• 한국수산과학회지
• /
• 제52권6호
• /
• pp.702-708
• /
• 2019

The range resolution of echo sounders can be improved by enhancing the transducer bandwidth. We designed a bandpass matching network for expanding the bandwidth of a transducer by scaling in both impedance and frequency after transforming a lowpass network into a bandpass configuration for a third-order Bessel filter. We measured the effect of the Bessel matching network for a 50 kHz sandwich type transducer on the transmitting voltage response (TVR), receiving sensitivity (SRT) and figure of merit (FOM), using a chirp echo sounder system. Both the simulation and experimental results indicated that the transducer with a bandpass matching network was capable of producing a symmetrical acoustic output over a wider bandwidth (8.25 kHz) than was the transducer without a matching network (3.75 kHz). By implementing the Bessel matching network, we achieved a 120% bandwidth enhancement.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권9호
• /
• pp.521-530
• /
• 2005

In this paper, a new high resolution reflectometry scheme, time-frequency domain reflectometry(TFDR), isproposed to detect and estimate a fault in a transmission line. Traditional reflectometry methodologies have been achieved either in the time domain or in the frequency domain only. However, the TFDR can jump over the performance limits of the traditional reflectometry methodologies because the acquired signal is analyzed in time and frequency domain simultaneously. In the TFDR, the new reference signal and the novel TFDR algorithm are proposed for analyzing the acquired signal in the time-frequency domain. Because the reference signal of Gaussian envelop chirp signal is localized in the time and frequency domain simultaneously, it is suitable to the analysis in the time-frequency domain. In the proposed TFDR algorithm, the time-frequency distribution function and the normalized time-frequency cross correlation function are used to detect and estimate a fault in a transmission line. That algorithm is verified for real-world coaxial cables which are typical transmission line with different types of faults by the TFDR system composed of real instruments. The performance of the TFDR methodology is compared with that o( the commercial time domain reflectomeoy(TDR) experiments, so that concludes the TFDR methodology can detect and estimate the fault with smaller error than TDR methodology.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.443-446
• /
• 2005

This paper presents the results of the design and implementation of the airborne pulse doppler radar signal processor using high multi-DSP for the multi-function radar capability such as short-range, midium-range, and long-range depending on the mission of the vehicle. Particularly, the radar signal processor is developed using two DSP boards in parallel for the various radar signal processing algorithm. The key algorithms include LFM chirp waveform-based pulse compression, MTI clutter filter, MTD processor, adaptive CFAR, and clutter map. Especially airborne moving clutter Doppler spectrum compensation algorithm such as TACCAR is implemented for the multi-mode airborne radar system. The test results shows the good Doppler spectral separation for the clutter and the moving target in the flight test environment using helicopter

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.23-28
• /
• 2005

An airborne radar is an essential aviation electronic system of the helicopter to perform various missions in all-weather environments. This paper presents the results of the design and implementation of the airborne pulse doppler radar signal processor using high multi-DSP for the multi-function radar capability such as short-range, midium-range, and long-range depending on the mission of the vehicle. Particularly, the radar signal processor is developed using two DSP boards in parallel for the various radar signal processing algorithm. The key algorithms include LFM chirp waveform-based pulse compression, MTI clutter filter, MTD processor, adaptive CFAR, and clutter map. Especially airborne moving clutter Doppler spectrum compensation algorithm such as TACCAR is implemented for the multi-mode airborne radar system. The test results shows the good Doppler spectral separation for the clutter and the moving target in the flight test environment using helicopter.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.183-189
• /
• 2003

The study of the automotive noise reduction has been concentrated on the reduction of the automotive engine noise because the engine noise is the major cause of automotive noise. However, many studies of automotive engine noise led to the interest of the noise reduction of the exhaust and intake system. Recently, the active control method is used to reduce the noise of an automotive exhaust and intake system. It is mostly used the LMS(Least-Mean-Square) algorithm as an algorithm of active control because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, Filtered-X LMS (FXLMS) algorithm is applied to an Active Noise Control system. However, the convergence performance of LMS algorithm went bad when the FXLMS algorithm was applied to an active control of the induction noise under rapidly accelerated driving conditions. So, in order to solve this problem, the modified FXLMS algorithm is proposed. In this study, the improvement of the control performance using the modified FXLMS algorithm under rapidly and suddenly accelerated driving conditions was identified. Also, the performance of an active control using the LMS algorithm under rapidly accelerated driving conditions was evaluated through the theoretical derivation using a chirp signal to have similar characteristics with the induction noise signal.

