• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.1
• /
• pp.25-32
• /
• 2001

Baffles have been used in cryopumps to prevent 300 K thermal radiation from reaching freely cryopanels whose temperature must be kept steadily below certain levels(4 K, 20 K or something) depending on the gas to be pumped. There are two conflicting requirements in designing a baffle such that the transmission of particles(gas molecules) should be maximized, while that of the thermal radiation(photons) minimized. The transmission probability of gas molecules or photons through chevron type baffles, influenced by the detailed geometry of blades, the reflection mode, and the absorption property of the surface, was analyzed parametrically. The effects of geometrical discrepancy between the fabricated baffle and the designed one, resulting in unexpected deterioration in the performance of the baffle, were also investigated by taking into account the gaps(or overlaps) between the baffle blades and the asymmetry in the blade arms.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.9
• /
• pp.676-682
• /
• 2008

Numerical analysis was carried out to examine the heat transfer and pressure drop characteristics of plate heat exchangers for absorption application using Computational Fluid Dynamics(CFD) technique. A commercial CFD software package, FLUENT was used to predict the characteristics of heat transfer, pressure drop and flow distribution within plate heat exchangers. In this paper, a welded plate heat exchanger with the plate of chevron embossing type was numerically analyzed by controlling mass flow rate, solution concentration, and inlet temperatures. The working fluid is $H_2O$/LiBr solution with the LiBr concentration of 50-60% in mass. The numerical simulation shows reasonably good agreement with the experimental results. Also, the numerical results show that plate of the chevron shape gives better results than plate of the elliptical shape from the view points of heat transfer and pressure drop. These results provide a guideline to apply the welded PHE for the solution heat exchanger of absorption systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5676-5683
• /
• 2012

In this study, numerical analysis was performed on three shapes of heat transfer plates (chevron, wave and dimple type), which are currently used as fillers of cooling towers. Results show that heat transfer rates per consumed power were larger for enhanced plates as compared with that of plain plate. Highest heat transfer coefficient was obtained for wave shape followed by chevron and dimple shape. For wave shape, cross corrugations induced significant mixing of fluids, which enhanced the heat transfer. Friction factor yielded a similar trend with the heat transfer coefficient. However, heat transfer rate and pressure drop per sheet was the largest for chevron shape, due to the largest heat transfer area per sheet.

• Earthquakes and Structures
• /
• v.8 no.5
• /
• pp.1215-1240
• /
• 2015

In this paper, the Theory of Plastic Mechanism Control (TPMC) is applied to the seismic design of dual systems composed by moment-resisting frames and Chevron braced frames. The application of TPMC is aimed at the design of dual systems able to guarantee, under seismic horizontal forces, the development of a collapse mechanism of global type. This design goal is of primary importance in seismic design of structures, because partial failure modes and soft-storey mechanisms have to be absolutely prevented due to the worsening of the energy dissipation capacity of structures and the resulting increase of the probability of failure during severe ground motions. With reference to the examined structural typology, diagonal and beam sections are assumed to be known quantities, because they are, respectively, designed to withstand the whole seismic actions and to withstand vertical loads and the net downward force resulting from the unbalanced axial forces acting in the diagonals. Conversely column sections are designed to assure the yielding of all the beam ends of moment-frames and the yielding and the buckling of tensile and compressed diagonals of the V-Braced part, respectively. In this work, a detailed designed example dealing with the application of TPMC to moment frame-chevron brace dual systems is provided with reference to an eight storey scheme and the design procedure is validated by means of non-linear static analyses aimed to check the actual pattern of yielding. The results of push-over analyses are compared with those obtained for the dual system designed according to Eurocode 8 provisions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.528-534
• /
• 2020

The early development and use of plate heat exchangers (PHE) were in response to stringent statutory requirements from dairy products in the late 19th century, but PHEs were not exploited commercially until the 1920s. Since then, although the basic concept of PHEs has changed little, its design and construction have progressed significantly to accommodate higher temperatures and pressures, as well as large heat exchanging capacities. The development of current chevron-type corrugated heat plates has been ongoing since the oil shock in the 1970s to improve energy efficiency. The development trend of PHEs is consistent with the development of larger heat plates with better thermal efficiency, lower pressure drop, and good flow distribution. In this study, the thermal performance of small heat plates (PHE-S) and large heat plates (PHE-L) with the same plate depth and corrugation pitch were analyzed experimentally for each channel (H, M, and L type) to suggest development directions of heat plates. The test results showed that for the convectional heat transfer coefficient, the PHE-S was on average, 16.5% higher in the H type, 25% higher in the M type, and 40% higher in the L type than PHE-L. In the case of the pressure drop, the PHE-S was 19% higher in the H type, 46% higher in the M type, and 61% higher in the L type than PHE-L. These results were attributed to the differences in fluid distribution areas between the PHE-S and PHE-L, among other potential causes.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.571-578
• /
• 2003

