• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.103-109
• /
• 2016

Polyethylene pipes has useful benefits which are anti-corrosive and flexible material, so it is used to gas pipes but also class 3 water pipes of nuclear power plant, process pipes of petrochemical plant and chemical plant. So the usage of polyethylene pipes is widely increased. But it has been limited for the usage of polyethylene, because it can not be directly detected to fusion joints by using non destructive evaluation. Polyethylene pipes are connected by two methods, one is butt fusion and the other is electrofusion. Butt fusion is widely used to connecting the pipes. It is proposed to method for determining the reliability of joints in this study that is detection of the melt flow zone at fusion joints. In this study, middle density polyethylene is used, outside diameter of the test specimen is 225mm and thickness is 20.5mm. Speed of ultrasonic of this test specimen is 2,200m/s. Test specimens were fabricated by varying the heating time which means from 0% to 130% applying time through heating plate to polyethylene for detecting melt flow zone. Also 4 additional test specimens were made, one was made that not scrapping attached surface of pipes but applying 100% of the proper heating time and the others were made to include of soil, gravel and vinly tape paper at fusion joints, that were also applied 100% of proper heating time. Ultrasonic testing to measure the melt flow zone of 20 test specimens was conducted by using 3.5MHz and 5.0MHz ultrasonic probes and melt flow zone measuring was conducted to three times at different point to one specimen. To differentiate the melt flow zone signal, post image processing was equally conducted to all test results and image levels, contrast, sharpen, threshold were adopted to all teat results and the test results were displayed gray scale. From the results, for the shorter heating times the reflection area of multiple echo have been increased, so the data was obtained from the position where it can be eliminated as much as possible. At 80% of proper heating time(168 sec.), the signal of melt flow zone was obtained clearly, so measuring could be conducted. From 7% of proper heating time(15 sec.) to shorter heating times. we could not obtain the signal because test specimen was not fused. From the result, we can verify that measuring of melt flow zone by using phased array ultrasonic imaging method is possible. And we can verify to complete and incomplete butt fusion by measuring the melt flow zone.

• Research in Plant Disease
• /
• v.16 no.1
• /
• pp.101-105
• /
• 2010

This study was aimed to understand conidial disperse of the pepper anthracnose fungus Colletotrichum acutatum, elapse time for the disease development, and inoculum potentials on infected fruits. Most (99.2%) conidia of the fungus disseminated from inoculum source on the rainy day, while only 0.8% conidia dispersed on the sunny day. Among the conidia 93.3% were caught under 60 cm height at 30 cm distance; however, conidia were detected at 120 cm height at the distance. Relatively susceptible pepper fruits to anthracnose showed first visible symptoms at 4 days after infection under a mimic field condition. However, it seemed that over 10 days are required for the disease to develop on moderately resistant pepper fruits under unfavorable conditions. The number of conidia formed on a lesion was positively correlated with the lesion size ($R^{2}=0.88$). Over 10 millions of conidia were formed at a normal lesion size 1.5 cm in length. In some large coalesced lesions ca. 4cm in length produced over 100 millions of the fungal conidia. Results further confirmed that the rainfall is the key factor for the inoculum disperse of the pepper anthracnose pathogen, Colletotrichum acutatum, and a long distance dissemination is plausible according to rain and wind intensity. Consequently, rain-proof structures are ideal to avoid the disease, and removal of infected fruits and timely chemical spray are indispensible to reduce the inoculum potential in the field.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.1-14
• /
• 1970

The following results were obtained by surveying the productivity of mulberry fields in Korea. 1. The productivity of mulberry field per 10a in which cocoon can be yield belongs to the range of 9.8∼105kg, and among them the productivity of 20 to 60kg was chiefly distributed. And their average was 50.2kg. 2. In general, the larger the mulberry field in scale per a person is, the lower the productivity of it is, but about 6.6 ares per a person was estimated to be economic scale for high productivity. 3. As far as the texture of soil is concerned, sandy-loam and loam contained a capacity of higher productivity while others like clay and sand that of lower productivity, And the depth of surface soil must be at least 50cm, although 70cm's depth of surface sail could bring about high productivity. 4. Fertilization of 900kg's compost on planting and 1,200kg's that after planting could enhance the productivity, because the use of compost have a positive relation to the productivity. 5. The greater the number of farmer's domestic animals is as a source of organic matter the higher the productivity is. 6. In the case of fertilization of 1,200kg compost, the amount of 20kg's nitrogen per 10 ares as chemical manure was best for high productivity. However, fertilization of 14.7kg's nitrogen as average amount of that, which is far below the standard amount, had been a factor to reduce the productivity of mulberry field. 7. In pruning the low-cut form resulted in high productivity, but as their shape become taller due to the lack of techniques, they were turned out to be non head pruning, thus to produce poor harvest of leaves. 8. The pure mulberry fields showed better productivity than others such as wide and narrow ridge planting and inter-crop planting. 9. As for the degree of planting density, at least 800 trees per 10 ares should be planted to increase the productivity, although the planting of 713 trees per 10 ares could be possible in case of the low stemmed pruning. 10. The hole and tranch in planting must be digged as wider and dipper as possible far the better growth of mulberry tree. 11. On the whole, varieties like NOsang and Y oung-cheun choowoo had a tendency of lower productivity.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.757-767
• /
• 2015

