• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.120-124
• /
• 2007

Helicopters and rotary-wing vehicles encounter a wide variety of complex aerodynamic phenomena and these phenomena present substantial challenges for computational fluid dynamics(CFD) models. This investigation presents the rotor aerodynamic analysis items for the helicopter development and variety aerodynamic analysis methods to provide the better solution to researchers and helicopter developers between aerodynamic problems and numerical aerodynamic analysis methods. The numerical methods to make an analysis of helicopter rotor are as below - CFD Modelling : actuator disk model, BET model, fully rotor model,... - Grid : sliding mesh, chimera mesh / structure mesh, unstructure mesh,... - etc. : panel method periodic boundary, quasi-steady simulation, incompressible,... The choice of CFD methodology and the numerical resolution for the overall problem have been driven mostly by available computer speed and memory at any point in time. The combination of the knowledge of aerodynamic analysis items, available computing power and choice of CFD methods now allows the solution of a number of important rotorcraft aerodynamics design problems.

• Journal of Ship and Ocean Technology
• /
• 제8권1호
• /
• pp.10-30
• /
• 2004

High-fidelity RANS simulations are presented for a ducted marine propulsor, including verification ＆ validation (V＆V) using available experimental fluid dynamics (EFD) data. CFDSHIP-IOWA is used with $\textsc{k}-\omega$ turbulence model and extensions for relative rotating coordinate system and Chimera overset grids. The mesh interpolation code PEGASUS is used for the exchange of the flow information between the overset grids. Intervals V＆V for thrust, torque, and profile averaged radial velocity just downstream of rotor tip are reasonable in comparison with previous results. Flow pattern displays interaction and merging of tip-leakage and trailing edge vortices. In interaction region, multiple peaks and vorticity are smaller, whereas in merging region, better agreement with EFD. Tip-leakage vortex core position, size, circulation, and cavitation patterns for $\sigma=5$ also show a good agreement with EFD, although vortex core size is larger and circulation in interaction region is smaller.

• 한국항공우주학회지
• /
• 제34권2호
• /
• pp.17-25
• /
• 2006

본 연구에서는 2차원 비정렬 중첩격자계를 이용한 서로 겹쳐진 물체간의 상대운동 해석기법을 개발하였다. 물체들이 교차되는 교차점에서 가장 가까운 거리에 있는 각 격자계의 물체 경계면에 위치한 격자점들을 교차점으로 이동시키고, 이 교차점을 기준으로 계산영역에 포함되는 격자와 계산에서 제외되는 격자가 구분되도록 하였다. 비정상 유동의 계산을 위해 계산에서 제외되는 비활성 격자점에 적절한 유동값을 부여하여, 상대운동이 진행됨에 따라 새롭게 활성 격자점으로 분류될 때 이전 시간에서의 유동값으로 이용될 수 있도록 하였다. 해석기법의 검증을 위해 단순플랩의 진동에 따른 에어포일 주위의 유동을 해석하여 타 연구자의 해석결과와 비교하였고, NACA0012 에어포일의 내부에서 사출되는 발사체의 운동에 대하여 해석을 수행하였다.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.405-412
• /
• 2017

In the present study, two phase flows around a projectile vertically launched from an underwater platform have been numerically investigated by using a three dimensional multi-phase RANS flow solver based on pseudo-compressibility and a homogeneous mixture model on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom(6DOF) equations of motion with Euler angles and a chimera technique. The propulsive power of the projectile was modeled as the fluid force acting on the lower surface of the body by the compressed air emitted from the platform. Qualitative analysis was conducted for the time history of vapor volume fraction distributions. Uncorking pressure around the projectile and platform was analyzed to predict impact force acting on the surfaces. The results of 6DOF analysis presented similar tendency with the surficial pressure distributions.

• 한국항공우주학회지
• /
• 제34권4호
• /
• pp.1-10
• /
• 2006

비정상 공기역학적 해석코드와 동역학적 해석 프로그램이 연계된 코드를 이용하여 단분리 시스템의 유동해석과 함께 분리과정의 거동을 해석하였다. 본 연구는 일단 추진 모터를 가진 장거리 미사일 단분리과정 만을 연구대상으로 하였다. 연구의 목적은 이러한 단분리 시스템의 안전성과 신뢰도를 검증하기 위해 단분리 과정에 대한 비정상 동역학 시뮬레이션을 수행하였다. 특히 비행 중 받음각 요란에 의한 자유흐름 조건의 변화에 대해서도 시뮬레이션을 수행하여, 받음각 요란이 단분리의 안정성과 신뢰도에 미치는 영향을 알아보고자 하였다. 해석코드는 병렬화 된 중첩 정열격자계를 사용하여 비정상 초음속 오일러 코드로 공기역학적 해석을 한 후, 이 결과를 6자유도를 갖는 운동방정식의 입력 데이터로 하여 동역학적 시물레이션을 수행하였다.

• 한국군사과학기술학회지
• /
• 제22권4호
• /
• pp.517-526
• /
• 2019

In the present study, unsteady flows around a projectile ejected from an aircraft platform have been numerically investigated by using a three dimensional compressible RANS flow solver based on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom(6DOF) equations of motion with Euler angles and a chimera technique. Initial behavior of the projectile for varying conditions, such as roll and pitch-yaw command on the control surface of the projectile, flight Mach number, and platform pitch angle, was investigated. The ejection stability of the projectile was degraded as Mach number increases. In the transonic condition, the initial behavior of the projectile was found to be unstable as increase of platform pitch angle. By applying the command to control surfaces of the projectile, initial stability was highly enhanced. It was concluded that the proposed simulation data are useful for estimating the ejection behavior of a projectile in design phase.