• 터널과지하공간
• /
• 제30권3호
• /
• pp.256-269
• /
• 2020

본 연구의 목적은 KURT 화강암 시료의 포화유무에 따른 균열손상 기준과 파괴인성의 변화를 측정하는 것이다. 이를 위하여 일축압축시험을 이용한 소성체적변형률을 통해 KURT 화강암의 균열손상 기준을 도출하였다. 또한 암석의 파괴인성을 보다 신뢰성 있게 측정하기 위해 암석의 비선형적 변형에 대한 보정(Level II Method; ISRM, 1988) 을 통해 포화유무에 따른 KURT 화강암의 수정 파괴인성(corrected fracture toughness)을 측정하였다. 시험결과 건조시료의 평균 균열개시 응력(σ_ci)과 균열손상 응력(σ_cd)은 91.1 MPa과 128.7 MPa이었으며, 포화시료의 평균 균열개시 응력(σ_ci)과 균열손상 응력(σ_cd)은 58.2 MPa과 68.2 MPa이었다. 건조시료에 비해 포화시료의 균열개시 응력은 36% 감소하였으며 균열손상 응력은 건조시료 대비 47%나 감소되는 결과를 나타내었다. 균열손상 응력(σ_cd)이 상대적으로 더욱 감소하였음을 감안할 때 시료의 포화로 인해 더 낮은 응력조건에서 구조물에 대한 손상이 쉽게 발생할 수 있음을 알 수 있다. KURT 화강암의 비선형성을 고려한 수정 파괴인성은 0.811 MPa·m^0.5이었으며 포화시료의 수정 파괴인성은 0.620 MPa·m^0.5이었다. 즉 암석의 비선형성을 고려함으로써 파괴인성의 증가를 확인할 수 있었으며, 암석의 포화시 수정 파괴인성은 24% 감소하였다. 따라서 지하수 포화로 인해 암석 내 균열의 생성과 진전에 대한 저항성이 감소함을 알 수 있다.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.834-842
• /
• 1998

This paper examines the crack growth behavior of 7075-T651 and 5052-H32 aluminum alloy under high-low block loading condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure ae investigated by compliance method. The applied stress ratios are R=0.15, 0.0, -0.15 and R=-0.15, 0.0, 0.15. The crack growth rate was found to increase as the load amplitude increases. However,${\bigtriangleup}K_eff$ was almost independent on the stress ratio. The experimental constants of 7075-T651 and 5052-H32 in Paris law were c`=1-1.3${\times}{10^-7},m`=3~3.2 and c`=4~6{\times}{10^-9}, m`=4.3-4.8$, respectively. $K_op$ of 7075-T651 and 5052-H32 becomes smaller as the stress ratio decreases. It seems that the crack closure affects $K_op$.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.311-322
• /
• 1998

American Society for Testing and Materials (ASTM) standard test method PS 070-97 has been created for measuring fracture toughness of advanced ceramics. PS 070-97 includes three test methods which use beams in bending: chevron notch (CNB), single-edged precracked beam (SEPB), and surface crack in flexure (SCF). Supporting data has been collected through several Versailles Advanced Materials and Standards round robins. This paper discusses the evolution of the standard including the rationale for the choice of the three methods and the specifications in the standard. Progress on Standard Reference material 2100 which will have certified values of fracture toughness is presented.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.51-54
• /
• 2003

Internal defects such as chevron crack occasionally occur in the process of cold extrusion or cold drawing. It is known that the existence and property of inclusion greatly influences the generation of the internal crack. However, in the plastic working field, research about the effect of the inclusion on the fracture is not theoretically analyzed. This paper describes effects of the physical property of inclusion on the internal fracture generation in the process. Prediction of fracture was evaluated by critical damage value calculated by the equation of Cockcroft & Latham and its change by the inclusion physical property such as size and stiffness was investigated.

