• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1491-1494
• /
• 2014

High-crystallinity poly(3-hexylthiophene) (P3HT) thin films were prepared by aging the precursor solutions, prepared using a good solvent, chloroform, at low temperatures prior to spin-casting. Lower solution temperatures significantly improved the molecular ordering in the spin-cast P3HT films and, therefore, the electrical properties of field-effect transistors prepared using these films. Solution cooling enhanced the electrical properties by shifting the P3HT configuration equilibrium away from random coils and toward more ordered aggregates. At room temperature, the P3HT molecules were completely solvated in chloroform and adopted a random coil conformation. Upon cooling, however, the chloroform poorly solvated the P3HT molecules, favoring the formation of ordered P3HT aggregates, which then yielded more highly crystalline molecular ordering in the P3HT thin films produced from the solution.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.407-414
• /
• 2014

Polyacrylonitrile (PAN) copolymers with different methyl acrylate (MA) contents were synthesized via solution polymerization and used as precursors for high-performance PAN ultrafine fibrids. The chemical structures of the copolymers were characterized using Fourier-transform infrared spectroscopy and $^{13}C$ nuclear magnetic resonance spectroscopy. Their particle sizes and aspect ratios increased with increasing viscosity, and the degree of crystallinity increased with decreasing concentration of copolymer solution. In contrast, their peak temperature and heat of exotherm increased with decreasing concentration of the copolymer solution. The aromatization indices (AIs) of the fibrids increased with increasing heat-treatment time; however, the AIs decreased when the heat-treatment temperature was higher than the onset temperature of the copolymers. On the other hand, the crystal sizes of the fibrids decreased with increasing concentration of the copolymer solution when the MA content was held constant.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1433-1436
• /
• 2009

Film morphology, crystallinity, and luminescence property of solution processed ZnO films have been studied. Fluorine addition and annealing ambient significantly change the defect-related emission band as well as the structural property. Using the overall emission behaviors, we can predict an optimized process condition for solution-based ZnO thin film.

• Korean Chemical Engineering Research
• /
• 제59권2호
• /
• pp.219-224
• /
• 2021

Ion flotation is an efficient method to remove metal ions from aqueous solution. In this work, ion flotation was applied to calcium removal from aqueous solution. The parameters used included sodium stearate (SS) and sodium dodecyl sulfate (SDS) as collectors, 1-butanol and 1-propanol as frothers, pH, and air-flow rate. An L16 orthogonal array was chosen according to the mentioned factors and levels, and experimental tests were conducted according to the Taguchi orthogonal array. The results showed that all of the factors except one had significant effect on the flotation performance. The percentage contribution of parameters showed that type of frother and type of collector made the greatest (43.14%) and the lowest (9.86%) contribution, respectively. In optimal conditions, the recovery of Ca (II) ion was 45.67%. Also, the results illustrated that the Taguchi method could predict calcium removal from aqueous solution by ion flotation with 2.63%. This study showed that the use of ion flotation was an effective method for Ca (II) ion removal from aqueous solution.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.600-604
• /
• 2011

본 연구에서는 박막 트랜지스터(TFTs)에 사용 가능한 Indium Gallium 산화물(IGO) 박막을 스핀코팅을 이용한 화학적 용액공정을 사용하여 $SiO_2$/Si 기판 위에 증착시켰다. 또한 IGO 박막을 증착한 후에 이루어지는 열처리 온도가 박막의 결정화에 미치는 영향과 이들의 전기적 특성이 조사되었다. 스핀코팅법에 의한 IGO 박막을 증착하기 위해 사용된 In과 Ga의 비율은 2:1로 고정하였으며, 박막의 열처리 온도는 $300{\sim}600^{\circ}C$의 범위에서 변화시켰다. 공기 중에서 $300^{\circ}C$와 $600^{\circ}C$에서 1시간 동안 열처리한 IGO 박막을 사용하여 제조한 박막 트랜지스터의 전류 이동도(field effect mobility)는 각각 0.34와 3.83 $cm^2/V{\cdot}s$로서 양호한 전자소자의 성능을 보였다. 또한 on/off 전류비(current ratio)는 $10^5$ 이상이었으며, IGO 박막의 평균 투과율은 98%이었다.

• 대한화학회지
• /
• 제43권1호
• /
• pp.1-7
• /
• 1999

이 논문에서는 광화학적 방법을 이용하여 금속 콜로이드 입자를 반도체 나노입자를 함유한 수용액내에서 제조하여 그 광학적 특성을 관찰하였다. 형성된 금속입자는 사용된 반도체 입자에 따라 다른 경향을 나타낸다. Au 금속 입자를 CdS 입자를 함유한 수용액내에서 제조한 경우 일반적인 금속 입자의 Plasmon Resonance의 특성을 보이는 반면 Ag금속 입자를 AgBr 입자를 함유한 용액내에서 제조한 경우 Red-Shift 현상을 보였고, 그 정도는 UV 조사량에 따라 달라졌다. 이러한 금속 Plasmon Resonance의 Red-Shift 현상을 Effective Medium 이론을 이용하여 이론적으로 설명하였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권9호
• /
• pp.1457-1462
• /
• 2007

A simple and facile sonochemical route was described for the fabrication of diameter-controlled ZnO nanorod arrays on Si wafers. The diameter of ZnO nanorods was controlled by the concentration of zinc cations and hydroxyl anions in aqueous precursor solution. At high concentration of the precursor solution, thick ZnO nanorod arrays were formed. On the contrary, thin ZnO nanorod arrays were formed at low concentration of the precursor solution. The average diameter of ZnO nanorods varies from 40 to 200 nm. ZnO nanorod arrays with sharp tip were also fabricated by the step-by-step decrease in precursor solution concentration. The crystal structure and optical characteristics of ZnO nanorods were investigated by transmission electron microscopy, X-ray diffraction, and photoluminescence spectroscopy. Growth mechanism of ZnO nanorod arrays was also proposed.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2001년도 High Temperature Superconductivity Vol.XI
• /
• pp.28-28
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• 제24권12호
• /
• pp.1838-1840
• /
• 2003

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3796-3798
• /
• 2011