업성질환(職業性疾患)을 관찰(觀察)하고 저 1976년(年) 6(월)月 대구시내(大邱市內) 소재(所在)하는 서로 유사한 종류와 방법으로 작업하고 있는 중소기업체(中小企業體) 중 작업환경개선(作業環境改善)이 어느 정도 되어 있는 곳과 전연 되어있지 않는 곳을 각각 1개소(個所)씩 선택(選擇)하며 비교해 본 결과 다음과 같이 요약(要約)할 수 있었다. 전반적(全般的)으로 비강내(鼻腔內) 증상(症狀)이 총출현빈도(總出現頻度) 중 50%이상을 점하며 다음 현기증(眩氣症)이 문제(文題)로 되어 있으며 환경개선(環境改善)을 함에 따라 비강내증세(鼻腔內症勢)중에서 괴양성 병변(病變)을 줄이어 증상(症狀)은 가볍게 되었으나 개입보호구사용(個入保護具使用)을 소홀히 함으로써 점차 만성적인 변화(變化)를 초래할 염려가 있었다. 각종 혈액상(血液相)중 ${\ulcorner}$헤모글로번${\lrcorner}$, ${\ulcorner}$헤마토크리트${\lrcorner}$ 적혈구(赤血球)와 요소견(尿所見)중 단백질당(蛋白質糖), ${\ulcorner}$우로비리노겐${\lrcorner}$등에는 큰 영향을 미치지 않고 있다고 생각된다.

• 공업화학
• /
• 제18권3호
• /
• pp.296-302
• /
• 2007

6가 크롬의 크로메이트 코팅제의 대체를 위한 3가 크롬의 크로메이트 코팅용액의 제조에 관한 것이다. 본 연구에서 제안된 코팅제는 3가 크롬원으로서 $KCr(SO_4)_2$를 35~45 g/L, 인산계 화합물로서 $NaH_2PO_4$를 20~30 g/L을 주성분으로 하고 여기에 금속계 황산화물로서 $CoSO_4$ 10~20 g/L, $ZnSO_4$ 10~20 g/L의 조성으로 구성된 것이다. 이 제안된 3가 크롬 코팅용액을 사용하여 pH 2.0~2.2, 상온에서 담지시간 20~25 s의 조건하에 시안아연도금체에 코팅된 피막은 염수분무시험결과 5% 백청발생까지 120 h 이상 견디는 우수한 내식성을 발현하였다.

• 한국산업보건학회지
• /
• 제11권1호
• /
• pp.48-55
• /
• 2001

The purpose of this study was to evaluate the analytical accuracy and precision of microwave oven digestion/atomi absorption spectrophotometry (AAS) for analyzing airborne chromium collected on mixed cellulose ester membrane (M filter from the work environment, and to compare the accuracy and the precision with those of the National Institute for Occupational Safety and Health (NIOSH) Method #7024 hot plate digestion/AAS method. For this study, field air sample pairs were collected from a electroplating process, and spiked samples in a laboratory were prepared and using these samples. Two digestion methods were comp; and evaluated in terms of recovery rate and bias as indices of accuracy and coefficient of variation as a index of precision. The results and conclusions are as follows. In spiked samples, the accuracies (% mean recoveries) of hot plate/AAS and microwave oven/AAS method were 97.19%, 97.1%, respectively, and the precisions (pooled respectively, and the precisions (pooled coefficient of variance, $CV_{pooled}$) 6.93% and 3.88%, respectively. The biases of hot plate ani microwave oven methods were 4.56 - 14.7% and 2.22 - 7.42% respectively. There was no statistically significant difference between hot plate and microwave oven methods recovery rates of spiked samples (p>0,05). Also, no statistically significant difference was shown among the concentrations of air samples determined by two method (p>0.05). In conclusion, microwave oven/AAS method h excellent accuracy and precision, and advantages such as time-saving and simple procedure in comparison with the classical NIOSH method. Therefore, this method can be use widely to analyze airborne chromium collected on MCE filter from the work environments.

