• Journal of architectural history
• /
• v.31 no.6
• /
• pp.59-68
• /
• 2022

This paper is an architectural historical study on Chimi of Hwangnyongsa Temple. In this research, the shape and cross-section of the chimi are reviewed. The results of the study are as follows. The chimi is a form in which the head part facing the maru is omitted, and the upper and lower body are separated. The upper and lower bonds are assembled into a two types of joint throughout the side of the torso, and then bound with an iron strap. Because of the absence of ridge line in the front, and the narrow curved surface which makes the side plate close to the plane, the entire cross-section is triangular, and the rear plate maintains the shape of the chimi. The naerimmaru connected to the side of the chimi has a slope, so it is clear that the chimi was used on the woojingak-jibung(hipped-roof), and the wing part and back of the chimi are erected on the side roof. The height of the yongmaru and chunyeomaru is about the same and the roofing tiles of those are in contact. The roofing tiles of chunyemaru should be cut to fit the angle of the contacting part. The maru is 30 stories high of roofing tiles as a result of the on-board survey. Based on reference on the shape and timing of the production of chimi, the height of chimi, and the maru is believed to have been built before the Unified Silla Period and used in buildings with at least seven-kan frontage. Buildings corresponding to these construction conditions can be seen as Central hall and East hall in Hwangnyongsa temple.

• Journal of architectural history
• /
• v.26 no.5
• /
• pp.19-26
• /
• 2017

This paper aimed to identify the architectural characteristics of the chimi excavated from ancient ruins, especially middle gate remains of Bunhwangsa Temple in the Unified Silla period. Middle gate had planned $3{\times}2$ with 295mm measuring unit and gabled building. Detailed study of the shape of chimi of the middle gate restored by related field experts reveals as follows. 1) Height of chimi is 4.5(130.6cm) of Tang's system of measurement classified as large one. 2) The front and back side square hole is made for transverse timber placement. 3) Position of chimi is not the end of the ridge of roof, it moved toward the center. 4) Construction method of chimi is structured with smaller beam and center column. 5) Width and height of the ridge is less than 38cm and 54cm to be approximately, Width and height of the gabled ridge is less than 38cm and 50cm. 6) This chimi is considered to be very unique when compared to existing ancient restored chimis, it is designed to be advantageous to the chimi construction.

• Conservation Science in Museum
• /
• v.27
• /
• pp.1-22
• /
• 2022

A chimi(a roof ridge decoration) excavated from the Busosan Temple Site in Buyeo was restored in 1978 at the Buyeo Museum. The gypsum restoration material had deteriorated over time and part of it was seriously damaged and unable to bear the weight of the chimi. The chimi features traces of emergency treatment revealing that the inside of the body and some portions of the tail were reinforced several times using epoxy resin. A condition survey performed in preparation for its transfer for an exhibition found the lower body and wings of the chimi to be highly vulnerable and it was determined that the chimi needed further restoration. The dismantling of the chimi for restoration revealed several elements that provide clues to the production techniques applied by its makers, so they were subjected to inspection. This study explores the production techniques used in the chimi from the Busosan Temple Site that were revealed during the process of dismantling it for restoration. The chimi was inspected using 3D scanning and its rigid vertical shape was restored to a natural form based on the production techniques identified during the dismantling process. The existing restoration material was replaced to improve durability. 3D printed elements were produced based on 3D modelling and were joined to the original chimi to correct its shape and fill in the missing parts, restoring the chimi to its original appearance.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.217-225
• /
• 2019

