• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.143-160
• /
• 1996

The purpose of this study was to evaluate the response in aspect of attachment and growth rate of osteoblasts and growth rate of osteoblasts and human gingival fibroblasts to the commercially pure titanium(CP titanium)and titanium alloy(Ti-6AI-4V) that are used widely as implant materials, and to obtain the basic information to ideal implant materials. In the studly, commercially pure titanium in first test group, titanium alloy(Ti-6AI-4V) in second test group, cobalt-chrome-molybdenum alloy(Co-Cr-Mo alloy) in positive control group, and tissue culture polystyrene plate in negative control group were used. The results of this study were as follows. 1. Bone marrow cells cultured on CP titanium and Ti-6Al-4V showed significantly greater attachment and growth rate(p(0.05) compared to Co-Cr-Mo alloy in each time. 2. There were no significant differences(p>0.05) in attachment and growth rate of bone marrow cells cultured on CP titanium and Ti-6AI-4V or tissue culture plate. 3. Most bone marrow cells cultured on CP titanium, Ti-6Al-4V and tissue culture plate were attached well to each substratum in first 2days, and then, grew at higher growth rate. On the other hand, some cells cultured on Co-Cr-Mo alloy failed to attach in first 2 days, and then, attached cells grew at lower growth rate than other groups. 4. Attachment and growth rates of gingival fibroblasts cultured on CP titanium and Ti-6Al-4V showed no significant differences(p>0.05) compared to Co-Cr-Mo alloy in 2 days, but significantly greater increase(p<0.05) in 5 and 9 days. 5. There were no significantly differences(p>0.05) between growth rates on gingival fibroblasts cultured on CP titanium, Ti-6Al-4V and tissue culture plate in 2 and 5days, but a significant lower growth rate(p<0.05) on CP titanium and Ti-6Al-4V versus tissue culture plate. 6. Some gingival fibroblasts cultured on all specimen groups failed to attach, but attached cells grew well, especially on CP titanium, Ti-GAl-4V and tissue culture plate. 7. There were no significant differences(P>0.05) between growth rates of both bone marrow cells and gingival fibroblasts cultured on CP titanium and Ti-6AI-4V. As a result of this study, both commercially pure titanium and Ti-6AI-4V showed excellent biocompatibility and there was no significant difference in the cellular response to the both metals. Bone marrow cells cultured on each substratum showed significantly greater growth rate and responded sensitively to cytotoxic effects of metal surfaces compared to gingival fibroblasts. Considering cell response to the substrate, it was likely that the composition itself of titanium metals have no significant effect on the biocompatibility. Further study need to be done to evaluate the influence of surface characteristics on cellular responses.

• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.576-584
• /
• 2020

압출기 스크류 소재는 주로 냉간 금형 공구강(SKD11)이 사용되고 있는데, 최근 합성 수지의 발달로 화학적 부식 및 마모 발생이 증가하고 있다. 이를 개선하기 위해 내마모성과 내식성이 우수한 고크롬 주철의 사용이 요구되지만, 난가공성으로 사용이 기피되고 있다. 본 연구에서는 고크롬 합금의 난가공성을 개선하기 위해 Fe-23Cr-2.5C-1.2Si-1.08Mn-0.48Mo-0.3V 조성의 고크롬 주철에 가공성이 우수한 니켈을 0, 0.5, 1.0, 1.5 % 첨가하여 주조하고 열처리를 진행한 후, 선삭 시험과 동전위 분극 시험을 통해 니켈이 피삭성 및 내식성에 미치는 영향을 분석하여 SKD11과 비교하였다. 고크롬 주철은 고주파 진공유도용해로를 사용하여 주조하고, 이후 750 ℃에서 5시간 동안 풀림 처리와 풀림 처리 후 1100 ℃에서 5시간동안 재열처리를 실시하였다. 750 ℃ 풀림 처리 후 선삭 시험을 실시한 결과 니켈의 함량이 1.0% 이상에서 피삭성은 현저히 향상되었다. 5% NaCl 용액에서 동전위 분극 시험 결과 주방상태와 750 ℃ 풀림 처리에서는 니켈의 함량이 증가할수록 내식성은 저하되었으나, 1100 ℃ 재열처리 후에는 1.5% 니켈에서 가장 우수한 내식성을 나타냈다.

