• Korean Journal of Materials Research
• /
• v.12 no.2
• /
• pp.121-128
• /
• 2002

Anodic alumina layer can be used as templates for preparation of nano-structured materials, because porous oxide layer on aluminum shows a uniform pore size and a high pore density. In order to find out possibility for template material to prepare nano wire, the effects of the anodic applied potential, anodic time and the temperature of electrolyte on pore diameter of anodic alumina layer were studied using SEM and AFM. The pore diameter of anodic alumina layer increased with applied anodic potential and electrolytic temperature. Especially, the pore diameter of anodic oxide layers formed in chromic acid can be well replicated by widening process in $H_3$$PO_4$solution.

• Journal of Powder Materials
• /
• v.5 no.3
• /
• pp.199-209
• /
• 1998

A new low melting inorganic binder, monoclinic $HBO_2$, has been developed for Selective Laser Sintering (SLS) of alumina powder by dehydration process of boron oxide powder in a vacuum oven at $120^{\circ}C$. It led to better green SLS parts and higher bend strength far green and fired parts compared to other inorganic binders such as aluminum and ammmonium phosphate. This appeared to be due to its low viscosity and better wettability of the alumina particle surface. A low density single phase ceramic, aluminum borate ($Al_{18}B_4O_{33}$), and multiphase ceramic composites, $A_{12}O_3-A_{14}B_2O_9$, were successfully developed by laser processing of alumina-monoclinic $HBO_2$ powder blends followed by post-thermal processing; both $Al_{18}B_4O_{33}$ and $A_{14}B_2O_9$ have whisker-like grains. The physical and mechanical properties of these SLS-processed ceramic parts were correlated to the materials and processing parameters. Further densification of the $A_{12}O_3-A_{14}B_2O_9$ ceramic composites was carried out by infiltration of colloidal silica, and chromic acid into these porous SLS parts followed by heat-treatment at high temperature ($1600^{\circ}C$). The densities obtained after infiltration and subsequent firing were between 75 and 80% of the theoretical densities. The bend strengths are between 15 and 33 MPa.

• Korean Journal of Poultry Science
• /
• v.47 no.3
• /
• pp.135-142
• /
• 2020

The objective of this experiment was to determine the apparent (AID) and standardized ileal digestibility (SID) of crude protein (CP) and amino acids (AA) in five feed ingredients for male broiler chickens (Ross 308). The test feed ingredients consisted of corn, wheat, soybean meal (SBM), canola meal (CM), and corn distillers dried grains with solubles (DDGS). The birds were fed a standard starter diet for the first 19 d. On day 19, nine hundred sixty birds were assigned to six dietary treatments with eight replicate cages (20 birds/cage) in a randomized complete block design. All experimental diets contained chromic oxide (0.5% in the diet) as an indigestible index. The diets were offered ad libitum for 4 d. At the end of the experiment, all birds were euthanized and ileal digesta samples were collected immediately. The indispensable AA with the least AID and SID were Thr for all the ingredients used in the present study, except for DDGS, in which Lys had the lowest digestibility. For indispensable AA, the AID and SID of Leu, Phe, Arg, and Met were the greatest in corn, DDGS, wheat, SBM, and CM, respectively. The results from the present study showed that there are variations in both the AID and SID of CP and AA among feed ingredients.

• Carbon letters
• /
• v.3 no.3
• /
• pp.127-132
• /
• 2002

Unidirectional polymer composites were prepared using high-strength carbon fibers as reinforcement and phenolic resin as matrix precursor with keeping fiber volume fraction at 30, 40, 50 and 60% respectively. These composites were carbonized at $1000^{\circ}C$ and graphitised at $2600^{\circ}C$ in the inert atmosphere. The carbonized and graphitised composites were characterized for mechanical properties as well as microstructure. Microscopic studies were carried out of the polished surface of carbonized and graphitised composites after etching by chromic acid, to understand the effect of fiber volume fraction on oxidation at fiber-matrix interface. It is found that the flexural strength in polymer composites increases with fiber volume fraction and so does for the carbonised composites. However, the trend was found to be reversed in graphitised composites. In all the carbonized composites anisotropic region has been observed at fiber-matrix interface which transforms into columnar type microstructure upon graphitisation. The extension of strong and weak columnar type microstructure is function of fiber volume fraction. SEM microscopy of the etched surface of the sample reveal that composites containing 40% fiber volume has minimum oxidation at the interface, revealing a strong interfacial bonding.