The chimi(ridge-end tile) of Wangheungsa temple is the oldest in our country. The upper part of the chimi was excavated from the southern side of Wangheungsa temple and the lower part from the northern side. These parts are considered to be portions of the same chimi, because they are similar in shape and are excavated from two sides of the same temple structure. However, the original shape of the chimi cannot be determined owing to substantial deterioration. Hence, in this study, replicas of the deteriorated chimi portions of Wangheungsa temple were fabricated by employing 3D scanning technology and the computer numerical control machining method. While observing the bending phenomenon of the chimi, the proposed model was warped realistically on the basis of the bending direction of the actual chimi. Consequently, the restoration process was modified several times. The results indicated that no gaps can be found between the upper and lower parts, and the corresponding patterns connect naturally. Furthermore, the proposed method is contactless, safe, operable, reproducible, and appropriate for restoration of artifacts. Additionally, the modeling data is semi-permanent. Hence, if modelling data is appropriately applied as per the characteristics of artifacts, it can be utilized in various fields such as virtual exhibitions, hands-on exhibitions, cultural heritage restoration, and production of teaching aids and souvenirs.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.518-527
• /
• 2019

This investion studies the manufacturing techniques of chimi(ridge-end roof tiles based on the) fragments excavated from the Wonju Beopcheonsa temple site(Historic site No. 466) and aids in the conservation of the fragments. The results of the investigation are categorized into the production of the body parts, the wing and the feather attachment, the production of the decorative parts, the scratches in the upper and lower part, the perforations connecting the upper and lower parts, and the formative features(bending phenomenon). The procedures in the conservation treatment of the chimi was performed in a sequential order beginning with a preliminary examination, followed by the removal of foreign substances, coating, joining and restoration, and color retouching. A three-dimensional scanning data was employed to restore the missing parts after adhesion to determine the location, size, and angle of the original shape. The restored chimi measures 118 cm in height and weighs 121 kg, which makes it the fifth largest in size among any chimi(including restored) in Korea. We expect that the pointed feathers will make the chimi from the Beopcheonsa temple site a rare reference as no specimens with these features have been found in Korea until now.

• Preventive Nutrition and Food Science
• /
• v.1 no.2
• /
• pp.159-167
• /
• 1996

Effect of covering various levels(0, 1, 3, 5 and 7% per Chinese radish weight) of bamboo(Pseudosasa japonica Makino) leaves on the surface of Dongchimi was studied in the course of fermenting at 1$0^{\circ}C$ up to 75 days. Physicochemical, microbiogical, and sensory characteristics of Dongchimi were analyzed at regular intervals of 5 to 7 days during fermentation. Both the degree of pH drop from the initial 6.47~6.54and increase total acid content from the initial 0.004%, with the accumulation of organic acids tended to be more gradual depending upon the amounts of bamboo leaves covered. The increases of total solid content and turbidity were also suppressed in similar patterns, notably after 13 days of fermentation. The growth of total bacteria(1.5$\times$10$^4$cfu/ml, initial)was partly inhibited while that of lactic acid bacteria(1.8$\times$10$^4$cfu/ml, initial)was favorably encouraged by the presence of bamboo leaves. As a result of sensory evaluation, Dong-chimi covered with 1 and 3% bamboo leaves on showed the higher scores significantly(p<0.05, p<0.01, p<0.001) in overall acceptability till 39 days. But after 61 days, those covered with 3 and 5% bamboo leaves were rather preferable than any other one.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.3
• /
• pp.35-45
• /
• 2021

Digestate or slurry produced from anaerobic digestion is mostly applied to crop lands for its disposal and recovering nutrients. However, minimizing nitrogen losses following field application of the digestate is important for maximizing the plant's nitrogen uptake and reducing environmental concerns. This study was conducted to assess the effects of three different biogas digestate application techniques (sawdust mixed with digestate (SSD), the hole application method (HA), and digestate injected in the soil (SD)) on nitrate leaching potential in the soil. A pot laboratory experiment was conducted at room temperature of 25 ± 2 ℃ for 107 days. The experimental results showed that sawdust application method turned out to be appropriate for quick immobilization of surplus N in the form of microbial biomass N, reflecting its lower total nitrogen and NH₄-N contents and low pH. The NH₄-N and total nitrogen fate in the soil fertilized with manure showed no statistically significant (p > 0.05) differences between the different methods applied during the incubation time under room temperature. In contrast, NO₃-N concentration indicates significant reduction in sawdust treatment (p < 0.05) compared to the control and other application methods. However, the soil sawdust mixed with digestate was more effective than the other methods, because of the cumulative labile carbon contents of the amendment, which implies soil net N immobilization.

