• Journal of the Korean institute of surface engineering
• /
• v.39 no.6
• /
• pp.295-301
• /
• 2006

Hard chrome plating has been used in surface hard coating over 50 years both for applying hard coating and re-building of worn components. Hard chrome plating solution and mist pollute environment with very toxic $Cr^{6+}$(hex-Cr) known as carcinogen which causes lung cancer, High velocity oxy-fuel (HVOF) thermal spray coatings of WC base cermet and Co-alloy powders are the most promising candidates for the replacement of the traditional hard chrome plating. Surface properties, wear, and friction behaviors of micron size Co-alloy (T800) and micron size WC-l2Co (WC-Co) have been studied for the application as hard coatings. The temperature dependence of wear and friction behaviors of T800 and WC-Co have been investigated at the temperature of $25^{\circ}C$ and $538^{\circ}C$ for the application to high speed spindle.

• Journal of Korea Foundry Society
• /
• v.35 no.6
• /
• pp.178-184
• /
• 2015

Due to excellent abrasion resistance the high-chrome white irons are widely used in mining and mineral industries. Minor variation of carbon content in 28% chrome white iron resulted in difference in primarily solidified microstructure. Sub-eutectic (hypoeutectic) composition led to formation of primarily solidified dendrites. Formation of primarily solidified dendrites which were supersaturated with carbon and chrome also caused precipitation of fine secondary carbides that are different from relatively large plate type $M_7C_3$ carbides in the eutectic structure. Small portion of primarily solidified dendrite expected to contribute significantly to the improvement of abrasion resistance of the white iron because the dendrites provided mechanical support to carbides. The relative fraction of primary dendrite increased with reduction of carbon content from the eutectic composition. The increased fraction of primary dendrite increased hardness value of the white irons.

• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.77-85
• /
• 1999

When producing partial denture using a Chrome-cobalt alloy being used universally, 45 pattern of them to compare casting characters according to 5 burying methods(special ring method, plastic ring method, general metal ring method) and 5 casting directions(straight, upper, lower, left and right directions) were compared and evaluated. The results were as follows : 1. The comparison of casting characters in accordance with burying type shows that the special ring method to install blind air vent using utility wax was the highest rate of 76.9%, followed by 69.1% of the plastic ring to cast without ring and 61.1% of the metal ring method being used universally respectively. Namely the special ring method was best. The significant level was P<0.05 statistically. 2. The comparison of casting character in accordance with casting directions shows that the straight casting was the highest of 77.9%, and followed by right casting of 74.2%, left casting of 66.7%, upper casting of 63.5%, and lower casting of 62.9% respectively, Namely the straight casting was best.

• Journal of Environmental Health Sciences
• /
• v.19 no.3
• /
• pp.22-28
• /
• 1993

In order to investigate the hygienic chemical conditions of farm waters used as the potable and cleaning water for cow, we examined the pH, turbidity, KMnO$_4$ consumption, total hardness, chlorine, sulfate, NH$_3$-N, NO$_3$-N, lead, maganese, copper, zinc, fluoride and chrome for 78 farm waters around Kyunggi Province. Of 78 farm waters tested, average pH was 6.70+_0.06, turbidity 0.724 $\pm$ 0.081, KMnO$_4$ consumption 4.200 $\pm$ 0.256 mg/l, total hardness 107.46 $\pm$ 6.90 mg/l, NH$_3$-N 0.043 $\pm$ 0.037 mg/l, NO$_3$-N 8.096 $\pm$ 0.652 mg/l, chlorine 21.414 $\pm$ 2.187 mg/l, sulfate 12.737 $\pm$ 1.511 mg/l, lead 0.076 $\pm$ 0.001 mg/l, manganese 0.029 $\pm$ 0.004 mg/l, copper 0.018 $\pm$ 0.002 mg/l, zinc 0.055 $\pm$ 0.005 mg/l, chrome 0.048 $\pm$ 0.002 mg/l and fluorine 0.011 $\pm$ 0.001 mg/l. According to the geological characteristics, the concentrations of total hardness, NO$_3$-N, pH and chlorine in farm waters of Hwasung gun were higher than those in Yangpyung and Kwangju gun. In hygienic chemical items tested, there were high significanc among NO$_3$-N, total hardness, sulfate and chlorine. KMnO$_4$ consumption was significant with NH$_3$-N, sulfate and pH. But in heavy metals, there were significance between lead and copper, copper and chrome, and copper and fluorine.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.5 no.2
• /
• pp.47-56
• /
• 1997

To examine of possibility protein recycling of shaving scraps contained chrome generated from manufacturing process of leather, the characteristics of hydrolyzed protein that differently treated with MgO as alkaline agent were investigated. In alkaline hydrolysis of saving scraps treated with MgO, MgO had to be treated over 5.0% to maintain over pH 8.0 that is insoluble of chrome. Under the condition of alkaline treated with MgO, the solubility of chrome is low with about 60%. The average molecular weight of hydrolyzed proteins from shaving scraps treated with MgO was about 80~100 KD. The amino acid contents of that were largely collagen proteins such as glycine, alanine and proline, and acidic amino acids such as aspartic acid and glutatamic acid. The contents of Mg, Ca and Na in hydrolyzed protein were too much as liquid fertilizer, and chrome contents was 30~40 ppm that largely decreased in comparing with raw materials (40,000~42,000 ppm).

