• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.893-900
• /
• 2009

To estimate the contribution of epiphytic algae attached on reed to organic matter production in constructed wetland, primary productivity by epiphytic algae was investigated in two sub-wetlands (Banweol and Donhwa wetlands) of the Sihwa Constructed Wetland (CW) with different chemistry of inflows. Chlorophyll a concentration of epiphytic algae was higher in the Banweol wetland (range:37~3,581 mgChl.a/$m^2$surface stem, average:655 mgChl.a/$m^2$surface stem) than the Donhwa wetland (range:87~2,093 mgChl.a/$m^2$surface stem, average:527 mgChl.a/$m^2$surface stem). In contrast, assimilation number (AN) representing photosynthetic activity was higher in the Donhwa wetland with low TN/TP ratio than the Banweol wetland. A negative correlation (r=0.46) was observed between TN/TP ratios of inflows and AN in two wetlands, implying that high photosynthetic activity of epiphytic algae may be related with low TN/TP ratio. The areal primary productivity ranged from 307 to 2,473 mgC/$m^2$/day in the Banweol wetland and from 756 to 2,096 mgC/$m^2$/day in the Donghwa wetland, showing high productivity in summer. Average primary production was lower in the Banweol wetland (1,166 mgC/$m^2$/day) than the Donghwa wetland (1,467 mgC/$m^2$/day), although the standing crop (as chlorophyll a concentration) was high in the Banweol wetland. This result may be due to the low photosynthetic activity of epiphytic algae in the Banweol wetland with high TN/TP ratio. The annual primary production (300 tonC/year) of epiphytic algae contributed 33% of the total production in the Sihwa CW. An excessive organic matter production in constructed wetland can negatively affect the efficiency of water treatment. Therefore, the role of epiphytic algae should be considered in management of constructed wetland for water treatment.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.563-570
• /
• 1997

Volatile flavor components in the mash of takjus prepared by using different nuruks such as Mucor racemosus nuruk, Rhizopus japonicus nuruk, Aspergillus oryzae nuruk, Aspergillus kawachii nuruk and nuruk (Korean-style bran koji), were identified by using GC and GC-MS. Twenty alcohols, 26 esters, 10 acids, 10 aldehydes and 6 others were found in the mash of takju after 16 days of fermentation. Takju by Aspergillus oryzae nuruk had the most various components of volatile flavor. Fifty-four flavor components including ethanol, 2-methyl-1-propanol, 3-methyl-1-butanol, 1-hexanol, 2,3-butadienol (D,L), benzeneethanol, acetic acid ethyl ester, succinic acid diethyl ester, butanoic acid monoethyl ester, acetic acid and benzene acetic acid 4-acetyloxy-3-methyl ethyl ester were usually detected in all the treatments. The relative peak area of volatile components was as follows: alcohol $(71.28{\sim}90.23%)$, ester $(0.66{\sim}9.05%)$, acid $(0.2{\sim}0.6%)$ and aldehyde $(0.02{\sim}0.09%)$. Specially, 1-pentanol and hexanoic acid ethyl ester were high in takju made of nuruk (Korean-style bran koji). 1-Hexanol, 1-dodecanol, acetic acid and 1,2-benzene-dicarboxylic acid diprophenyl ester were high in takju made of Mucor racemosus nuruk. 4-Acetyloxy, 3-methyl benzeneacetic acid phenyl ester, 2-methyl-1-propanol, 3-methyl-1-butanol, succinic acid diethylester, butanoic acid monoethyl ester and butanoic acid were higher content in takju by Rhizopus japonicus nuruk. Acetic acid ethyl ester, pentanoic acid and 3-methyl butanoic acid were high in takju that was made of Aspergillus oryzae nuruk. 1-Butanol was high in takju by Aspergillus kawachii nuruk.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.979-984
• /
• 2006

Although iron is essential for many physiological processes, excess iron can lead to tissue damage by promoting the generation of reactive oxygen species (ROS). There is increasing evidence that ROS might play an important role in the pathogenesis of cardiovascular disease. However, the effects of iron excess on platelet function and the thrombotic response to vascular injury are not well understood. We examined the effects of iron excess-induced oxidative stress and the antioxidants on platelet aggregation. Oxidative stress was accessed by either free iron $(Fe^{+2})$ or hydrogen peroxide $(H_2O_2)$, as well as their combination on washed rabbit platelets (WPs) in vitro. When WPs were stimulated with either $Fe^{+2}$ alone or a subthreshold concentration of collagen, which gave an aggregatory curve with a little effect, and a dose dependent increase in platelet aggregation was observed by increasing concentrations of $Fe^{+2}$ with $H_2O_2$. This aggregation was associated with the iron-catalyzed formation of hydroxyl radicals from $H_2O_2$, and were inhibited by NAD/NADP (proton acceptor), catalase $(H_2O_2\;scavenger)$, tiron (iron chelator), mannitol (hydroxyl radical scavenger), and indomethacin (cyclooxygenase inhibitor), but not by NADH/NADPH (proton donor), superoxide mutase, and aspirin. However, NADH/NADPH, an essential cofactor for the antioxidant capacity by the supply of reducing potentials, showed the effect of an enhanced radical formation, suggesting a role for NADH/NADPH-dependent oxidase. These results suggest that iron $(Fe^{+2})$ can directly interact with washed rabbit platelets and this aggregation be mediated by OH formation as in the Fenton reaction, inhibited by radical scavengers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1166-1173
• /
• 2014

