• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.97-101
• /
• 1998

In this study, The ultra-precision finishing system is applicable to all kind of the cylnderical workpiece products fast and easy. This system was applied to chrome coated steel to investigate the characteristic of grinding; (1) 3$mu extrm{m}$ of abrasive film is not use for grinding performance. (2) Grinding condition of coated chrome steel would set up differently, in 30~12${\mu}{\textrm}{m}$, in 9~5${\mu}{\textrm}{m}$. (3) The surface roughness of chrome coated steel was about Ra 0.0009${\mu}{\textrm}{m}$ in abrasive grain size 5${\mu}{\textrm}{m}$.

• 한국재료학회지
• /
• 제7권3호
• /
• pp.203-212
• /
• 1997

This paper evaluated the feasibility of laser consolidation for improving the properties of the plasma coated layer, Further, the mechanim of the degradation sequence of the chrome carbide layer applied on the turbine blades was postualted. The laser consolidation could be successfully applied for improcing the surface properties of the plasma coated blade, if a proper condition was carefully chosen. The consolidated layer had erosion & corrosion resistance and vond strength superiro to those of the as-plasma coated layer. The properties of the consolidated layer were strongly dependent upon the degree of dilution, especially on the Fe pickup from the substrate. The degradation of the plasma coating layer was thought to be a reault of the repeating action of the solid particle erosion, corrosion penetration through the pores and oxide films formed along the interlayer surface and impact spalling.

• 열처리공학회지
• /
• 제19권4호
• /
• pp.200-207
• /
• 2006

In addition to the basic properties of the base and top coating agents, corrosion resistance of non-chrome magni 565 coating and characteristics of coating film when coated to steel substrate were studied. The system had a good wettability at room temperature. Moreover, both the contact angle and surface tension were affected little by the viscosity of coating agent and surface roughness of the steel substrate. And the samples coated with optimal conditions showed a great corrosion resistance in salt spray test with 1500 hours or longer of initial appearance time of rust. The coating film was composed of overlapping layer of zinc and aluminium flakes, and the thickness of base coat increased with an increase of base coat viscosity. Based on the C-F peaks of 1,1-Difluoroethaen homo-polymer, it was thought that the base coat was an inorganic polymer bond layer. Meanwhile, the top coat showed C-F peaks of polytetrafluoroethylene with C-H peaks of phenol in FT-IR analysis. From the lower weight loss of base coat in TG analysis, it was thought that cross linking density of base coat was larger than that of top coat. It was thought that the small exothermic reactions observed in DSC curves were due to the thermosetting resins contained in the coating agents. Compared to the non-coated specimen, the coated sample showed more higher polarization resistance and corrosion potential with lower corrosion current density.

• 한국정밀공학회지
• /
• 제14권10호
• /
• pp.68-74
• /
• 1997

The surface finishing system using the micro abrasive film was designed and manufactured to make the mirror surface of the cylindrical workpices. An experimental study of srface finishing was carried out to investigate the performance of mirror surface finishing system. The surface roughness value of stainless steel was about 0.2 .approx. 0.25 .mu. m Rmax, 0.02 .approx. 0.04 .mu. m Ra, using abrasive grain size of 12, 9 .mu. m. The surface roughness value of chrome coated workpiece was about 0.07 .approx. 0.11 .mu. m Ra using abrasive grain size 3 .mu. m. In the same condition, the chrome coated workpiece has obtained better surface roughness charateristics than the one of stainless steel.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.273-278
• /
• 1994

The surface finishing systems using the micro abrasive film were designed and manufactured to make the mirror surface of the cylindrical workpiece. An experimental study of surface finishing was carried out to investigate the performance of mirror surface finishing system. The surface roughness of stainless steel was about Rmax 0.2~0.25 .mu.m, Ra 0.02~0.04 .mu.m in abrasive grain size 12, 9 .mu.m. the surface roughness of chrome coated workpiece was about Rmax 0.07~ 0.11 .mu. m, Ra 0.01 in abrasive grain size 3 .mu. m. Also, to measure the mirror finishing time by mirror surface finishing system, the experiment was carried out on the chrome coated and ground roller of diameter 76mm and length 650mm. The finishing time and surface roughness were 40min and Rmax 0.1~0.13 .mu.m, Ra 0.01 .mu.m.

• 한국레이저가공학회지
• /
• 제16권4호
• /
• pp.17-23
• /
• 2013

The research for the development of roll-to-roll printing process is actively underway on behalf of the existing semiconductor process. The roll-to-roll printing system can make the electronic devices to low-cost mass production. This study is performed for developing the manufacturing technology of the printing roll used in the printing process of electronic devices. The indirect laser engraving technology is used to create printable roll and the printable roll is made out of the chrome coated roll after coating copper and polymer on the surface of steel roll, ablating the polymer on the surface of roll and etching the roll. The 3 dimensional laser scanner and roll rotating systems are constructed and the system control program is developed. We have used the fiber laser of 100 W grade, the 3 dimensional laser scanner and the 3 axes moving stage system with a rotating axis. We have found the optimal conditions by performing the laser patterning experiments and can make the minimum line width of $24{\mu}m$ by using the developed 3 dimensional laser scanner system.

• 열처리공학회지
• /
• 제25권1호
• /
• pp.6-13
• /
• 2012

HVOF thermal spray coating of 80%WC-CoFe powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and hard ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen by chrome plating and the brittleness of ceramics coatings. 80%WC-CoFe powder was coated by HVOF thermal spraying for the study of durability improvement of the high speed spindle such as air bearing spindle. The coating procedure was designed by the Taguchi program, including 4 parameters of hydrogen and oxygen flow rates, powder feed rate and spray distance. The surface properties of the 80%WC-CoFe powder coating were investigated roughness, hardness and porosity. The optimal condition for thermal spray has been ensured by the relationship between the spary parameters and the hardness of the coatings. The optimal coating process obtained by Taguchi program is the process of oxygen flow rate 34 FRM, hydrogen flow rate 57 FRM, powder feed rate 35 g/min and spray distance 8 inch. The coating cross-sectional structure was observed scanning electron microscope before chemical etching. Estimation of coating porosity was performed using metallugical image analysis. The Friction and wear behaviors of HVOF WC-CoFe coating prepared by OCP are investigated by reciprocating sliding wear test at $25^{\circ}C$ and $450^{\circ}C$. Friction coefficients (FC) of coating decreases as sliding surface temperature increases from $25^{\circ}C$ to $450^{\circ}C$.