An effective seismic retrofit scheme for inverted V braced (or chevron type) steel frames was proposed by studying the redistribution of forces in the post-buckling range. The steel frames with chevron bracing are highly prone to soft story response once the compression brace buckles under earthquake loading. This paper shows that the seismic performance of such frames could be significantly improved by supplying tie bars to redistribute the inelastic deformation demand over the height of the building. A practical design method of the retrofit tie bars was also proposed by considering the sequence of buckling occurrence.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.8
• /
• pp.535-542
• /
• 2011

The performance of a plate heat exchanger for using liquid solution in the absorption chiller-heater was analyzed. The model was developed by using the various performance prediction correlations. The performance characteristics of the plate heat exchanger with the mass flow rate ratio was verified by using experimental data. To investigate performance of plate heat exchanger with geometry variables, the chevron angle, corrugated wave length, and corrugation depth were changed. As a result, the capacity of Kim and Martin correlation models was similar with the experimental data, and the capacity difference was less than 2%. Besides, the pressure drop of Marin correlation model showed a similar variation with experimental data, and the difference of pressure drop was less than 1.5 kPa.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.178-183
• /
• 1998

This paper examines the crack growth behavior of 7075-T651 and 5052-H32 aluminum alloys for variable load within tensile load range condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure are investgated by compliance method. The applied initial stress ratio is R=0.3 and variable load are R=0.65, 0.46. Crack length, stress intensity factor range, ratio of effective stress intensity factor range and crack growth rate etc. are inspected with fracture mechanics estimate.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.151-165
• /
• 1997

The Kyemyeongsan area of Chungju in the NE part of the Ogcheon metamorphic zone, Koera, consists mainly of the Ogcheon Supergroup(Taehyangsan Quartzite, Hyangsanri Dolomite and Kyemyeogsan Formation) and the MeSozoic Chungju granite. The Kyemyeongsan Formation is composed mainly of metamorphic rocks of various grades derived from conglomeratic, basic, acidic, pelitic and psammitic rocks. The basic and acidic rocks show alternated or interfingered appearence, indicating that they were derived form bimodal type of magmatism in rift environment. Conglomeratic rocks overlie acidic volcanic rocks in geneal, but are underlain by both acidic plutonic and volcanic rocks. This indicaties that the acidic magmatism before the formation of conglomeratic rocks was different from that during or after the formation of conglomeratic rocks in its occurrence mode. The geological structure of the Ogcheon metamorphic zone in the Kyemyeongsan area, Chungju was formed at least by three phases of deormation. The first phase deformation(D1) formed a regional-scale sheath-type fold(F1) closed into the east. Its axial phane(S1) strikes NNW to NW and dips WSW to SW. The stetching lineation(L1), related to the sheath-type fold, plunges westward. The second phase deformation (D2) formed asymmetric fold(F2) of ESE-to SE-vergence with NNE to NE striking axial plane(S2) and $20~45^{\circ}/210~230^{\circ}$ plunging axis(L2). The F2 fold reoriented the original westward plunging L1 into northwestward plunging L1 in its lower limb(overturned limb). The third phase of deformation(D3) was recognized as chevron-type fold(F3) with $45^{\circ}/265$^{\circ}$ plunging axis. The F3 fold was formed by the compression of N-S direction, resulting in the reorientation of the original $20-45^{\circ}/210~230^{\circ}$ plunging L2 into mainly $35~45^{\circ}/260~280^{\circ}$ and subsidiarily $30~45^{\circ}/135~165^{\circ}$ plunging L2. After this deformation, open fold with NS striking and steeply E or W dipping axial plane is formed by the compression of E-W direction.

• Journal of Power System Engineering
• /
• v.5 no.1
• /
• pp.35-43
• /
• 2001

Heat exchangers are called with important devices which have been widely used in industrial fields. Therefore, the design method for a heat exchanger is an important study in the aspect of energy saving. In this study, performance analyses for two types of plate and shell heat exchangers having a corrugated trapezoid shape of a chevron angle with $45^{\circ}$, were executed and compared with experiments. For this study, the operation liquids were adopted with non-phase changing water. In the analysis, ${\epsilon}-NTU$ method was used for a plate and shell heat exchanger and a program was constructed. Independent variables for a plate and shell heat exchanger are flow rate and inlet temperature. Compared with experimental data, the accuracy of the developed are ${\pm}2.5%\;and\;{\pm}5%$ at the type A and type B in the heat transfer rate, respectively. In the pressure drop, the accuracy of the proposed program for a plate and shell heat exchanger is within ${\pm}3%$ and 5% error bounds for the type A and type B, respectively.