• 대한치과보철학회지
• /
• 제40권6호
• /
• pp.590-596
• /
• 2002

The resin : metal interface is at the basis of most bonding failures in resin-bonded prosthesis. Although debonding has been a problem with adhesive fixed partial dentures, various dentists classify them as long-term restorations. The advantages of resin-bonded fixed partial dentures include minimal tooth reduction and the possibility of rebonding. if resin-bonded protheses can be easily rebounded, it is of clinical importance to know if the lutingagents rebond as well the second time as they did originally. Several retentive systems for resin-to-metal bonding have recommended. Treatments such as electrolytic etching and silicone coating, despite the good result of bond strength, have proved to be time-consuming and technique-sensitive. Therefore a simple and more reliable method is desirable. This study evaluated the effect of metal surface treatments on the rebond strength of panavia 21 cement to a nickel-chromium(Ni-Cr) alloy. The samples were received the following surface treatments : Group No.1 (control or served as the control) treatment with sandblasting with 50um aluminum oxide and ultrasonically cleaned for 10minutes in double-deionized water, Group No.2 were no surface treatments. Group No.3 were treated with metal primer. Group No.4 were treated with sandblasting as previously described, and then metal priming. From the analysis of the results, the following conclusions were drawn. 1. Sandblasting and metal priming appears to be an effective method for treatment of metal after accidental debonding. 2. Group without surface treatment had significantly lower bond strengths compared with other groups. 3. The combination of sandblasting and metal priming may not develop superior bonding strengths compared with other techniques that used the Ni-Cr alloys. 4. Combination of cohesive and adhesive failures were the most common type observed. The results support the use of sandblasting as a viable procedure when rebonding accidentally lost adhesive partial denture. We concluded that sandblasting and metal priming of metal surface before bonding could provide the adequate bond strength during rebonding of resin-bonded fixed partial denture.

• 농업과학연구
• /
• 제47권2호
• /
• pp.229-237
• /
• 2020

This study assessed the effects of a dietary non-genetically modified organism (non-GMO) source on growth performance and nutrient digestibility of grower-finisher pigs. The dietary treatments were 1) rice-soybean meal-based control diet and 2) rice and non-GMO soybean meal-based diet. In the experiment 1, 60 growing pigs (initial body weight [BW] = 23.76 ± 3.42 kg) were randomly assigned to 1 of 2 dietary treatments with 6 pigs·pen^-1 (5 replications) for 6 weeks. In experiment 2, 48 finishing pigs (initial BW = 64.31 ± 6.17 kg) were randomly assigned to 1 of 2 treatment groups with 4 pigs·pen^-1 (6 replications) for 6 weeks. Measurements were the average daily gain (ADG), average daily feed intake (ADFI), gain-to-feed ratio (G : F), and nutrient digestibility. The growth performance was measured at the beginning and end of each period. The apparent total tract digestibility (ATTD) was determined by chromium oxide as an indigestible marker during the last 7 days of each experiment. During the grower period, pigs fed the diet containing the non-GMO soybean meal had a higher (p < 0.05) ADFI than those fed the control diet; however, there were no differences between the dietary treatments in the ADG, G : F, and ATTD. Moreover, the dietary treatments did not affect the ATTD and growth performance of the finishing pigs. In conclusion, the inclusion of non-GMO soybean meal in the diet had no negative effects on the growth rate and nutrient digestibility, indicating that non-GMO soybean meal can be used in diet formulations with other feed ingredients and be a substitute for conventional soybean meal.

