• 대한핵의학회지
• /
• 제10권1호
• /
• pp.21-34
• /
• 1976

The diagnosis of iron deficiency rests upon the correct evaluation of body iron stores. Morphological interpretation of blood film and the red cell indices are not reliable and often absent in mild iron deficiency. Serum iron levels and iron-binding capacity are more sensitive indices of iron deficiency, but they are often normal in iron depletion and mild iron deficiency anemia. They are also subject to many variables which may introduce substantial errors and influenced by many pathologic and physiologic states. Examination of the bone marrow aspirate for stainable iron has been regarded as one of the most sensitive and reliable diagnostic method for detecting iron deficiency, but this also has limitations. Thus, there is still need for a more practical, but sensitive and reliable substitute as a screening test of iron deficiency. Pollack et al. (1965) observed that the intestinal absorption of cobalt was raised in iron-deficient rats and Valberg et al. (1969) found that cobalt absorption was elevated in patients with iron deficiency. A direct correlation was demonstrated between the amounts of radioiron and radiocobalt absorbed. Unlike iron, excess cobalt was excreted by the kidney, the percentage of radioactivity in the urine being directly related to the percentage absorbed from the gastrointestinal tract. Recently a test based on the urinary excretion of an oral dose of $^{57}Co$ has been proposed as a method for detecting iron deficiency. To assess the diagnostic value of urinary cobalt excretion test cobaltous chloride labelled with $1{\mu}Ci\;of\;^{58}Co$ was given by mouth and the percentage of the test dose excreted in the urine was measured by a gamma counter. The mean 24 hour urinary cobalt excretion in control subjects with normal iron stores was 6.1% ($1.9{\sim}15.2%$). Cobalt excretion was markedly increased in patients with iron deficiency and excreted more than 29% of the dose. In contrast, patients with anemia due to causes other than iron deficiency excreted less than 27%. Hence, 24 hour urinary cobalt excretion of 27% or less in a patient with anemia suggets that the primary cause of the anemia is not iron deficiency. A value greater than 27% in an anemic subject suggests that the anemia is caused by iron deficiency. The cobalt excretion test is a simple, sensitive and accurate method for the assessment of body iron stores. It may be particularly valuable in the epidemiological studies of iron deficiency and repeated evaluations of the body iron stores.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1100-1106
• /
• 2008

본 연구는 표면에 세포를 부착하는데 있어서, 다양한 기판 표면에 보편적인 플랫폼으로써 적용될 수 있는 세포 부착을 위한 기능성 표면의 제작 기술 및 이를 이용한 세포의 선택적인 고정과 편리한 세포 패터닝의 방법을 보여주었다. 세포 부착에 적합한 기능성 표면의 제작은 산소 플라즈마 처리를 이용한 다양한 기판의(유리, PMMA, PS, PDMS) 표면 활성화 및 상반되는 고분자 전해질의(PAH, PDAC, PSS, PAA) 정전기적 인력을 통한 증착으로 이루어진 다층의 고분자 전해질 층을 통해 제작될 수 있었다. 또한, 고분자 전해질로 증착된 표면 위로 마이크로 몰딩 인 케필러리 방법을 사용하여 PEG 마이크로 구조물을 제작함으로써 세포의 선택적인 고정이 이루어질 수 있었다. 다층의 고분자 전해질로 증착된 표면은 세포와의 강한 정전기적 인력으로 세포 부착에 유리한 표면을 제공하였다. 반면에, 제작된 PEG 마이크로 구조물은 물리적, 생물학적인 장애물의 역할로써 세포의 비 특이적인 흡착을 방지하였다. 세포 부착을 위한 기능성 표면을 제작하는 동안 표면의 특성은 접촉각 측정을 통해 이루어 졌다. 다양한 기판 상에서 개질된 표면은 세포 부착을 위한 적합한 환경의 제공과 함께 세포의 마이크로 패터닝 기술에서 높은 수율의 세포 패터닝을 제공한다. 상기의 제안된 세포 부착을 위한 기능성 표면 제작 기술 방법은 제작 과정이 매우 간단하고, 편리하여 손쉽게 구현이 가능하며, 제작 공정에서 어떠한 해로운 용매도 사용하지 않기 때문에 친환경적이다. 또한, 이를 이용하여 세포를 이용하는 바이오 칩 및 바이오 센서, 세포를 기반으로 하는 시스템 등에서 기본이 되는 기술로 사용될 수 있는 넓은 응용 범위를 갖는다.