This study investigated the detoxification effects of enzymatic hydrolysate from oyster on acetaminophen-induced toxicity using HepG-2 cells. Oyster hydrolysate was made with 1% Protamex and 1% Neutrase after treatment with transglutaminase (TGPN) or without (PN). Two types of oyster hydrolysate were added to human-derived HepG-2 hepatocytes damaged by acetaminophen, after which the survival rate of HepG-2 cell was measured. In addition, glutamic oxaloacetic transaminase (GOT) and glutamic pyruvic transaminase (GPT) activities in the culture media were evaluated. The survival rates of HepG-2 cells were $136.2{\pm}1.4%$ at $100{\mu}g/mL$ of TGPN and $179.6{\pm}3.8%$ at $200{\mu}g/mL$ of TGPN. These cell survival rates were higher compared to that of the negative control group ($60.7{\pm}3.2%$) treated only with acetaminophen. GOT activity was $38.3{\pm}0.2$ Karmen/mL in the negative control group, whereas it was $19.9{\pm}0.5$ for TGPN ($200{\mu}g/mL$) and $22.0{\pm}2.4$ Karmen/mL for PN ($200{\mu}g/mL$). GOT and GTP activities were shown to be dependent on TGPN concentration, and significant reduction in activities could be conformed. The detoxification efficacy of TGPN was higher compared to that of PN. These results suggest that oyster hydrolysate has potential as a healthy food or pro-drug for liver protection.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.973-979
• /
• 2005

To investigate the effect of Pinus densiflora on biochemical parameters in type I diabetic rats, we evaluated the changes of body weight, fasting blood glucose level, oral glucose tolerance test (OGTT) and biochemical parameters after the intraperitoneal injection of distilled solution of Pinus densiflora in streptozotocin (STZ)­induced rats. Thirty-seven male Sprague Dawley rats $(180\pm10g)$ were divided into four groups; diabetic mellitus (DM) group received STZ (50 mg/kg BW, i.v.); low level of pine extract (LP) group received Pinus densiflora (5 mg/kg BW, i.p.), high level of pine extract (HP) group received Pinus densiflora (10 mg/kg BW, i.p.) after the single injection of STZ (50 mg/kg BW, i.v.), respectively. Normal control (NC) group received saline. The change of fasting blood glucose level and OGTT were measured using glucocard II, and the change of biochemical parameter were measured by Automatic Chemistry Analyzer (Hitach-747, Japan). Mean body weight change of DM group was retarded greatly by STZ-exposure. While, body weights of LP and HP groups were progressively increased with some fluctuation, although the increase rates were slower than that of NC group. Fasting blood glucose levels of LP and HP groups were reduced by Pinus densiflora injection, although the fasting blood glucose levels were higher than that of NC group. The results of OGTT was significantly improved in both of LP and HP group compared to DM group. Increases of blood glucose, alanine aminotransferase (ALT), alkaline phosphatase (ALP) and blood urea nitrogen (BUN) levels by STZ-exposure were attenuated by the Pinus densiflora treatment (p<0.05). From the results, it was suggested that Pinus densiflora has a tendency to decrease STZ-induced toxicity in terms of monitoring fasting blood glucose, OGTT and some biochemical parameters of rat.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.231-237
• /
• 1984

Changes in available lysine and water soluble proteins were checked to obtain the desirable condition of processing for boiled Neverita didyma under the various autoclaving temperatures and times. It was also carried out to assess the affect of heat treatments upon the solubility of coagulable substances in boiled products. In order to evaluate the nutritional quality of processed Neverita didyma under the highest available lysine retention and without bacteria, it was studied the value of pepsin-pancreatin digest residue index in comparison with unprocessed (raw) material. The crude protein content of raw material was higher than that of the other mollusks, while the content of crude fat was showing lower value. It was noticed that the higher contents of coagulable substances and water soluble proteins in processed Neverita didyma were obtained under the conditions, retort temperature at $120^{\circ}C$ above, and 40-60 min. sterilization. After the pannel test, the coagulable substances were not found below the level of $0.40{\pm}0.03$ gram nitrogen/ml of juice. The remarkable retention of available lysine (FDNB-reactive lysine) was resulted in the conditions of autoclaving at $115^{\circ}C$ for 40 minutes in boiled Neverita didyma products, and that processing condition was coincide with the condition of commercial sterilization for boiled top shell. It was revealed that the boiled meat of Neverita didyma showed the higher PPDRI(65.85) than that of raw material (63.16).