• 농업과학연구
• /
• 제47권2호
• /
• pp.275-282
• /
• 2020

Two experiments were conducted to examine the effects of the difference in energy concentration in diets on performance and nutrient digestibility of growing-finishing pigs. The experimental diets were as follows: 1) a normal energy level corn-soybean meal-based diet (CON) and 2) high-energy diet compared with the CON (HE). Pigs had free access to their feed and water ad labium for 6 weeks during each experimental period. In experiment 1, 60 growing pigs (initial body weight [BW] of 23.85 kg) were randomly allotted to 2 treatment groups with 5 replications (6 pigs·pen^-1). In experiment 2, 48 finishing pigs (initial BW = 65.13 kg) were randomly assigned to 2 treatment groups with 6 replications (4 pigs·pen^-1). The growth performance was measured at the beginning and end of each period. The apparent total tract digestibility (ATTD) was determined by chromium oxide as an indigestible marker during the last 7 days of each experiment. In experiment 1, the dietary treatments did not affect the growth performance and ATTD of energy and nutrients. In experiment 2, no differences in growth performance were observed for pigs fed CON and HE throughout the experimental period. Additionally, dietary treatments did not affect the ATTD. In conclusion, the high energy content in diets for the growing-finishing period had no effect on the growth performance or digestibility, indicating that a wide range of energy content changes in diets would be required to affect the performance and digestibility of grower-finisher pigs. It is also necessary to understand the characteristics of components used to adjust the dietary energy concentration.

• 대한치과교정학회지
• /
• 제51권4호
• /
• pp.270-281
• /
• 2021

Objective: The aim of this in vitro study was to evaluate the changes in friction between orthodontic brackets and archwires coated with aluminum oxide (Al₂O₃), titanium nitride (TiN), or chromium nitride (CrN). In addition, the resistance of the coatings to intraoral conditions was evaluated. Methods: Stainless steel canine brackets, 0.016-inch round nickel-titanium archwires, and 0.019 × 0.025-inch stainless steel archwires were coated with Al₂O₃, TiN, and CrN using radio frequency magnetron sputtering. The coated materials were examined using scanning electron microscopy, an X-ray diffractometer, atomic force microscopy, and surface profilometry. In addition, the samples were subjected to thermal cycling and in vitro brushing tests, and the effects of the simulated intraoral conditions on the coating structure were evaluated. Results: Coating of the metal bracket as well as nickel-titanium archwire with Al₂O₃ reduced the coefficients of friction (CoFs) for the bracket-archwire combination (p < 0.01). When the bracket and stainless steel archwire were coated with Al₂O₃ and TiN, the CoFs were significantly lower (0.207 and 0.372, respectively) than that recorded when this bracket-archwire combination was left uncoated (0.552; p < 0.01). The friction, thermal, and brushing tests did not deteriorate the overall quality of the Al₂O₃ coatings; however, some small areas of peeling were evident for the TiN coatings, whereas comparatively larger areas of peeling were observed for the CrN coatings. Conclusions: Our findings suggest that the CoFs for metal bracket-archwire combinations used in orthodontic treatment can be decreased by coating with Al₂O₃ and TiN thin films.

• 한국분말재료학회지
• /
• 제29권5호
• /
• pp.399-410
• /
• 2022

Changes in the mechanical properties and microstructure of an IN 939 W alloy according to the sintering heating rate were evaluated. IN 939 W alloy samples were fabricated by spark plasma sintering. The phase fraction, number density, and mean radius of the IN 939 W alloy were calculated using a thermodynamic calculation. A universal testing machine and micro-Vickers hardness tester were employed to confirm the mechanical properties of the IN 939 W alloy. X-ray diffraction, optical microscopy, field-emission scanning electron microscopy, Cs-corrected-field emission transmission electron microscopy, and energy dispersive X-ray spectrometry were used to evaluate the microstructure of the alloy. The rapid sintering heating rate resulted in a slightly dispersed γ' phase and chromium oxide. It also suppressed the precipitation of the η phase. These helped to reinforce the mechanical properties.

• 한국진공학회지
• /
• 제15권5호
• /
• pp.534-540
• /
• 2006

$V_2O_3$, $VO_2$, $V_2O_5$ 박막들이 하나의 선구 용액으로부터 다양한 후열처리 조건을 통하여 제작될 수 있었다. 진공 중 후열처리 시 rhombohedral 구조의 $V_2O_3$ 박막이 형성되어졌고, 공기 중 후열처리 시 orthorhombic 구조의 $V_2O_5$ 박막을 얻을 수 있었다. Monoclinic 구조의 $VO_2$ 박막은 진공 후열처리 중 $O_2$ 가스를 공급함으로써 제작될 수 있었다. $V_2O_3$ 박막이 상온에서 도체적 특성을 보이는 반면, $V_2O_5$, $VO_2$ 박막은 반도체적 성질을 지니고 있음을 전기적, 광학적 특성 조사를 통하여 알 수 있었다. 크롬(Cr)이 도핑됨에 따라 $VO_2$ 박막은 그 전기전도성이 n-type에서 p-type으로 변화하였고 비저항이 감소되는 결과를 나타내었다. 또한, 크롬 도핑된 $VO_2$ 박막은 orthorhombic 구조를 나타내었다. 이와 같은 바나듐 옥사이드 박막들에서 관측된 광학적 흡수 구조들은 O 2p 에서 V 3d 밴드로의 전이에 의한 것으로 해석되어진다. 바나듐 이온의 $t_{2g}$ 상태와 $e_g$ 상태 사이의 결정장 갈라짐(crystal-field splitting)은 $V_2O_5$와 $VO_2$에 대해서 각각 1.5 및 1.0 eV로 해석된다.