• Molecules and Cells
• /
• 제27권4호
• /
• pp.423-428
• /
• 2009

Superoxide dismutases (SODs) constitute the first line of cellular defense against oxidative stress in plants. SODs generally occur in three different forms with Cu/Zn, Fe, or Mn as prosthetic metals. We cloned the full-length cDNA of the Thellungiella halophila Cu/Zn-SOD gene ThCSD using degenerate RT-PCR and rapid amplification of cDNA ends (RACE). Sequence analysis indicated that the ThCSD gene (GenBank accession number EF405867) had an open reading frame of 456 bp. The deduced 152-amino acid polypeptide had a predicted molecular weight of 15.1 kDa, an estimated pI of 5.4, and a putative Cu/Zn-binding site. Recombinant ThCSD protein was expressed in Escherichia coli and assayed for SOD enzymatic activity in a native polyacrylamide gel. The SOD activity of ThCSD was inactivated by potassium cyanide and hydrogen peroxide but not by sodium azide, confirming that ThCSD is a Cu/Zn-SOD. Northern blotting demonstrated that ThCSD is expressed in roots, stems, and leaves. ThCSD mRNA levels increased by about 30-fold when plants were treated with sodium chloride (NaCl), abscisic acid (ABA), and indole-acetic acid (IAA) and by about 50-fold when treated with UVB light. These results indicate that ThCSD is involved in physiological pathways activated by a variety of environmental conditions.

• 대한미생물학회지
• /
• 제21권4호
• /
• pp.447-453
• /
• 1986

To diagnose the typhoid fever rapidly and accurately in clinically suspected patients, the levels of IgG subclass antibody were measured by enzyme-linked immunosorbent assay(ELISA). With symptom, blood culture and agglutination test, tested persons were categorized into 6 groups as typhoid fever, FUO, paratyphi A or B, other bacterial infctions, cancers, and control. ELISA was performed on the polyvinyl chloride plates coated with killed whole cell($10^8\;cell/ml$) of S. typhi 0901W by poly-L-lysine applied as binding substance (and polyvinyl chloride as solid phase). The distribution of the level of IgG subclass antibodies in each group was analyzed and compared with other groups. The results obtained were summarized as follow: 1. The optimal dilution of the sera from patients with typhoid fever was 1:160, and those of the sheep anti-human IgG subclass and the peroxidase conjugated rabbit anti-sheep IgG were 1:4000 and 1:5000, respectively. 2. The absorbance levels of IgG subclass in the sera of typhoid fever patients were as follows; a) IgG1 value is $0.439{\pm}0.110$ b) IgG2 value is $0.416{\pm}0.165$ c) IgG3 value is $0.449{\pm}0.145$ d) IgG4 value is $0.525{\pm}0.154$ IgG subclass levels in the sera of typhoid patients were much higher than in control group and patient with paratyphi A or B as well as other infectious diseases. The sensitivity and the specificity in differential diagnosis of typhoid fever and other febrile diseases were 92% and 79% in the assay of IgG1 respectively, whereas those in the assay of IgG2 were 97% and 72%, respectively (above absorbance 0.3). 3. The absorbance levels of IgG subclass in the serial sera of typhiod fever patients tend to decrease to the level of absorbance 0.3 in 10 months from the onset of illness. 4. The order of absorbance levels of IgG subclass in the serum of each group were typhoid fever, paratyphi A or B, other infectious diseases, control and cancer. 5. For the serodiagnosis of typhoid fever against other febrile diseases, the sensitivity and the specificity in the assay of IgG2 activity were 76% and 93% in absorbance 0.4, respectively. 6. In the distribution of the level of each IgG subclass in the sera of FUO patients which were suspected of typhoid fever, the positive rate was ranged from 36% to 82%. This suggest that more than 50% of FUO patients are caused by S. typhi.

