• 한국재료학회지
• /
• 제12권11호
• /
• pp.845-849
• /
• 2002

Alloys of $Fe_3$Al, $Fe_3$Al-6Cr, $Fe_3$Al-4Cr-1Mo, $Ni_3$Al, and $Ni_3$Al-2.8Cr were oxidized at $1000^{\circ}C$ in air, and the oxide scales formed were studied using XRD. SEM, EPMA, and TEM. The oxide scales that formed on $Fe_3$Al-based alloys consisted primarily of $\alpha$-$Al_2$$O_3$ containing a small amount of dissolved Fe and Cr ions, whereas those that formed on $Ni_3$Al-based alloys consisted primarily of $\alpha$-$Al_2$$O_3$, together with a small amount of $NiAl_2$$O_4$, NiO and dissolved Cr ions. For the entire alloys tested, nonadherent oxide scales formed, and voids were inevitably existed at the scale-matrix interface.

• 한국재료학회지
• /
• 제17권6호
• /
• pp.308-312
• /
• 2007

Chromium oxide thin films have been deposited on silicon substrates using a tabletop 9kJ mathertyped plasma focus (PF) device. Before deposition, pinch behavior with gas pressure was observed. Strength of pinches was increased with increasing working pressure. Deposition was performed at room temperature as a function of working pressure between 50 and 1000 mTorr. Composition and surface morphology of the films were analyzed by Auger Electron Spectroscopy and Scanning Electron Microscope, respectively. Growth rates of the films were decreased with pressure. The oxide films were polycrystalline containing some impurities, Cu, Fe, C and revealed finer grain structure at lower pressure.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.815-820
• /
• 2011

Three kinds of organometallic compounds (chromium acetylacetonate, magnesium acetate and vanadyl acetylacetonate) were used as transition metal precursor, titanium n-butoxide and multi-walled carbon nanotube as titanium and carbon precursor to prepare metal oxide-CNT/$TiO^2$ composites. The surface properties and morphology of metal oxide-CNT/$TiO^2$ composites were by Brauer-Emett-Teller (BET) surface area measurement, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive X-ray (EDX) analysis. The photocatalytic activity of prepared metal oxide-CNT/$TiO^2$ composites was determined by the degradation effect of methylene blue in an aqueous solution under irradiation of visible light.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.346-347
• /
• 2005

• 소성∙가공
• /
• 제8권3호
• /
• pp.319-319
• /
• 1999

From isothermal and cyclic oxidation tests on thermomechanically treated Ti-5%Al, Ti47%Al-4%Cr, and Ti-48%Al-2%Cr-2%Nb alloys at 800, 900, 1000℃ in air, it was found that Ti-48%Al-2%Cr-2%Nb and Ti-47%Al-4%Cr had the best and the worst oxidation resistance, respectively. The oxide scales consisted primarily of TiO₂and Al₂O₃, with and without a small amount of dissolved Cr and 7b ions, depending on the alloy composition. These ions were slightly enriched inside the inner oxide layer, and strongly enriched around the scale-matrix interface. The outer TiO₂-rich layer was formed by the outward diffusion of Ti ions, while the inner (TiO₂+A1₂O₃,) mixed layer was formed by the inward transport of oxygen. The outward movement of Al ions farmed the intermediate Al₂O₃-rich Iayer, above talc prepared alloys.

• 소성∙가공
• /
• 제8권3호
• /
• pp.327-327
• /
• 1999

The oxidation behavior of 60%Cu-40%Zn brass haying small amounts of Zr, Cr, Mg, Al, and Si was studied between 873 and 1043 K in air. The alloying element of Mg was harmful, while other alloying elements were beneficial to oxidation resistance. Particularly, the simultaneous addition of Al and Si decreased the oxidation rate drastically. During oxidation, Zr formed ZrO₂, Cr formed CuCr₂O₄, Mg formed MgO, Al formed A1₂CuO₄, and Si formed amorphous SiO₂. These oxides were incorporated in the oxide scale composed predominantly of ZnO. The oxide scales formed on all the tested alloyswere prone to cracking, wrinkling, and spallation.

