• 한국안광학회지
• /
• 제10권1호
• /
• pp.9-15
• /
• 2005

CR 렌즈에 가한 미세응력 크기의 시각화를 위한 편광기는 광원-편광판-시료-편광판-CCD-컴퓨터-chrome 변환 로 구성하였고, 각 편광판의 단계별 광 파의 $E_1$, $E_2$의 성분을 분석하여, 주 응력차 ${\sigma}_1-{\sigma}_2$와 무늬 차수(n)를 유도하였다. 시료의 광 축이 주 응력 방향과 일치하는 것으로부터 2 차원 모델을 결정할 수 있다. 광파에 작용하는 이중 굴절성과 위상 지연은 주 응력차(${\sigma}_1-{\sigma}_2$)에 비례하며, 최종 광 파의 세기는 $sin^2({\Delta}/2)$에 비례하고, ${\Delta}/2=n{\pi}$ (n=0, 1, 2, ${\ldots}$)일 때 흡광이 일어난다. 미세 응력에 의한 광탄성은 chrome 변환을 이용하여 분석 가능하였으며, 이미지는 뚜렷하였다.

• 한국잠사곤충학회지
• /
• 제26권2호
• /
• pp.26-31
• /
• 1984

In general, acid dyes been used for silk dyeing, but acid dyed silk shows weakness in color fastess, To improve this defect, the silk dyed with Acid Mordant Blue 13 was treated with chromes salts solution. Some mechanical properties and dyeing behaviors of the chrome mordant with dyed silk fabric were tested in this work. The tensile strength of silk fabric treated with chrome salts solution was decreased as the duration of treatment was increased. The mean rate constant (K) of photo-degradation was 1.019, and 1.047 after treated with Cr (III) and Cr (Ⅵ), respectively, whereas it was 1.304 in untreatment. The washing fastness of silk fabric also was improved by treatment with mordant and it was 3rd-4th grade and 4th grade when silk was treated with Cr (III) and Cr (Ⅵ), respectively, while untreatment gave 1st grade. The colour of dyed silk fabric was 2.5RP.3/10, but it was 5PB.4/3 and 5PB. 4/4 when the silk fabric was treated with Cr (III) for two hours and with Cr (Ⅵ) for one hour at 90$^{\circ}C$, respectively.

• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.670-677
• /
• 2006

Vacuum interrupters are used in various switch-gear components such as circuit breakers, distribution switches, contactors. The electrodes of a vacuum interrupter are manufactured of sinter-forged Cu-Cr material for good electrical and mechanical characteristics. Since the closing velocity is 1-2m/s and impact deformation of the electrode depends on the strain-rate at the given velocity, the dynamic material property of the sinter-forged Cu-Cr alloy is important to design the vacuum interrupter reliably and to identify the impact characteristics of a vacuum interrupter accurately. This paper is concerned with the dynamic material properties of sinter-forged Cu-Cr alloy for various strain rates. The amount of chrome is varied from 10 wt% to 30 wt% in order to investigate the influence of the chrome content on the dynamic material property. The high speed tensile test machine is utilized in order to identify the dynamic property of the Cu-Cr alloy at the intermediate strain-rate and the split Hopkinson pressure bar is used at the high strain-rate. Experimental results from both the quasi-static and the high strain-rate up to the 5000/sec are interpolated with respect to the amount of chrome in order to construct the Johnson-Cook and the modified Johnson-Cook model as the constitutive relation that should be applied to numerical simulation of the impact behavior of electrodes.

• 한국염색가공학회지
• /
• 제4권1호
• /
• pp.16-20
• /
• 1992

This study was to examine the dry cleaning resistance of chrome bonding in the chrome-tanned garment leathers, and to analyze their chrome content. The results are as follows: 1. The average percentage of the chrome content (as $Cr_2O_3$) in the chrome-tanned garment leathers was 2.7%. 2. By the dry cleaning treatment and its numbers, the values of chrome content were little affected. 3. The resistance against dry cleaning with perchloroethylene $(Cl_2C = CCl_2)$ of samples was confirmed.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2002년도 춘계학술발표회 초록집
• /
• pp.36-36
• /
• 2002

Effects of pulse-plating on the wear and corrosion resistance of chrome-carbon layers were studied. The plating were carried out at $06A/\textrm{cm}^2$ in modified Sargent bath containing formic acid at $53^{\circ}C$. The chrome layer were super-saturated with carbon up to 2.0wt. %, which precipitated as chrome carbide such as $Cr_{23}C_6$ after vacuum aging above $200^{\circ}C$ for 1 hour. This resulted in improvement of hardness and wear resistance of the chrome layer. Considering the reduction of corrosion resistance due to the thermal effect, optimum vacuum aging condition of the chrome layer in this study was I-hour at $200^{\circ}C$.