• 약학회지
• /
• 제42권3호
• /
• pp.290-295
• /
• 1998

To optimize the formulation of acetaminophen liquid suppository, the effect of additives on the physicochemical properties of liquid suppository base was investigated. The physi cochemical properties of P 407/P 188 (15/15%) (abbreviated in 15/15) and P 407/P l88 (15/20%) (abbreviated in 15/20) were measured after the addition of following additives; 2.5% acetaminophen as an active ingredient, vehicle components (5% ethanol, 5% propylene glycol, 5% glycerin), preservatives (0.1% sodium benzoate, 0,1% methylparahydroxybenzoate, 0.1% propylparahydroxybenzoate) and 1% of sodium chloride as an ionic strength controlling agent. Poloxamer gel was prepared with three different buffer solutions (pH 1.2, 4.0 and 6.8) and the physicochemical properties, gelation temperature, gel strength and bioadhesive force, were determined. In the results, the effect of additives on the physicochemical properties was dependent on their bonding capacities including hydrogen bonding and cross-linking bonding. Because the hydrogen-bonding capacities of acetaminophen, ethanol and propylene glycol were smaller than that of poloxamer, the binding force of poloxamer gel became weak by their putting in between poloxamer gel. Therefore, the gelation temperature (15/15, $35.7^{\circ}C$ vs 37.0, 39.4 $38.2^{\circ}C$; 15/20, $29.2^{\circ}C$ vs 31.2, 32.0, $30.3^{\circ}C$) increased, and gel strength (15/15, 4.03 see vs 2.72, 2.08, 3.12sec; 15/20, 300g vs 50, 50, 200g) and bioadhesive force (15/15, $6.8{\times}10^2\;dyne/cm^2$ vs 3.2, 6.0, $6.0{\times}10^2\;dyne/cm^2$; 15/20, $97.3{\times}10^2\;dyne/cm^2$ vs 11.1, 89.5, $92.0{\times}10^2\;dyne/cm^2$) decreased. Furthermore, the binding force of poloxamer gel became strong due to the hydrogen-bonding capacities of glycerin and the cross-liking bonding of sodium salt. Then, the gelation temperature (15/15, 35.0, $32.1^{\circ}C$; 15/20, 26.0, $21.0^{\circ}C$) decreased, and gel strength (15/15, 6.51 see, 300g; 15/20, 500, 650g) and bioadhesive force (15/15, 7.2, $81.6{\times}10^2\;dyne/cm^2$; 15/20, 112.3, $309.2{\times}10^2\;dyne/cm^2$) increased. The effect of pH on the physicochemical properties of poloxamer gel was dependent on the ingredients with which the buffer solutions were prepared. Poloxamer gels prepared with pH 1.2 and 4.0 buffer solutions had the increasing gelation temperature (15/15, 37.5, $38.1^{\circ}C$; 15/20, 33.1, $34.0^{\circ}C$) and the decreasing gel strength (15/15, 2.98, 3.81sec; 15/20, 200, 200g) and bioadhesive force (15/15, $7.0{\times}10^2dyne/cm^2$; 15/20, $74.0{\sim}88.1{\times}10^2dyne/cm^2$) owing to HCl. Poloxamer gel prepared with pH 6.8 buffer solutions had the decreasing gelation temperature (15/15, $27.2^{\circ}C$; 15/20, $22.3^{\circ}C$) and the increasing gel strength (15/15, 400g; 15/20, 550g) and bioadhesive force (15/15, $207.0{\times}10^2dyne/cm^2$; 15/20, $215.0{\times}10^2dyne/cm^2$) due to the cross-linking bonding of $NaH_2PO_4\;and\;K_2HPO_4$.