• The Journal of Advanced Prosthodontics
• /
• 제12권2호
• /
• pp.100-106
• /
• 2020

PURPOSE. The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and computer-aided manufacturing (CAD/CAM) technique, as compared with crowns manufactured by other digital and the conventional casting technique. Additionally, the influence of oxide layer on the fitting accuracy of specimens was tested. MATERIALS AND METHODS. A total of 40 test specimens made from Co-Cr alloy were investigated according to the fitting accuracy using a replica technique. Four different methods processing different materials were used for the manufacture of the crown copings (milling of presintered (Ceramill Sintron-group_cer_sin) or rigid alloy (Tizian NEM-group_ti_nem), selective laser melting (Ceramill NPL-group_cer_npl), and casting (Girobond NB-group_gir_nb)). The specimens were adapted to a resin model and the outer surfaces were airborne-particle abraded with aluminum oxide. After the veneering process, the fitting accuracy (absolute marginal discrepancy and internal gap) was evaluated by the replica technique in 2 steps, before removing the oxide layer from the intaglio surface of the crowns, and after removing the layer with aluminum oxide airborne-particle abrasion. Statistical analysis was performed by multifactorial analysis of variance (ANOVA) (α=.05). RESULTS. Mean absolute marginal discrepancy ranged between 20 ㎛ (group_cer_npl for specimens of Ceramill NPL) and 43 ㎛ (group_cer_sin for crowns of Ceramill Sintron) with the oxide layer and between 19 ㎛ and 28 ㎛ without the oxide layer. The internal gap varied between 33 ㎛ (group_ti_nem for test samples of Tizian NEM) and 75 ㎛ (group_gir_nb for the base material Girobond NB) with the oxide layer and between 30 ㎛ and 76 ㎛ without the oxide layer. The absolute marginal discrepancy and the internal gap were significantly influenced by the fabrication method used (P<.05). CONCLUSION. Different manufacturing techniques had a significant influence on the fitting accuracy of single crowns made from Co-Cr alloys. However, all tested crowns showed a clinically acceptable absolute marginal discrepancy and internal gap with and without oxide layer and could be recommended under clinical considerations. Especially, the new system Ceramill Sintron showed acceptable values of fitting accuracy so it can be suggested in routine clinical work.

• 열처리공학회지
• /
• 제25권1호
• /
• pp.6-13
• /
• 2012

HVOF thermal spray coating of 80%WC-CoFe powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and hard ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen by chrome plating and the brittleness of ceramics coatings. 80%WC-CoFe powder was coated by HVOF thermal spraying for the study of durability improvement of the high speed spindle such as air bearing spindle. The coating procedure was designed by the Taguchi program, including 4 parameters of hydrogen and oxygen flow rates, powder feed rate and spray distance. The surface properties of the 80%WC-CoFe powder coating were investigated roughness, hardness and porosity. The optimal condition for thermal spray has been ensured by the relationship between the spary parameters and the hardness of the coatings. The optimal coating process obtained by Taguchi program is the process of oxygen flow rate 34 FRM, hydrogen flow rate 57 FRM, powder feed rate 35 g/min and spray distance 8 inch. The coating cross-sectional structure was observed scanning electron microscope before chemical etching. Estimation of coating porosity was performed using metallugical image analysis. The Friction and wear behaviors of HVOF WC-CoFe coating prepared by OCP are investigated by reciprocating sliding wear test at $25^{\circ}C$ and $450^{\circ}C$. Friction coefficients (FC) of coating decreases as sliding surface temperature increases from $25^{\circ}C$ to $450^{\circ}C$.