• 대한치과기공학회지
• /
• 제28권2호
• /
• pp.355-366
• /
• 2006

The purpose of this study was to determine if repeated casting has a detrimental effect on the corrosion behavior of nickel-chrome casting alloys. The X-ray diffraction analysis, vickers hardness test, SEM, EDX and corrosion test were performed to determine the effects of recasting on chemical composition, microstructure, physical property, castability and corrosion behavior of nickel-chrome casting alloys. The X-ray diffraction analysis results for the cast and recast specimens of the VeraBond and the Rexillium V showed that major crystal phase contained nickel-chrome compounds, Nickel carbide and Chrome carbide. Microstructure analysis results for the cast and recast specimens of the VeraBond and the Rexillium V showed recasting has no effect on microstructure. EDX analysis results indicated the percentage of the main component nickel(Ni) in the specimens of the VeraBond showed a tendency to increase with recasting, but those of other components Carbon(C) showed a tendency to decrease with recasting, Chrome(Cr), Silicon(Si), Aluminium(Al) and molybdenum(Mo) showed no changes in the percentage. The percentage of the main component nickel(Ni) in the specimens of the Rexillium V showed a tendency to increase with recasting, but those of other components silicon(Si), carbon(C) and molybdenum(Mo) showed a tendency to decrease with recasting, chrome(Cr) and aluminium(Al) showed no changes in the percentage. The vickers hardness results for the cast and recast specimens of the VeraBond and the Rexillium V showed a tendency to decrease with recasting, but the differences for the first to fifth cast were not statistically significant. The castability results for the cast and recast specimens of the VeraBond and the Rexillium V showed a tendency to decrease with recasting, but the differences for the first to fifth cast were not statistically significant. The cast and recast specimens of the VeraBond and the Rexillium V showed no differences in the corrosion resistance. The results indicate that the VeraBond and the Rexillium V can be safely recast.

• 태양에너지
• /
• 제9권2호
• /
• pp.69-77
• /
• 1989

The thermal degradation of electroplated black chrome coating on Ni substrates has been investigated by using Auger electron spectroscopy technique. The sample was prepared by electroplating at $20^{\circ}C$ for 20 seconds with the current density at $0.4A/cm^2$. Its surface oxidation process was investigated with 1 hour annealed sample for a temperature range of $300-550^{\circ}C$. While its optical solar absorption was dominated by fine metallic Cr particles, thermal degradation was occurred primarily by oxidation of metallic Cr particles as increasing the annealing temperature.

• 대한치과교정학회지
• /
• 제15권2호
• /
• pp.163-174
• /
• 1985

The requirements of orthodontic wire should include chemical stability, non-discoloration and non-corrosion in oral environment. Ability to be soldered, ease of fabrication and elasticity should be also considered. The purpose of this study was to compare and analyze the physical properties of Tru-chrome wire and manufactured E.S.S. (Experimental Stainless Steel) wire similar to Tru-chrome. The results were as follows: 1. Tru-chrome wire and E.S.S. wire were SUS 304 which was 18 Cr-8Ni austenite stainless steel. There was not significant difference in each composition between two wires. 2. There were not significant differences in ultimate tensile strength, yield strength, elongation and modulus of elasticity between Tru-chrome and E.S.S. wires. 3. There was not significant difference between flexuree modulus of elasticity of Tru-chrome and E.S.S. wires. 4. Micro-hardness value of E.S.S. wire was more than that of Tru-chrome wire and they were softened significantly by solution heat reatment. 5. Micro-structure of Tru-chrome and E.S.S. wires showed fibrous interlocking grains, and an austenite structure after solution heat treatment. 6. There was significant difference between corrosion rate of Tru-chrome and E.S.S. wires.

• 대한금속재료학회지
• /
• 제47권2호
• /
• pp.99-106
• /
• 2009

The high temperature corrosion properties of heat resistant steels were investigated in oxidation atmosphere including sulfur dioxide. The heat resistant steels of T22, T92, T122, T347HFG and T304H were evaluated at 620, $670^{\circ}C$ for 400 hours. The corrosion rates showed a decreasing tendency while chrome contents of those steels increased from 2 mass.% to 19 mass.%. The in crease in temperature increasement has an more effect on the corrosion rates of low chrome steels than high chrome steels. The weight gains of T22, T92, T304H at $670^{\circ}C$ were 3.7, 1.65, 1.23 times compared with those at $620^{\circ}C$. The external scale formed on T22 was composed of hematite, magnetite and Fe-Cr spinel and internal layer including iron oxide mixed with sulfide. The scales formed on T92, T122, T304H consisted of an outer layer of hematite and inner layer of chrome oxide and hematite. The proportion of chrome oxide at inner layer was increased when the chrome contents in heat resistant steels were increased.

• 공업화학
• /
• 제10권8호
• /
• pp.1104-1108
• /
• 1999

본 연구에서는 피혁분에서 크롬을 제거하여 여러 면으로 활용 가능한 단백질자원을 얻고자 하였다. 피혁분은 크롬이 콜라겐사이에 가교결합을 하여 크롬-콜라겐염(Cr-collagenate)을 형성하므로 1단계 공정에서 $Ca(OH)_2$용액에 침지(steeping)하여 팽윤(swelling)-팽창(plumping)시켜, $H_2SO_4$용액으로 크롬을 용출시켰다. 2단계 공정에서 NaOH용액으로 팽윤-팽창시키고 $H_2O_2$용액으로 용해도가 큰 Cr(VI)으로 산화하여 $H_2SO_4$용액으로 용출시켜 탈 크롬을 마무리하였다. 1단계 공정에서 $3%-Ca(OH)_2$용액, $0.8%-H_2SO_4$용액으로 2단계 공정에서 0.1%-NaOH용액, $3%-H_2O_2$용액, $1%-H_2SO_4$용액으로 순차적으로 침지하여 효율적으로 완전 탈 크롬을 할 수 있었다. 완전 탈 크롬된 피혁분에는 수분 10.68%일 경우, 조 단백질이 79.81% 함유하였으며, 각 공정의 침지용액들은 3회까지 반복 사용하여도 완전히 크롬을 제거할 수 있었다.