• 대한약리학회지
• /
• 제32권3호
• /
• pp.407-416
• /
• 1996

간독성물질인 $CCl_4$의 대사에서 반응성이 높은 대사중간체의 증가가 P450 2E1의 활성 및 발현증가와 관련된다. YH439는 랫트에서 사염화탄소에 의하여 유발된 간 손상에 보호효과가 탁월하였고, 각종 독성물질에 의하여 발생하는 간염을 억제하며 P450 2E1의 발현을 억제하는 것으로 나타났다. P450 2E1의 발현억제가 YH439의 간장보호작용의 일부기전으로 해석되나 free radical 공격의 제어, 방어과정에 관련된 탐식세포의 역할등 간장독성에 관련된 YH439의 영향 및 관련된 기초연구는 완전히 확립되어 있지 않다. 본 연구에서는 상승적인 화학적 독성에 대한 YH439의 보호효과를 관찰하였다. Retinoyl palmiate (Vit-A)를 전처러하고 YH439를 처리한 rat의 경우 $CCl_4$ 단독투여군에 비하여 혈장 alanine aminotransferase (ALT)활성이 5배로 증가하여 $CCl_4$에 의한 간독성을 현저히 강화시켰으나, YH439와 Vit-A를 동시에 전처리한 rats에 있어서는 Vit-A에 의하여 강화된 독성이 94% 감소하였다. Vit-A에 의한 혈장 ALT 활성 증가는 Kupffer cell 활성을 선택적으로 억제하는 $GdCl_3$의 투여에 의해 완전히 차단되어 YH439가 Kupffer cell 활성억제를 매개로 상승적 간손상에 대하여 보호효과가 있음을 지지한다. Propyl sulfide의 전처치는 $CCl_4$에 의해 유도되는 간독성을 $CCl_4$ 단독투여와 비교했을때 5배 이상 증가시켰으나, Propyl sulfide와 YH439를 병용투여할 경우 propyl sulfide에 의해 강화되는 간독성이 YH439의 투여용량에 의존적으로 감소하였고, propyl sufide와 $CCl_4$에 의한 지질과산화의 증가가 YH439에 의하여 용량의존적으로 억제되는 것으로 나타났다. Propyl sulfide에 의하여 강화된 간독성의 차단은 YH439가 P450 2E1 발현조절을 통하여 간독성을 제어함을 지지한다. 그러나 YH439는 pyridine과 $CCl_4$에 의한 독성을 억제시키지 못하였다. 이는 Pyridine에 의해 유도되는 다른 형의 P450발현이 YH439에 의해 억제되지 못하는 이유로 해석된다. 중금속에 의해 유도되는 간독성에 대한 YH439의 보호효과를 ICR mice에서 관찰하였을 때 $CdCl_2$를 1회 투여할때 ALT와 aspartate aminotransferase (AST)활성이 $5{\sim}6$배 증가하였으나 YH439를 투여한 후 $CdC1_2$를 투여한 동물에 있어서는 투여후 6시간에 AST의 증가가 유의성 있게 억제되었다. 그러나 YH439는 thioacetamide에 의하여 유발된 liver fibrosis에는 개선효과가 없는 것으로 나타났다. 이러한 결과는 YH439가 Kupffer cell 불활성화를 통하여 Vit-A에 의해 유도되는 간독성을 효과적으로 방어하고, YH439에 의한 P450 2E1의 발현억제는 propyl sulfide를 경유하는 간독성 차단과 관계되며, YH439는 중금속으로 유도된 조직독성에 방어효과가 있음을 지지한다.