• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.281-286
• /
• 2000

A series of amorphous polyesters were synthesized from amorphous polyether and sebacoyl chloride. The structure and competition of the obtained aliphatic polyester were confirmed by $^1$H-NMR and FT-IR. The number average molecular weights (M$_{n}$) of the obtained polymer were ranging from 8000 ~ 15000. These polyesters showed no crystallinity and their glass transition temperatures (T$_{g}$) were around -77$^{\circ}C$. For comparison, aliphatic polyesters were also synthesized from poly(ethylene glycol) (PEG) with M$_{n}$ of 200, 400, and 1000. As the M$_{n}$ of PEG increased, the melting point of the obtained polyester increased, and the crystallinity of the obtained polyester increased showing 8.8%, 16.2%, and 46.7%, respectively.ively.y.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.679-684
• /
• 1997

The major constituents in spent FCC catalysts are Si, Al, Fe, Ti, alkali metals and some others. The spent catalyst is also composed small amounts of rare metals such as Ce, Nd, Ni and V. The selective adsorption and concentration of Ce and Nd from the leaching solution of spent FCC catalysts with sulfuric acid($0.25mol/dm^3$) were carried out by the column method with a chelate resin having a functional group of aminophosphoric acid type. Ce and Nd were separated from eluate liquor containing Al, Nd and V by the precipitation process with oxalic acid. Vanadium is purified from chloride ion coexistance by solvent extraction, employing tri-n-octyl phosphine oxide as extractant with Al in the raffinate solution. Rare metals with the purity of 99 percent were obtained from the spent FCC catalyst.

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.785-791
• /
• 2006

The purpose of this study is to clarify the effect of the monomer ratio on properties of the polymer-modified mortars based on styrene and butyl acrylate latexes, and to obtain basic data necessary to develop appropriate latexes for cement modifiers. This paper deals with the effects of monomer ratio on the typical properties of the polymer-modified mortars with styrene and butyl acrylate latexes. The polymer-modified mortars using the styrene and butyl acrylate latexes polymerized with various monomer ratios are prepared with different polymer-cement ratios, and tested for the particle size of polymer latexes, air contents, water-cement ratios, flexural and compressive strengths, water absorption, and chloride-ion penetration. From the test results, the polymer-modified mortars using styrene and butyl acrylate latexes with the mix proportions of synthesis having monomer ratios of 50:50 to 60:40 for the appropriate mix proportions can be recommended for practical applications. Their basic properties are greatly affected by the polymer-cement ratio rather than the monomer ratio, and are improved over un-modified mortar.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.475-482
• /
• 2007

The property and applicability of the organic-inorganic synthesized penetrating and reinforcing agent, which is developed in order to improve durability of concrete structures and prevent deterioration that may occur as service years increased, are researched with experimental works. TEOS (tetra-ethoxyorthosilicate) and acrylate monomer are synthesized by the solution polycondensation method in order to formulate silicate with sol-gel process and improve durability of concrete. Additional substances such as isobutyl-orthosilicate is supplemented in order to improve the performance of the agent. After the developed organic-inorganic penetrating reinforcing agent penetrates, a flexible impact alleviating layer is formed with organic monomers as well as the agent strengthens concrete by filling up the internal pore of concrete with stable compounds after penetration. Penetrating and reinforcing agent can be applied as an effective life management method because it makes concrete more durable against the aging factors, such as chloride ion, carbonation, freezing-thawing, and compound aging.

• Journal of the Korea Concrete Institute
• /
• v.26 no.5
• /
• pp.607-614
• /
• 2014

The purpose of this dissertation was to investigate the effect of mineral admixtures, such as fly ash, blast furnace slag powder, meta kaolin and silica fume, on the basic properties and durability of crushed sand shotcrete, selecting a series of shotcrete mixtures with a variable admixture. Compressive strength increased as the content of mineral admixtures increased, specially it was the most effective when using meta kaolin both at sample specimen and core after shotcreting. Rapid chloride ion permeability test and sulfuric acid resistance test showed that both durability increased as the substitute rate of mineral admixture increased. In air void analysis with image analysis, the targeted the spacing factor and specific surface were not satisfied because air-entrained agent was not used.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.345-352
• /
• 2017

Heavy weight concrete can be used in marine concrete structure to improve resistance against high wave energy. However, heavy weight aggregate, which is an indispensable material for heavy weight concrete, is difficult to be supplied in large quantities because its use is limited due to its high cost. In this work, the applicability of heavy weight by-products, copper and 3 month aged steelmaking slags, were evaluated as sources of heavy weight aggregate for marine concrete structures. Experimental results showed that copper slag was found to be a stable material for marine concrete structure. However, 3 month aged steelmaking slag showed significant expansion by $80^{\circ}$ water immersion test and ASTM C 1260 test. In addition, depth of chloride ion penetration in concrete was higher at which steelmaking slags were located. It was associated with porosity of steelmaking slag, and for this reason, steelmaking slag was not found to be suitable for marine concrete structure.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.40.1-43
• /
• 2002