• 대한치과기공학회지
• /
• 제33권1호
• /
• pp.37-45
• /
• 2011

Purpose: Heat pressed ceramics, used for all ceramic restorations, have the additional advantage of being technically less change through using of the lost-wax technique. Conceptually, combining the ceramic with the clinically proven reinforcing ability of a metal framework would be advantageous; however, cause of mismatching of fusion between ceramics and metal frameworks which from differences of casting temperature and coefficient of thermal expansion, pressed ceramics could not be used with a metal framework. The purpose of this study was to compare shear bond strength of press-to metal ceramic to porcelain fused non precious metal and feldspatic porcelain fused non precious metal. Methods: The 30 metal specimens were casted in a porcelain fused non precious metal nickel-chromium alloy. They were divided into 3 groups by surface treatment and applied ceramic: $125{\mu}m$ aluminium oxide sandblasting and veneered feldspatic porcelain (group FP), $125{\mu}m$ aluminium oxide sandblasting and had press-to-metal ceramic applied (group PC), porcelain bonder (gold bonder) fused on surface of metal specimens and had press-to-metal ceramic applied (group PCG). In each group 10 metal specimens were used. The press-to-metal ceramic applied 20 specimens had ash-free wax pattern applied, the metal-wax complexes invested, and were pressed with heat press ceramic. All specimens were subjected to shear bond strength test at a crosshead speed of 1.0 mm/min. Results: The results of measured in Mean SD and data were analyzed by one-way AVOVA (p= .05) and Tukey HSD test (p= .05).: group FP $16.090{\pm}1.841$ MPa, group PC $12.620{\pm}1.8256$ MPa, group PCG $10.920{\pm}0.9283$, significant differences between all groups (p < .05). Significant differences were found in each between group FP and group PC, group FP and group PCG (p < .05). Conclusion: The shear bond strength of press-to-metal ceramic to porcelain fused non precious metal was described higher in unused gold bonder group than used gold bonder groups.

• 한국산업보건학회지
• /
• 제32권4호
• /
• pp.302-324
• /
• 2022

Objectives: The objective of this study is to investigate exposure to occupational carcinogens in the nationwide electronics industries and to establish a strategy for control of occupational carcinogens in South Korea. Methods: We evaluated occupational carcinogens as defined by International Agency for Research on Cancer (IARC) using a nationwide work environment measurement database on the electronics industry in South Korea measured between 2013 and 2017 in accordance with the Occupational Safety and Health Act. Results: The number of occupational carcinogens found in the electronics industry in South Korea were: 20 for IARC Group 1, 14 for Group 2A, and 30 for Group 2B. The occupational carcinogens (Group 1) most frequently exposed were strong-inorganic-acid mists containing sulfuric acid (sulfuric acid), welding fumes, mineral oils (untreated or mildly treated), nickel compounds, silica dust, crystalline substances in the form of quartz or cristobalite, formaldehyde, arsenic and inorganic arsenic compounds, chromium (VI) compounds, trichloroethylene, cadmium and cadmium compounds, vinyl chloride, ethylene oxide, wood dust, beryllium and beryllium compounds, 1,3 butadiene, benzene, and others. Among them, the carcinogens (Group 1) exceeding the acceptable standard were trichloroethylene, formaldehyde, and ethylene oxide. The working environment measurement system as regulated by Occupational Safety and Health Act is not properly assessed and managed for occupational carcinogens in South Korea. A component analysis for all materials used should be set up to practically reduce occupational carcinogens. A ban on the use of occupational carcinogens and the development of alternative materials are needed. The occupational carcinogens below the acceptable standards should be carefully examined and a new standard for exposure needs to be established. Conclusions: The Occupational Safety and Health Act should be improved to identify and monitor occupational carcinogens at work sites. A strategy for occupational safety and health systems should be provided to give direction to workers' needs and right to know.