• 한국수산과학회지
• /
• 제48권2호
• /
• pp.233-243
• /
• 2015

Controlled broadband acoustic scattering laboratory experiments were conducted using a linear chirp signal (95-220 kHz), and x-ray images of live and model fish with an artificial swim bladder were analyzed to investigate the changes in orientation and frequency dependence of target strength (TS) due to morphological differences in fish swim bladders. The broadband echoes from live and model fish were measured over an orientation angle range of ${\pm}45^{\circ}$ in the dorsal plane and in approximately $1^{\circ}$ increments. The location of nulls in the simulated echo response of the SINC [sinc function] model was overlaid on the TS map, showing the orientation and frequency dependence of fish TS, and they matched very well. It was possible to infer the equivalent fish scattering size (or swim bladder) using the null spacing in the experimentally obtained broadband TS map. Good agreement was observed for inferring the equivalent scattering size between the SINC model and the broadband echoes measured for the three fish species (black scraper Thamnaconus modestus; goldeye rockfish Sebastes thompsoni; and whitesaddled reef fish Chromis notatus). Some results of this inference are discussed.

• 정보처리학회논문지C
• /
• 제19C권4호
• /
• pp.239-246
• /
• 2012

WPAN에서 위치추정은 UWB를 사용한 선택적 기능으로 규격화되어 있다. 그러나 실제로는 위치추정 기능이 제공되고, 가격이 저렴하고 개발환경이 제공되고 있는 CSS(Chirp Spread Spectrum) 소자를 주로 사용하고 있다. CSS 소자는 2.4GHz 주파수 대역을 사용하고, 표본화 클럭 주파수가 UWB에 비하여 낮고, 시각정보추출 정확도가 떨어지므로 거리추정 오차가 크게 나타난다. 거리추정 오차는 SDS-TWR 방식을 사용하여 10m 거리에서 30cm～1m 정도로 알려지고 있으며, ($10m{\times}10m$) 환경에서 위치추정 오차는 1～2m 정도로 알려지고 있다. 따라서 보다 개선된 성능이 요구되는 응용을 위해서는 거리추정 이후의 후처리 알고리즘 개발이 중요하게 되었다. 본 논문에서는 고정노드의 주파수편이를 확장 Kalman 필터에 적용하는 방식을 연구하였으며, 각 고정노드의 주파수 편이를 공통의 상태변수와 각 고정노드별 주파수편이 상수로 구분하고 이를 통합하는 주파수편이 보상 확장 Kalman 필터 방식을 제안하였다. 제안된 방식은 CSS WPAN 노드를 사용하여 10cm 이하로 매우 정확한 위치오차 범위 내에서도 이동노드의 위치를 추정할 수 있음을 확인하였다.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.327-332
• /
• 2017

IoT 기술이 발전함에 따라 사용자의 이동성 및 정체성을 확인하기 위한 위치 기반 서비스(Location Based Service)에 대한 수요가 증가되고 있다. 초기의 LBS 시스템은 GPS(Global Positioning System) 위성에서 보내오는 신호의 위상을 측정하거나 반송파 신호의 코드를 추적하여 위성까지의 거리를 측정함으로써 위치정보를 확인하는 기술이 주로 사용되었다. 그러나 GPS위성을 사용하는 방식은 실내에서는 위성 신호의 수신이 어렵기 때문에 그 효용성이 떨어진다. 따라서 실내 환경에서 활용할 수 있는 위치인식기술을 위해 UWB, RFID, Zigbee 등과 같은 무선 통신 시스템에 관한 연구가 활발히 진행되고 있다. 이에 본 논문에서는 저전력 기반의 위치 인식을 위한 IEEE 802.15.4a의 표준을 활용하여 CSS를 위한 2.45GHz 대역과 UWB를 위한 3.1~10.6GHz대역 및 250-750 MHz대역의 주파수 대역을 포함을 하는 LBS 시스템을 설계하였다. 그 결과로서 2.45GHz ISM RF 트랜시버와 Ranging 기능을 하드웨어로 구현하여 0dBm의 출력파워를 갖음을 확인하였다.

• 한국항행학회논문지
• /
• 제7권1호
• /
• pp.38-50
• /
• 2003

본 논문에서는 도선상에서 발생하는 결함 위치와 이상 유무를 감지하는 새로운 고분해능 반사측정법인 시간-주파수 영역반사측정법 (TFDR, Time-Frequency Domain Reflectometry)을 제안하였다. 고전적인 반사측정법들은 단지 시간 또는 주파수의 한 영역에서 분석되어져 왔으나, 본 논문에서 제시한 TFDR은 도선의 결함 위치와 이상 유무를 발견하기 위해 과도신호의 시간과 주파수 영역의 정보를 동시에 이용할 수 있는 시간-주파수 분석기법으로 특성화하였다. TFDR의 기준신호 설계는 측정 케이블의 물리적 성질들을 고려하여 주파수 밴드를 결정하며, 도선의 결함감지와 추정은 시간-주파수 상호상관관계 함수에 의해 이루어진다. TFDR 시스템을 이용하여 여러 결함 상태를 가진 실제 coaxial cable (RG-142, RG-400)에 대해 실험하였고 정확성을 입증하기 위해 TDR (Time Domain Reflectometry) 장비와 성능을 비교하였다. 본 논문에서는 TFDR이 TDR보다 작은 오차로 결함을 찾아냄을 나타내고 있으며, 측정된 정확도는 TFDR의 오차율이 0.5% 이하로 TDR (54750A/54754A) 장비보다 성능이 월등히 우수하다는 것을 알 수 있다.