The purpose of this study was to evaluate a new sampling and analytical method for the determination of hexavalent chromium, Cr(VI) in mist from field plating operation. The Procedures of this new method (Shin & Paik's Method) are as the following: Airborne hexavalent chromium is collected on polyvinyl chloride (PVC) filter according to the National Institute for Occupational Safety and Health (NIOSH) Method 7600, and the filter sample is placed in a screw-capped vial and soaked with 2％ NaOH/3％ Na₂CO₃ solution immediately after sampling. The Cr(VI) sample is analyzed by ion chromatography/visible spectrophotometry (IC/VS) according to the U.S. Environmental Protection Agency (EPA) Method 218.6. The airborne Cr(VI) concentrations measured by this method were compared with those determined by three reference methods: One (NIOSH/EPA Method) consisted of sampling airborne Cr(VI) on PVC filters and storing the sample filters in screw-capped vials according to the NIOSH method, and analyzing Cr(VI) in samples using IC/VS according to the EPA method. The second method (Impinger Method/NaHCO₃) consisted of absorbing airborne Cr(VI) into 0.02 MN/sub a/Hco₃ solution in midget impinger, and analyzing the Cr(VI) in samples using IC/VS. The third method was the OSHA Method Id-215. Using these four different methods, four replicates of air samples were collected at an electroplating process and analyzed simultaneously. Two-way ANOVA and Paired t-test were used to test difference among values determined by the methods. There was no significant difference and a strong correlation (r/sup 2/=0.99) between Cr(VI) concentrations measured by the shin & Paik's Method and an impinger method (p＞0.05). However, Cr(VI) concentrations determined by Shin & Paik's Method were Significantly different form those by the NIOSH/EPA Method (p＜0.05) or the OSHA method (p＜0.05). The Cr(VI) concentrations of Shin & Paik's Method were Significantly higher than those of the NIOSH/EPA Method or the OSHA method. We concluded that the Shin & Paik's Method could prevent Cr(VI) losses caused by reduction and give more reliable results of airborne Cr(VI) concentrations in work environments.

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.859-864
• /
• 1996

The rhamnan sulfat extracted from green algae seaweed, Monostroma nitidum was characterized on sugars, sulfate compositions and molecular structure. Rhamnan sulfate was extracted with boiling water, and purified with two steps of cetylpyridinium chloride and ion exchange chromatography. The yield of crude rhamnan sulfate was about 2% from raw material. Rhamnan sulfate fraction, F-4 was composed of 30% rhamnose, 0.9% arabinose, 2.5% xylose, 2% glucose and 32.6% sulfate. Rhamnan sulfate F-4-3 obtained from F-4 fraction was composed of 36.8% rhamnose, 3.6% xylose, 2.7% glucose, 1.4% galactose and 30.8% sulfate. The molecular weight of F-4-3 fraction was estimated as 10,000-10,300 dalton with Sephacryl S-200 gel filtration chromatography.

• Journal of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.154-162
• /
• 1973

The rates and activation parameters for the halide $(Cl^{-}, Br^{-}, I^{-})$TeX> exchange reactions of substituted benzenesulfonyl-chloride, $XC_6H_4SO_2Cl$(X:p-MeO, H, p-Cl, p-Br, p-NO$_2l$) in dry acetone at two temperatures have been determined. It was found that the ion-pair of metal halide,$M^{+}X^{-}$, have negligible reactivity compared to free halide ions. It was also found that the nucleophilic order is $Cl^{-}>Br^{-}>I^{-}$for electron-donating substituent, and $Cl^{-}>I^{-}>Br^{-}$ for electron-withdrawing substituents. These results and convex nature of the Hammett plot are interpreted in the light of simple $S_N2$mechanism with the bond breaking becoming important for compounds with the electron withdra-wing substituents.

• Journal of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.17-24
• /
• 1963

The fundamental investigations of surface properties of scheelite were made by electrophoretic mobility adsorption and contact angle measurements, and results have been correlated with its floatability obtained by Hallimond tube flotation test. The role of the interfacial electrical condition on the adsorption of collectors on mineral surfaces is discussed with the flotation of scheelite. From electrokinetic measurements made on scheelite, $Ca^{++}$ and $WO_4^{--}$ are identified to act as potential-determining ions, thus controlling the surface properties on this mineral. Therefore, at the fixed pH, the scheelite surface become to be less negatively charged with increasing $Ca^{++}$ concentration and more negatively charged with increasing $WO_4^{--}$ concentration in the pulp. Adsorption of collectors then depends strongly on the concentration of $Ca^{++}$ or $WO_4^{--}$ in the solution; anionic collectors are adsorbed on less negatively charged surfaces and cationic collectors on more negatively charged surfaces, which in turn defines the effective flotation range with respective collectors for this mineral.