• 한국환경보건학회지
• /
• 제28권2호
• /
• pp.109-116
• /
• 2002

The purpose of this study was to evaluate a new sampling and analytical method for the determination of airborne hexavalent chromium, Cr(Ⅵ), in a field plating operation. The procedures of this new method (Shin & Paik's Method) are as the following: Airborne hexavalent chromium is collected on polyvinyl chloride (PVC) filter according to the National Institute iota Occupational Safety and Health (NIOSH) Method 7600, and the filler sample is placed in a screw-capped vial and soaked with 2% NaOH/3% Na₂CO₃ solution immediately after sampling. The Cr(Ⅵ) sample is analyzed by ion chromatography/visible spectrophotometry (IC/VS) according to the U.S. Environmental Protection Agency (EPA) Method 218.6. The airborne Cr(Ⅵ) concentrations measured by this method were compared with those determined by three reference methods: One (NIOSH/EPA Method) consisted of sampling airborne Cr(Ⅵ) on PVC filters and storing the sample filters in strew-capped vials according to the NIOSH method, and analyzing Cr(Ⅵ) in samples using IC/VS according to the EPA method. The second method (Impinger Method/NaHCO₃) consisted of absorbing airborne Cr(Ⅵ) into 0.02 M NaHCO₃ solution in midget impinger, and analyzing the Cr(Ⅵ) in samples using IC/VS. The third method was the OSHA Method ID-215. Using these four different methods, lour replicates of air samples were collected at an electroplating process and analyzed simultaneously. Two-way ANOVA and paired t-test were used to test difference among values determined by the methods. There was no significant difference and a strong correlation (r²:0.99) between Cr(Ⅵ) concentrations measured by the Shin & Paik's Method and an impinger method (p>0.05). However, Cr(Ⅵ) concentrations determined by Shin & Paik's Method were significant1y different from those by the NIOSH/EPA Method (p<0.05) or the OSHA method (p<0.05). The Cr(Ⅵ) concentrations of Shin & Paik's Method were significantly higher than those of the NIOSH/EPA Method or the OSHA method. This result indicated that the Shin & Paik's Method may prevent Cr(Ⅵ) losses caused by reduction and give more reliable results of airborne Cr(Ⅵ) concentrations in work environments.

• 마이크로전자및패키징학회지
• /
• 제23권4호
• /
• pp.79-85
• /
• 2016

It is imperative to find environment-friendly coatings as an alternative to the currently used hexavalent chromate conversion coatings for the purpose of improving the anti-corrosion properties of aluminum alloys. Hence, in this study, the corrosion properties of a trivalent chromate conversion coating solution are analyzed and measured. Because of the presence of multiple components in trivalent chromate conversion coating solutions, it is difficult to control plating, attributed to their mutual organic relationship. It is of significance to determine the concentrations of the components present in these coatings; hence, qualitative and quantitative analysis is required. The coating solution contained not only an environment-friendly component chromium(III), but also zirconium, fluorine, sulfur, and potassium, in the coating film. These metals are confirmed to produce a film with improved corrosion resistance to form a thin layer. The excellent corrosion resistance for the trivalent chromate solution is attributed to various inorganic and organic additives.

• 한국표면공학회지
• /
• 제10권3호
• /
• pp.3-11
• /
• 1977

3가크롬 鍍金法은 6가크롬 鍍金法의 諸 欠点을 克服할 수 있다는 事실이 알려져 外國에서는 오래 前 부터 工業的 실用化를 위한 硏究가 活潑하게 行하여 졌고, 이중 최근에 發表된 Alecra 3 process는 電着諸特性이 뛰어난 方法으로 裝飾크롬 鍍金 分野에 利用되고 있다고 한다. 本 硏究는 Alecra 3 process의 浴 組成中 개미산칼륨으로, 염화칼륨을 염화나트륨으로 大替한 浴의 電着諸特性을 調査하고 最適 염化크롬의 濃度와 錯化比를 함께 調査하여 다음과 간은 結果를 얻었다. (1) 外觀, 被覆性,均一電着性 및 平均 電析 速度 등은 염화크롬 濃度가 0.4 mol일때 가장 良好하였다. (2) 개미산나트륨 대 염화크롬의 mol比는 염화크롬이 0.4 mol일때 2~3이 比較的 良好한 電着諸特性을 보여 주었다. (3) 개미산나트륨 및 염화나트륨 含有한 鍍金浴의 電着諸特性은 Alecra 3 Process의 特性과 비슷하였다.