• 공업화학
• /
• 제10권1호
• /
• pp.85-92
• /
• 1999

고정층 촉매 반응기를 이용하여 ${\gamma}$-알루미나에 담지한 크롬산화물 촉매상에서 vinyl chloride의 완전산화잔응을 $240{\sim}300^{\circ}C$의 온도와 600~3,500 ppm의 농도범위에서 조사하였다. 반응은 vinyl chloride의 농도에 대하여 비선형적으로 변하였으며, 산소의 농도에 대하여는 0차 거동을 보였다. 또한 반응 생성물인 $H_2O$와 HCl를 반응물에 첨가하였을 때 vinyl chloride의 전환율에 영향이 거의 없었다. Vinyl chloride의 산화반응에 대한 몇 가지 반응모델을 가정하고 실험결과와 상관시켜 가장 잘 일치하는 모델을 도출하였다. 속도식의 해석결과 vinyl chloride의 산화반응은 산소로 피복된 촉매표면에 vinyl chloride가 흡착한 후 산화분해되며, vinyl chloride가 촉매표면에 흡착하여 반응을 방해한다는 가정하에서 도출된 반응속도 모델이 실험결과를 가장 잘 표현하였다. 실험치와 예측치간의 표준편차 백분율은 약 5.2% 정도였으며 활성화에너지는 18.9 kcal/mol으로 계산되었다.

• 동력기계공학회지
• /
• 제13권3호
• /
• pp.33-39
• /
• 2009

The aim of this study is to analyze the welds characteristics of the 205 stainless steel pipe for application of street pole material. The welds corrosion behavior of STS 205 pipe in 0.1 N sulphuric acid solution and 5% NaCl solution at room temperature was studied using both salt spray test and potentiodynamic polarization experiment. The morphology and components of corrosion products on surface of STS 205 pipe welds were investigated using SEM/EDX. The tensile strength and yield strength values of STS 205 plate were 715 MPa and 369 MPa respectively. The microvickers hardness values of STS 205 pipe welds were slightly increased than that of STS 304 pipe welds. Corrosion current density($I_{corr.}$) and critical current density($I_{crit.}$) values of STS 205 pipe welds in 3.5% NaCl solution were $1.89{\times}10^{-6}$ $A/cm^2$ and $15.8{\times}10 ^{-6}$ $A/cm^2$. The corrosion resistance of SIS 205 pipe welds was similar to its STS 304 pipe welds. The STS 205 and 304 pipe welds passive films were chromium oxide. Especially, the STS 205 pipe welds showed good corrosion resistance in 0.1 N sulphuric acid. This is attributed to the forming of protective chromium oxide on the surface of STS 205 pipe welds.

• 공업화학
• /
• 제3권4호
• /
• pp.663-669
• /
• 1992

분말의 $Zr(OH)_4$를 $(NH_4)_2CrO_4$수용액에 함침시킨 후 공기중에 소성하여 질코니아에 담지된 산화크롬 촉매를 제조하였다. 제조된 $CrO_x/ZrO_2$ 촉매상에 cumene을 반응시켜 산화-환원 거동을 연구한 결과 크롬의 산화상태가 +6인 chromate형태로 질코니아 표면에 존재할 때는 강한 산점이 생성되어 cumene의 탈알킬화 반응에 촉매활성을 나타내었다. 그러나 많은 양의 $Cr^{6+}$종은 반응중에 탈수소로 생성된 $H_2$에 의하여 환원되어 $Cr^{3+}$종으로 변환되었으며 $Cr^{3+}$종은 cumene을 탈수소화시켜 ${\alpha}$-methyl styrene을 생성하는 반응에 활성점으로 작용하였다. 환원된 $Cr^{3+}$종은 $O_2$로 처리하면 다시 $Cr^{6+}$종으로 되고 따라서 산화된 촉매는 cumene의 탈알킬화 반응에 활성을 나타내었다.

• 한국자기학회지
• /
• 제18권3호
• /
• pp.89-93
• /
• 2008

준강자성체 구리-철-크롬 산화물 $CuFe_{0.9}Cr_{1.1}O_4$을 제조하여 액체질소 온도에서부터 닐 온도까지의 범위에 대한 뫼스바우어 분광실험을 하였다. 닐 온도는 355 K로 측정되었으며, 닐 온도 이상에서의 전기사중극자 상호작용의 크기인 사중극자 분열값은 0.50 mm/s인 반면, 닐 온도 이하에서의 사중극자 이동값은 실험오차 범위 내에서 0.00 mm/s이었다. 이러한 전기사중극자 상호작용에 대한 겉보기 불일치 현상은 자기적 초미세 자기장이 전기장 기울기 텐서의 주축에 대하여 무작위로 배열된다는 모델을 이용하면 설명될 수 있다.