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.1-7
• /
• 1995

Spectrophotometric determination of U(VI) and Th(IV) by Flow injection method is described. Chrome Azurol S forms water soluble complexes with U(VI) and Th(IV) in the presence of cethyltrimethylammonium bromide. The maximum adsorption of U(VI) and Th(IV) complexes are at 600nm with molar absorptivity of $2.3{\times}10^5Lmol^{-1}cm^{-1}$ and 611nm with molar absorptivity of $3.8{\times}10^5Lmol^{-1}cm^{-1}$ in acetate buffer medium having pH 5.0 and 5.5. The calibration curves of U(VI) and Th(IV) are linear over the range of 0.1~0.8ppm and the correlation coefficients are ca. 0.9960 and 0.9930 respectively. The detection limits(S/N) are 20ppb for U(VI) and 15ppb for Th(IV). The relative standard deviation are ${\pm}1.8%$ for U(VI) and ${\pm}2.1%$ for Th(IV). The sample throughput was ca. $50hr^{-1}$.

• Journal of Platform Technology
• /
• v.9 no.3
• /
• pp.3-17
• /
• 2021

Advanced persistent threat (APT) attacks are attacks aimed at a particular entity as a set of latent and persistent computer hacking processes. These APT attacks are usually carried out through various methods, including spam mail and disguised banner advertising. The same name is also used for files, since most of them are distributed via spam mail disguised as invoices, shipment documents, and purchase orders. In addition, such Infostealer attacks were the most frequently discovered malicious code in the first week of February 2021. CDR is a 'Content Disarm & Reconstruction' technology that can prevent the risk of malware infection by removing potential security threats from files and recombining them into safe files. Gartner, a global IT advisory organization, recommends CDR as a solution to attacks in the form of attachments. There is a program using CDR techniques released as open source is called 'Dangerzone'. The program supports the extension of most document files, but does not support the extension of HWP files that are widely used in Korea. In addition, Gmail blocks malicious URLs first, but it does not block malicious URLs in mail systems such as Naver and Daum, so malicious URLs can be easily distributed. Based on this problem, we developed a 'Dangerzone' program that supports the HWP extension to prevent APT attacks, and a Chrome extension that performs URL checking in Naver and Daum mail and blocking banner ads.

• Cement Symposium
• /
• s.36
• /
• pp.150-155
• /
• 2009

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.319-322
• /
• 2017

크롬비트는 크롬 OS를 기반으로 하여 사용자 맞춤형 클라우드 서비스를 제공하는 스틱 PC이다. 기존의 크롬북이 이동성을 강조한 외부 인터넷 환경에 특화된 기기라고 할 때, 크롬비트는 스마트 TV구축 등을 비롯한 내부 인터넷 환경에 특화된 기기라고 볼 수 있다. 이처럼 크롬 OS를 실내와 실외에서 사용 가능하다는 것을 감안한다면 클라우드와 사물인터넷 등을 매개로 하는 4차 산업 혁명에 가장 근접한 OS 임에 틀림이 없다. 그럼에도 불구하고 현재 이 운영체제의 개발 속도와 더불어 보안 취약점 분석을 위한 방안은 전혀 마련되어 있지 않다. 그래서 본 논문에서는 취약점 분석 쉘 스크립트 실행을 통한 성능 향상 방안 마련과 크롬 OS의 보안 성능 개선 여부 확인을 살펴보고자 한다.

• Journal of Power System Engineering
• /
• v.21 no.6
• /
• pp.21-30
• /
• 2017

This study deals with the characteristics of degraded stainless steel. Stainless steel is heat treated to ensure mechanical properties when designing or manufacturing machinery parts or equipment. In this study, the mechanical properties and wear characteristics of three kinds of stainless steels after artificially heat-treated at 753 K~993 K, where chrome depletion occurs near the grain boundary, were evaluated. The microstructure and fracture surface were also observed. From the results, friction coefficient and wear loss decreased with increasing the heat treatment temperature regardless of the type of stainless steel. Also, as the tensile strength increased, the friction coefficient and wear loss decreased. Wear loss showed proportional to a tendency to increase with increasing friction coefficient.