• Korean Journal of Materials Research
• /
• v.14 no.3
• /
• pp.203-210
• /
• 2004

Effects of various pretreatments on the adhesion of copper-coated polymer films were investigated. Copper-coated polymer films were prepared by an electron cyclotron resonance-metal organic chemical vapor deposition (ECR-MOCVD) coupled with a DC bias system at room temperature. PET(polyethylene terephthalate) film was employed as a substrate material and it was pretreated by industrially feasible methods such as chromic acid, sand-blasting, oxygen plasma and ion-implantation treatment. Surface characterization of the copper-coated polymer film was carried out by AFM(Atomic Force Microscopy) and FESEM(Field Emission Scanning Electron Microscopy). Surface energy was calculated by based on the value of the contact angle measured. The adhesion of copper/PET films was determined by a pull-off test according to ASTM D-5179. It was found that suitable pretreatment of the PET substrate was required for obtaining good adhesion property between copper films and the substrate. In this study the highest adhesion was observed in sand-blasting, and then followed by those of acid and oxygen plasma treatment. However, the effect of surface energy was insignificant in our experimental range. This is probably due to compensating the difference in surface energy from various pretreatments by exposing substrate to ECR plasma for 5 min or longer at the early stage of the copper deposition. Therefore, it can be concluded that surface roughness of the polymer substrate plays an important role to determine the adhesion of copper-coated polymer for the deposition of copper by ECR-MOCVD.

• Korean Journal of Agricultural Science
• /
• v.46 no.3
• /
• pp.569-577
• /
• 2019

The current experiment was conducted to compare nutrient utilization in the aged laying hens with different eggshell strengths or different intensities of brown eggshell color. Two metabolic trials with 96-week-old Hy-Line Brown laying hens were conducted. Twelve hens with a strong eggshell strength (SES) and 12 hens with a weak eggshell strength (WES) were selected and used in the first experiment, whereas 12 hens with dark brown eggshells (DBE) and 12 hens with light brown eggshells (LBE) were selected and used in the second experiment. All hens were fed a common commercial layer diet. Diets included chromic oxide as an indigestible marker to determine the apparent total tract retention (ATTR) of the gross energy (GE), dry matter, acid-hydrolyzed ether extract, nitrogen, neutral detergent fiber, acid detergent fiber, ash, and minerals. The results indicate that the ATTR of Ca in the aged laying hens with SES (59.7%) was greater (p < 0.05) than in the aged laying hens with WES (48.6%). However, the ATTR of the GE and other nutrients was not different between the hens with SES or WES. There were no differences in the ATTR of GE and nutrients between the hens with DBE or LBE. In conclusion, aged laying hens with SES have a greater ability to utilize dietary Ca than those with WES, indicating that the extent of dietary Ca utilization determines the eggshell strength of aged laying hens. However, nutrient utilization in diets may have little impact on eggshell brown coloration in aged laying hens.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.500-508
• /
• 2020

Background: Research on the status of many chemicals used in the semiconductor industry is needed. The purpose of this study was to describe the overall status of chemical use in the semiconductor industry in Korea and to examine it from a health perspective. Methods: Data on the status of chemical use and safety data sheets at 11 of 12 major semiconductor workplaces in Korea were collected. The number of chemical products and chemical constituents, quantities of chemicals, and trade secret ingredients used, as well as the health hazards were examined. Results: On average, 210 chemical products and 135 chemical constituents were used at the surveyed workplaces. Among all chemical products, 33% (range: 16-56%) contained at least one trade secret ingredient. Most of the trade secret ingredients were used in the photolithography process. Several carcinogens, including sulfuric acid, chromic acid, ethylene oxide, crystalline silica, potassium dichromate, and formaldehyde were also used. Only 29% (39 of 135) of the chemical constituents had occupational exposure limits, and more than 60% had no National Fire Protection Association health, safety, and reactivity ratings. Based on the aforementioned results, this study revealed the following. First, many chemical products and constituents are being used in the semiconductor industry and many products contained trade secret ingredients. Second, many products contained significant amounts of carcinogenic, mutagenic, and reproductive toxicant materials. Conclusion: We conclude that protecting workers in the semiconductor industry against harm from chemical substances will be difficult, due to widespread use of trade secret ingredients and a lack of hazard information. The findings of the status of chemical use and the health and safety risks in semiconductor industry will contribute to epidemiological studies, safe workplace, and worker health protection.