• Geomechanics and Engineering
• /
• 제17권1호
• /
• pp.57-67
• /
• 2019

Water-induced strength reduction is one of the most critical causes for rock deformation and failure. Understanding the effects of water on the strength, toughness and deformability of rocks are of a great importance in rock fracture mechanics and design of structures in rock. However, only a few studies have been conducted to understand the effects of water on fracture properties such as fracture toughness, crack propagation velocity, consumed energy, and microstructural damage. Thus, in this study, we focused on the understanding of how microscale damages induced by water saturation affect mesoscale mechanical and fracture properties compared with oven dried specimens along three notch orientations-divider, arrester, and short transverse. The mechanical properties of calcite-cemented sandstone were examined using standard uniaxial compressive strength (UCS) and Brazilian tensile strength (BTS) tests. In addition, fracture properties such as fracture toughness, consumed energy and crack propagation velocity were examined with cracked chevron notched Brazilian disk (CCNBD) tests. Digital Image Correlation (DIC), a non-contact optical measurement technique, was used for both strain and crack propagation velocity measurements along the bedding plane orientations. Finally, environmental scanning electron microscope (ESEM) was employed to investigate the microstructural damages produced in calcite-cemented sandstone specimens before and after CCNBD tests. As results, both mechanical and fracture properties reduced significantly when specimens were saturated. The effects of water on fracture properties (fracture toughness and consumed energy) were predominant in divider specimens when compared with arrester and short transverse specimens. Whereas crack propagation velocity was faster in short transverse and slower in arrester, and intermediate in divider specimens. Based on ESEM data, water in the calcite-cemented sandstone induced microstructural damages (microcracks and voids) and increased the strength disparity between cement/matrix and rock forming mineral grains, which in turn reduced the crack propagation resistance of the rock, leading to lower both consumed energy and fracture toughness ($K_{IC}$).

• 설비공학논문집
• /
• 제28권5호
• /
• pp.171-177
• /
• 2016

Plate heat exchangers have been widely used in various fields because of their high heat transfer coefficients, small area of installation, and ease of maintenance compared to other heat exchangers. However, when plate heat exchanger is used for a long time, leak can occur due to inner crack. Therefore, it is important to understand the inner flow characteristics in plate heat exchangers. In this study, the inner flow characteristics and flow rate of plate heat exchanger were evaluated using various flow directions, pin-hole sizes, and Reynolds numbers. In downflow, initially most water flowed to the opposite of the inlet due to distribution region. Then it gradually had a uniform distribution due to chevron configuration. In upflow, it had a uniform flow consistently due to the dominant gravity effect. As the Reynolds number increased, the leak rate was decreased due to the inertia effect regardless of the flow direction.

• 터널과지하공간
• /
• 제9권4호
• /
• pp.315-327
• /
• 1999

최근들어 발파, 수압파쇄, 암반사면 등의 암반공학적 문제에 있어서 암석파괴역학이 널리 적용되고 있다. 그러나 암석 고유의 특성으로서 파괴역학에서 가장 중요한 변수인 암석의 파괴인성 측정에 관한 방법은 아직 확립되지 못한 실정이다. 본 연구에서는 기존 파괴인성 측정법과 비교하여 많은 장점을 가지고 있는 CCNBD, SCB, CNSCB 및 BDT등과 같은 디스크 형태의 시험편을 사용하여 Mode I 파괴인성을 측정하였다. 또한 CCNBD 시험편에 STCA법을 적용하여 혼합모드 및 Mode II 파괴인성을 측정하였다. 각시험에서 시험편의 두께, 지름 및 노치길이 등과 같은 치수효과가 파괴인성에 끼치는 영향을 조사하였다. 혼합모드 시험결과로부터 여러 회귀곡선을 적용하여 파괴포락선을 구하였고 시험결과를 혼합모드에서의 세 가지 파괴기준식과 비교하였다. 각 파괴인성 시험 시에 균열전파가 시작되는 하중수준을 정확히 파악하고 균열의 변형거동을 조사하기 위해 미소파괴음 측정을 병행하였다.