• 한국해양환경ㆍ에너지학회지
• /
• 제7권2호
• /
• pp.75-81
• /
• 2004

고농도로 오염된 마산만 퇴적물 2.1×10/sup 6/ ㎥ 마산시 가포해역에 투기되었다. 준설토가 투기된 가포해역의 한 조석주기 동안 해수 중금속 농도는 Zn 1.15∼2.59, Cu 1.08∼1.96, Pb ND∼0.42 그리고 Ni 0.57∼1.35 ㎍/l로서 진해만의 평균 농도인 Zn 0.80, Cu 1.02, Pb 0.01 그리고 Ni 0.70 ㎎/l 와 비교할 때 높은 농도이었다. 가포지역 퇴적물 표층의 중금속 오염 수준을 미국 EPA 기준으로 평가한 결과 Non polluted∼Moderately polluted level 이었으며, Adverse Biological Effects 기준으로 평가하였을 때 Cu와 Zn은 ERL∼ERM, Cd, Cr, Pb 그리고 Ni은 ERL 수준이었다. 퇴적층별 중금속 함량은 상층부보다 하층부에서 중금속 농도가 높게 나타났으며 이러한 오염도 분포 경향은 상대적으로 오염도가 낮은 지역의 준설토가 투기지역 퇴적물의 상층부를 형성하고 있기 때문이다. 가포지역에서 채집된 굴에서 Zn 238.96, Cu 5.29, 바지락에서 Zn 17.71, Cu 1.00. 진주담치에서 Zn 187.98, Pb 0.28, Cr 0.15, Mn 4.23, Sr 1.45 그리고 Fe 100.33㎍/g wet wt.이 검출되어 투기장 외부 호안에서 채취된 시료보다 높은 경향을 나타내었다. 그러나 이와 같은 패류의 중금속 측정결과는 국립수산물품질검사원의 정밀검사기준(패류)인 Pb 2.0 및 Cd 2.0 ㎍/g과 비교하였을 때 기준치 이하에 해당하였다.

• 한국환경보건학회지
• /
• 제27권3호
• /
• pp.1-10
• /
• 2001

This study was performed to evaluate chromium in air and chromium concentrations in whole blood and urine of workers at chrome plating factories, and to determine the correlation between environmental and biological chromium levels. This study involved 29 workers as study group and 24 undergraduate students as control group. The geometric means(GM) of airborne hexavalent chromium and total chromium concentrations in the plating factories were 3.4 $\mu\textrm{g}$/㎥ and 10.8 $\mu\textrm{g}$/㎥, respectively. Hexavalent chromium levels in two of total 29 measurements exceeded the korean occupational exposure limit and the American Conference of Governmental Industrial Hygienists Threshold Limit Value(ACGIH-TLV) of 50$\mu\textrm{g}$/㎥. Only one sample for total chromium exceeded the Korea occupational exposure limits, the ACGIH-TLV, and the National Institute for Occupational Safety and Health Recommended Exposure Limits(NIOSH-REL) of 500 $\mu\textrm{g}$/㎥. The GM of chromium concentrations in blood and urine of workers exposed to chromium were 8.4 $\mu\textrm{g}$/L and 11.9 $\mu\textrm{g}$/L. The GM of chromium concentrations in blood and urine of workers exposed to chromium were 8.4 $\mu\textrm{g}$/L and 11.9 $\mu\textrm{g}$/L, respectively, whereas the chromium concentrations in blood and urine of the controls were 1.6 $\mu\textrm{g}$/L and 3.8 $\mu\textrm{g}$/L, respectively. There were statistically significant differences of blood and urine concentrations between study group and control group (p<0.01). The chromium concentrations in urine were most highly related to hexavalent chromium, concentration in air(r=0.642, p<0.01). Also, there was a relatively high correlation between the hexavalent chromium concentrations in air and chromium concentrations in whole blood(r=0.557, p<0.05). These results indicate that whole-blood chromium with urinary chromium could be an indicator of chromium body burden caused by exposure to chromic acid mist in plating operation.

• 복식
• /
• 제60권6호
• /
• pp.101-116
• /
• 2010

The purpose of this thesis is in investigating the Korean twenties face color, according to the seasons, thus presenting a sample Korean Facial Color Map. The face is divided into 20 parts to take measures, and investigated through the four seasons. Minolta Chrome Meter CR-200 has been used for taking measures of the face color. Measuring subjects and area are, University students of both sex, living in the Suncheon. They are of ages the twenties. Classified measuring values of the skin colors are expressed following to the A. H. Munsell's color system. The result of this study is as followed. When comparing parts among male and female(make-up and no make-up) groups for changes with seasonal hue and value of a face color, differences have been sighted among these three groups following the seasons ; Spring(March), Summer(June), Autumn (September) and Winter(December). According to the result of Duncan's proof, the differences of the women group with the make-up attitude was shown only in value from Summer and Autumn, but no differences have been sighted between the make-up group and the no make-up group, concerning hue. Concerning hue, it was shown that men had a redder hue than women in all seasons. In Spring, both men and women had the strongest red hue, then from Summer to Autumn a strong yellowish hue appeared, to make place to a diverse coloring in Winter, followed by a reddish hue, to start all over again. Value number proved to be lower in the Summer and Autumn for the no make-up group when compared to the make-up group, showing an averaging high number for all seasons when putting on make-up; and men value number shows the lowest of the three groups.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.9-17
• /
• 2014