• Clean Technology
• /
• v.18 no.1
• /
• pp.102-110
• /
• 2012

In this study, the production of bio-diesel from animal oil by esterification and trans-esterification was investigated. There were three different extraction methods for oil extraction from raw animal fat. Heterogeneous catalysts such as Amberlyst-15 and Amberlyst BD-20 and a homogeneous catalyst such as sulfuric acid were used for esterification. Among three catalysts, the removal efficiency of Free Fatty Acid (FFA) was the highest in sulfuric acid. Response surface method was carried out to find the optimal esterification condition of sulfuric acid and methanol. After the esterification under the optimal condition, this animal fat was used for the trans-esterification. Animal oil used for trans-esterification was below 1% of FFA content and 0.09% of water content. The catalysts for trans-esterification were KOH, NaOH and $NaOCH_3$. To investigate the effects of catalyst type and amount on trans-esterification, The amount of catalyst were changed with 0.3, 0.6 and 0.9 wt%. The molar ratio of methanol/oil was changed with 4, 6, 9 and 12. The amount of catalyst was fixed to 0.8 wt%. The KOH catalyst showed the highest FAME conversion for trans- esterification, and the optimal methanol/oil weight ratio was 6. In the experiments of various catalysts and methanol molar ratios, the highest content of FAME is 96%. However, this FAME content was below Korean bio-diesel standard which is 96.5% of FAME content. After distillation, FAME content increased to 98%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.75-82
• /
• 2010

Indoor cultivation plots for watermelon plant mostly have salt-accumulation problem because of continuous cropping especially with the heavy applications of chemical fertilizers. Thus, this study was conducted to investigate selected soil properties and watermelon growth condition as affected by the application of different farming practices in the salt-affected soils of greenhouse plots used for continuous watermelon production. Five different practice conditions in the experimental plots were applied, 1) a conventional farming practice (CFP), 2) a nitrogen-phosphorus-potassium (NPK) fertilizer management practice (FMP), and 3) the FMP with different amounts (5, 10, and 15 ton $ha^{-1}$)of fresh rice straw treatments (FMP-RS), for three years of study. As comparing with CFP plots, soil organic matter content gradually increased during the experimental years, whereas it decreased in the FMP only plot. Soil pH was not changed in the CFP and FMP plot, but it declined in the FMP-RS plots; however, it increased again from the third year in the FMP-RS plots with applying 10 and 15 ton $ha^{-1}$ of RS treatments. The concentrations of exchangeable cations, $Ca^{2+}$ and $Mg^{2+}$, except $K^+$, and water-soluble anions, ${NO_3}^-$, $Cl^-$, ${SO_4}^{2-}$ and ${PO_4}^{3-}$, markedly decreased in FMP and FMP-RS plots. In particular, the application of rice straw tended to significantly decrease the ion concentrations, especially most anions, in the first year, but there was no more decrease in the second and third study years. With relation to the ion concentrations, the changes of electrical conductivity (EC) after applying the management practices showed very similar to those of the ion concentrations. In addition, incidence of withered watermelon plant after applying the management practices dramatically declined from approximately 20% in the CFP plot to 3.5% in the FMP-RS plots. Water melon fruit weight was also improved by the management practices, especially FMP-RS. Therefore, the fertilizer and/or fresh rice straw application management practices are beneficial to improve salt-affected soils and watermelon plant growth condition.

• Journal of The Korean Association For Science Education
• /
• v.21 no.2
• /
• pp.357-384
• /
• 2001

In this paper, we described practical teaching-learning plans based on three different theoretical approaches to Integrated Science Education (ISE): a knowledge centered ISE, a social problem centered ISE, and an individual interest centered ISE. We believe that science teachers can understand integrated science education through this paper and they are able to apply simultaneously our integrated science teaching materials to their real instruction in classroom. For this we developed integrated science teaching-learning plans for the topic of energy which has a integrated feature strongly among integrated science subject contents. These modules were based upon the teaching strategies of 'Energy' following each integrated directions organized in the previous paper (Three Strategies for Integrated Science Teaching of "Energy" Applying Knowledge, Social Problem, and Individual Interest Centered Approaches) and we applied instruction models fitting each features of integrated directions to the teaching strategies of 'Energy'. There is a concrete describing on the above three integrated science teaching-learning plans as follows. 1. For the knowledge centered integration, we selected the topic, 'Journey of Energy' and we tried to integrate the knowledge of physics, chemistry, biology, and earth science applying the instruction model of 'Free Discovery Learning' which is emphasized on concepts and inquiry. 2. For the social problem centered integration, we selected the topic, 'Future of Energy' to resolve the science-related social problems and we applied the instruction model of 'Project Learning' which is emphasized on learner's cognitive process to the topic. 3. For the individual interest centered integration, we selected the topic, 'Transformation of Energy' for the integration of science and individual interest and we applied the instruction model of 'Project Learning' centering learner's interest and concern. Based upon the above direction, we developed the integrated science teaching-learning plans as following steps. First, we organized 'Integrated Teaching-Learning Contents' according to the topics. Second, based upon the above organization, we designed 'Instructional procedures' to integrate within the topics. Third, in accordance with the above 'Instructional Procedures', we created 'Instructional Coaching Plan' that can be applied in the practical world of real classrooms. These plans can be used as models for the further development of integrated science instruction for teacher preparation, textbook development, and classroom learning.