• Fisheries and Aquatic Sciences
• /
• v.25 no.11
• /
• pp.537-548
• /
• 2022

Apparent digestibility coefficients (ADCs) of dry matter, crude protein, crude lipid, nitrogen-free extract, energy and essential amino acids in animal-based feed ingredients were determined for olive flounder (Paralichthys olivaceus). A reference diet (RF) was formulated to contain 1.0% chromic oxide (Cr₂O₃) as an inert indicator. Nine test diets were formulated to contain RF and one of the feed ingredients (pollock meal [PM], jack mackerel meal [JMM], anchovy meal [AM], cod meal [CM], sardine meal [SM], sand eel meal [SEM], tuna meal [TM], meat meal [MM] and squid liver meal [SLM]) at a 7:3 ratio in each diet designated as PM, JMM, AM, CM, SM, SEM, TM, MM and SLM, respectively. Olive flounder, averaging 150 ± 8.0 g, were stocked at a density of 25 fish per tank in 400-L fiberglass tanks attached with fecal collection columns. Feces were collected from triplicate groups of fish one time a day for four weeks. Dry matter and crude protein ADCs of CM and SEM were significantly higher than the other tested ingredients. Lipid ADCs of JMM, CM and SEM were significantly higher than the other test ingredients. Energy ADCs of CM and SEM were significantly higher than that of the other tested ingredients. The availability of amino acids in CM was generally higher than the other animal protein sources. PM exhibited the lowest amino acid availability among the treatments. Interestingly, MM exhibited significantly higher nutrient digestibility than several marine-based ingredients. However, CM and SEM are seeming to be highly digestible and effective to use in olive flounder diet compared to the other tested ingredients. Overall, the results of this study provide information about the bioavailability of nutrients and energy in animal feedstuffs to apply when formulating cost-effective practical feeds for olive flounder.

• Journal of the Korean Magnetics Society
• /
• v.20 no.5
• /
• pp.191-195
• /
• 2010

We have investigated the effect of the removal of an initial oxide layer and the anodization time on the growth of the porous alumina layer. The porous alumina layer was fabricated by two-step anodization process with phosphoric acid. We have observed the changes in the uniformity of the pore structure by varying the removing time of the initial oxide layer after the first anodization with phosphoric acid and chromic acid, and noted that its uniformity improves with the removing time. We have also determined the thickness of the alumina layer after the final anodization process and found that the thickness increases linearly with the anodization time. Under 150 V of anodization voltage with phosphoric acid, the growth rate of the porous alumina layer is determined to be 22.5 nm/min.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.1
• /
• pp.86-94
• /
• 2015

This experiment was conducted to evaluate the chemical composition and amino acid (AA) digestibility of sunflower seed meal (SFSM) and to use this data to develop prediction equations for estimating AA digestibility for growing pigs. Ten SFSM were collected from five provinces in China. Twelve barrows ($38.8{\pm}4.6kg$), fitted with ileal T-cannula were allotted into two $6{\times}6$ Latin square designs. Each of six experimental periods comprised a 5-d adaption period followed by a 2-d collection of ileal digesta. The ten test diets contained 50% SFSM as the sole source of AA. Another nitrogen-free diet was used to measure the basal endogenous losses of crude protein (CP) and AA. Chromic oxide (0.3%) was used as an inert marker in each diet. There was considerable variation (CV>10%) among the ten SFSM in chemical composition (dry matter [DM]). The concentration of CP and ether extract (EE) ranged from 29.33% to 39.09% and 0.88% to 11.33%, respectively. Crude fibre (CF), neutral detergent fibre and acid detergent fibre ranged from 21.46% to 36.42%, 38.15% to 55.40%, and 24.59% to 37.34%, respectively. There was variation among the ten SFSM in apparent ileal digestibility (AID) and standardized ileal digestibility (SID) for lysine and threonine, which ranged from 63.16 to 79.21 and 55.19% to 72.04% for AID and 67.03% to 82.07% and 61.97% to 77.01% for SID, respectively. The variation in CP and methionine ranged from 60.13% to 74.72% and 74.79% to 88.60% for AID and 66.70% to 79.31% and 77.16% to 90.27% for SID, respectively. Methionine was a good indicator to predict AA digestibility. These results indicate that conventional chemical composition of SFSM was variable (CV>10%) among the ten SFSM (DM). The results of AID, SID and prediction equations could be used to evaluate the digestibility of SFSM in growing pigs.