PURPOSES : The purpose of this study is to assess removal efficiency of non-point pollutants and applicability for non-point pollutant reduction facilities by conducting the demonstration project operation. METHODS : In order to analyze removal efficiency of non-point pollutants for facilities such as a grassed swale, a small constructed wetland, a free water surface wetland, a horizontal sub-surface flow wetland, and a sand filtration, the field data including specifications of facilities, rainfall, inflow and runoff rainfall effluent etc. was acquired after occurring rainfall events, and the acquired data was analyzed for removal efficiency rate to assess road non-point pollutants facilities using event mean concentration (EMC) and summation of load (SOL) methods. RESULTS : The results of analyzing rainfall effluent, non-point pollutant sources showed that total suspended solid (TSS), chemical oxygen demand (COD), biochemical oxygen demand (BOD), total nitrogen (TN), total phosphorus (TP), chrome (Cr), zinc (Zn), and lead (Pb) can be removed through non-point pollutant reduction facilities by 60.3% ~ 100%. Especially removal efficiency of TSS, COD and BOD is relatively higher than removal efficiency of other non-point pollutant sources in all kind of non-point pollutant facilities. CONCLUSIONS : Based on the result of this study, even though natural type of non-point pollutant reduction facilities for roads occupy small areas comparing with drainage basin areas, most of non-point pollutant sources would be removed through the facilities.

• 한국산업보건학회지
• /
• 제1권2호
• /
• pp.117-127
• /
• 1991

The exposure level of chromium and nickel for chrome and nickel plating workers were evaluated. Chromium and nickel concentrations in serum from 82 exposed workers and 66 controls, who were not exposed occupationally to metals, were analyzed by flameless atomic absorption spectrophotometry. The results were as follows : 1. The recovery percent of chromium and nickel concentrations in personal air samples were 95-108.2%, 88.0-107.7%, precisions (C.V., %) were 2.7-3.1%, 2.1-4.4%. respectively. 2. The recovery percent of chromium and nickel concentrations in serum were 93.6-106.4%, 91.3-107.9% and precisions (C.V. %) were 1.1-7.6%, 2.4-5.4% respectively. 3. The exposure level of chromium and nickel concentrations in the place of preparation process were $2.0{\pm}2.00{\mu}g/m^3$, chromplating were $35.7{\pm}53.07{\mu}g/m^3$, $2.8{\pm}3.42{\mu}g/m^3$, nickelplating were $4.6.0{\pm}5.8{\mu}g/m^3$, $18.62{\pm}4.41{\mu}g/m^3$, and covering were $2.9{\pm}2.02{\mu}g/m^3$, $1.1{\pm}0.47{\mu}g/m^3$ respectively. There were significant difference of concentrations for chromium and nickel in workplaces by groups statistically. 4. Chromium concentrations in serum of exposed group and control were $0.68{\pm}0.399{\mu}g/l$, $1.41{\pm}0.748{\mu}g/l$, respectively. There were significant difference of concentrations for chromium and nickel in serum by groups statistically. 5. Chromium and nickel concentrations in serum of exposed group were not significant by workplaces.

• 전기전자학회논문지
• /
• 제19권4호
• /
• pp.535-540
• /
• 2015

디지털 X-선 촬영 장치에 응용되는 MSGC형 검출기를 설계 및 제작하였다. 기판의 재질은 실리콘기판과 유리기판을 사용하였으며, 기판위에 증착된 전극물질은 포토리소그래피 공정을 이용하였으며, 크롬을 전극의 재료를 이용하였다. 양전극의 폭은 $10{\mu}m$, 음전극의 폭은 $290{\mu}m$로 각각 제작하였다. 양전극과 음전극 사이의 거리는 $100{\mu}m$ 이고, 검출기의 유효영역은 $50{\times}50mm^2$로 설계하였다. 그리고 양전극의 수는 80개로 하였고, 양전극의 전압이 600 Volt 이상 인가한 경우 양전극과 음전극 부분이 방전되어 끊어진 현상을 확인하였다. 결과적으로 검출기체인 Ar(90%) + $CH_4$(10%) 기체 하에서 X-선관의 전압은 42 kV, 최대전류 1 mA까지 인가하여 연구를 수행하였다.