• Journal of architectural history
• /
• v.29 no.2
• /
• pp.75-88
• /
• 2020

There are stone sculptures diversely shaped in several parts of Gyeongbokgung. Geunjeongjeon is a place where the stone sculptures are intensively placed among the various palace buildings of Gyeongbokgung, and it is more important because it contains the phases of the age of the dynasty and the symbolism of governing philosophy. What can be seen in the structure of auspicious animal sculptures is based on the form of instinctive thought that the heavenly and human order systems are in an organic correspondence with each other, especially with regard to astronomical events such as Samwon Sasin 12jisin 28su. The parts that have been interpreted only in Sasin and 12jisin in the interpretations such as wild dogs, Gyoryong, camels, wolves, and apes were able to clarify the contents by revealing the form of 28su. In particular, as Beopsu Ssangbeopsu at the corner may be related to the guardian deity who governs water, called Yimun, Chimi, and Chimun, it is one of Bibo's ways to protect the palace that was vulnerable to fire. In addition, the shape of the existing 28su placed Dambi, but Ha Woldae at the Geunjeongjeon was assumed to have a camel statue and a planned arrangement of double meaning with the Bibo form of Pungsu Sasinsa, and it is also a feature of the arrangement of Woldae at the Geunjeongjeon. The actual composition of auspicious animals at the Nambogye of Geunjeongjeon was in the order of Haechi, wild dogs, horses and Jujak, and the contents of "Gyeongbokgung Construction Daily Record" were in the order of Haechi, horses, wild dogs, and Jujak. As to different composition layouts, based on the contents of the "Gyeongbok palace Construction Daily Record", the composition of Samjae Cheonjiin (天地人) was interpreted differently from the conventional interpretation of the arrangement of Woldae. All of these forms are associated with defense systems in the four directions and have become animal representations of each direction. The auspicious animal statues placed on the railing of Geunjeongjeon Woldae can be seen as reflected in a single building with the three dimensional personality that includes Pungsu's Bibo personality with the symbolic meaning that reveals the centrality as Jeong Jeon, the nation's best politics let alone the ideological system of the ancient astronomical of the East called Men Heaven Unity.

• Journal of Forest and Environmental Science
• /
• v.38 no.3
• /
• pp.184-194
• /
• 2022

Triplochiton scleroxylon K. Schum is the plant species most affected by logging activities in the East Region of Cameroon due to its market value. This logging has impacted the ecological niche of the fern plant for which limited research has been done. The aim of this study is to contribute towards improving knowledge of fern richness and biomass on T. scleroxylon within the Central African sub-region. Fern data collection was done on 20 felled/harvested T. scleroxylon where, in addition to fern inventory, fern biomass was collected by the destructive method. The diameter and height of T. scleroxylon measured were used as explanatory variables in allometric equations for fern biomass estimation. Fern inventory was characterized using diversity index. Eight fern species were recorded on T. scleroxylon (≈5 species/T. scleroxylon). The minimum diameter where fern could be found is 59.4 cm. The average fern biomass found was 23.62 kg/T. scleroxylon. Pearson correlation coefficient showed a positive correlation (r>0.55) between fern biomass and T. scleroxylon diameter. For allometric equation, the logarithmic model improved better the adjustment than the non-logarithmic model. However, the quality of the adjustment is improved more when only the diameter is considered as an explanatory variable. Fern biomass is estimated to 90.08 kg/ha^-1 with 76.02 kg/ha^-1 being lost due to T. scleroxylon exploitation in the study area. This study is a contribution towards increasing knowledge of fern diversity specific to T. scleroxylon, and also fern biomass contribution to climate change mitigation and the potential carbon loss due to T. scleroxylon exploitation.