• 대한치과보철학회지
• /
• 제57권2호
• /
• pp.95-101
• /
• 2019

목적: 레진 시멘트와 코발트 크롬 합금 간의 미세인장결합강도에 다양한 프라이머들이 미치는 영향을 평가하기 위한 것이다. 재료 및 방법: 본 실험에서는 4개의 프라이머(Universal primer, Metal primer II, Alloy primer, and Metal/Zirconia primer)와 2개의 레진 시멘트(Panavia F2.0, G-CEM LinkAce)를 사용하였고, 길이 6 mm, 폭 1 mm, 두께 1 mm의 150개의 코발트 크롬 빔들이 캐스팅 과정을 통해 제작되었다. 150개의 코발트 크롬 빔들을 프라이머와 레진 시멘트의 종류에 따라 프라이머 처리를 하지 않은 대조군을 포함하여 10개 그룹으로 나누었다. 금속과 레진시멘트를 산화알루미늄($125{\mu}m$ 크기)으로 샌드블라스팅 처리한 후 실리콘 틀을 이용하여 접착시켰다. 실험 전에, 입체현미경(stereomicroscope)을 이용하여 모든 금속-레진 빔들을 검사하였고, 미세인장결합강도 실험을 시행하였다. 통계적인 평가에는 one-way ANOVA와 Tukey's test를 사용하였다. 결과: 모든 그룹들의 평균 미세인장결합강도는 20 - 28 MPa이었으며, 그룹 간에 통계적으로 유의한 차이는 없었다. Panavia F2.0과 G-CEM LinkAce 그룹 모두에서 접착 파절과 응집 파절이 동시에 나타나는 혼합 파절이 가장 흔하게 일어난 파절 양태였다. 결론: 모든 실험군들의 미세인장결합강도는 상대적으로 높았지만, 본 실험에서는 프라이머의 사용이 Panavia F2.0 및 G-CEM LinkAce 레진시멘트와 코발트 크롬 합금 사이의 미세인장결합강도를 증가시키지 않았다.

• 박물관보존과학
• /
• 제29권
• /
• pp.133-152
• /
• 2023

야외에 위치한 대형 군사문화유산의 장기적 보존을 위해 선행연구를 참고하여 과거에 이루어진 도료를 통한 도장 기술의 역사를 살펴보았으며, 전쟁기념관 소장 H-13 헬기의 분석 결과와 비교하였다. 선행연구에서 제2차 세계대전에 참여하여 지상에서 발굴된 난파기 3점에서 샘플을 수집해 분석한 결과, 항공기의 각 샘플에서 크롬의 다양한 화학적인 상태의 특성이 보호 코팅에 대한 역할 수행을 확인할 수 있었다. 약 80년이 지나 도료층의 변질과 자연환경에 장기간 노출되었는데도, 이 화합물은 1940년도 초에 부식 억제 안료로서 테스트 되었으며, 수분에 저항력을 갖는 훌륭한 억제력을 제공했다. 이런 이유로 항공 산업에서 알루미늄 합금의 부식 억제제로 널리 사용되었다. 즉 부식을 방지하기 위해 가장 널리 사용되는 재료는 크롬산염을 함유한 유기 프라이머였다. 본 연구에서 6·25전쟁에 운용되었던 H-13 헬기의 도료분석을 토대로 두 번째 층인 프라이머가 산화크롬(Cr₂O₃)을 포함하고 있음을 보여준다. 또한 적색의 사산화삼납(Pb₃O₄)을 전색제에 녹여 사용한 것으로 추정된다. 이를 선행연구와 비교한 결과 크롬산염이 제공하는 부식 방지 기능이 여전히 유효한지 여부를 명확히하는 데 도움이 될 수 있다. 적외선 분광분석 결과는 알키드 수지(Alkyd Resin)의 도료가 사용되었다. 향후 보다 다양한 유물과의 비교를 통해 합금을 부식으로부터 보호하기 위한 도료의 제작 기술 변화를 해석할 수 있을 것으로 기대된다.