This study was conducted to investigate the effects of moisture content and particle size of sawdust on the fuel characteristics of wood pellets produced with Mongolian oak (Quercus mongolica, QUM), red pine (Pinus densiflora, PID) and larch (Larix kaempferi, LAK) sawdust using a flat-die pelletizer. Prior to produce wood pellets, the sawdust was controlled to the moisture content of 8, 11, 12% and was screened to the particle size of 2 and 4 mesh. In the analysis of its chemical composition, QUM had a high ash content, and PID and LAK contained large amount of lignin. In case of the fuel characteristics, PID pellets had the lowest moisture content of pellets (P-MC), and LAR pellets was found to have the highest bilk density (BD) and durability (DU). With the increase of moisture content of sawdust (S-MC), P-MC and DU of QUM, PID and LAK pellets increased, but BD of QUM and LAK pellets decreased. When size of sawdust used for the production of wood pellets decreased, P-MC and BD of LAK pellets and BD of QUM pellets increased. Decrease of particle size contributed to the increase of DU of QUM, PID and LAK pellets. In addition, BD and DU of QUM pellets produced with 12% S-MC sawdust increased as its particle size reduced. For LAK pellets, DU was not influence by particle size in the S-MCs of 10% and 12%, but increased with the decrease of particle size in the S-MC of 8%. Based on the results and economical aspects, 10% MC and 2 mesh paricle size for QUM sawdust and 12% MC and 2 mesh particle size for PID sawdust might be optimal conditions for pellets production, and fuel characteristics of wood pellets produced by the conditions greatly exceeded the minimum requirements for the $1^{st}$-grade wood pellets of the standard designated by Korea Forest Research Institute.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.4
• /
• pp.347-355
• /
• 1986

The Sonakdong river is very important water source not only for agricultural water of Kimhae field but also for fishery water. Recently the middle and lower areas of the river have the tendency to be heavily contaminated by domestic sewage and agricultural chemicals. Fifty six water samples were collected from 8 stations from July to December in 1985 for the experiment (Fig. 1). To evaluate the water quality, pH, water temperature, electrical conductivity, chloride ion, nutrients ($NO^{-}_{2}-N,\;NO^{-}_{3}-N,\;NH^{+}_{4}-N,\;PO^{3-}_{4}-P,\;SiO_2-Si$), total coliform, fecal coliform, and fecal streptococcus were determined. Range and mean value of the samples were as follows; pH $6.3{\sim}9.4$, 7.91; water temperature $6.1{\sim}34.8^{\circ}C,\;23.88^{\circ}C$; electrical conductivity (from St. A to G) $1.575{\times}10^2{\sim}30.50{\times}10^2{\mu}{\mho}/cm,\;6.57{\times}10^2{\mu}{\mho}/cm$; chloride ion $23.5{\sim}14,300mg/l$, 770.0mg/l; nitrite-nitrogen $0.007{\sim}0.110mg/l$, 0.053mg/l; nitrate-nitrogen $0.001{\sim}1.638mg/l$, 0.649 mg/l; ammonia-nitrogen $0.017{\sim}4.200mg/l$, 0.497mg/l; phosphate-phoshorus $0.011{\sim}0.281mg/l$, 0.086mg/l; and silicate-silicious $2.4{\sim}6.5mg/l$, 4.43mg/l. Electrical conductivity and chloride ion of the station F(Chomanpo) were $2.676{\times}10^2{\mu}{\Omega}cm$ and 123.99mg/l which were lower than those of others. Among the analyzed nutrients, silicate-silicious concentration was the highest through all the samples. The bacterial density of the samples ranged $36{\sim}110,000/100ml$ for total coliform, $15{\sim}46,000/100ml$ for fecal coliform and $3.6{\sim}15,000/100ml$ for fecal streptococcus. The range and the mean of the TC/FC ratio were $3.0{\sim}9.6$, 5.51 and those of the FC/FS ratio were $1.1{\sim}9.2$, 6.19, respectively. On the other hand, fecal coliform was not detected in about $78\%$ of the water samples examined. Composition of coliform was $52\%$ Escherichia coli group, $3\%$ Citrobacter freundii group, $13\%$ Enterobacter aerogenes group and $31\%$ others.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.2
• /
• pp.127-132
• /
• 2001

This study was conducted for ten years to evaluate the effective soil management for preventing the infection of root-knot nematode in the field of continuous cultivation with oriental melon under plastic house in Songju area of kyongbuk province. The content of available phosphate, total nitrogen, organic matter, CEC, and exchangeable base in the soil increased with the increase of continuous cultivation year. Especially salt content in the soil increased form 1.2 to 4.55 mS/cm and the yield of oriental melon dramatically decreased with the continuous cultivation year. The number of root-knot nematode was 91 per $300\;cm^3$ of soil in the field of continuous cultivation for 3 years and showed slight damage on the oriental melon, but it was 518 in the field of $4{\sim}6$ years continuous cultivation and showed that 50% of plants died in August, and the yield of late season was less than 50% compared to normal plant. For the seasonal changes in infection rate of root-knot nematode on oriental melon plant, 15% of the normal plant was infected by nematode in February and increased gradually by $10{\sim}20%$ per month, 60% of plants was infected in July. The density of root-knot nematode nymph was 167 in February and increased to 1,625 in August. The infection rate of nematode was 35%, and the number of nematode was about 54 in nursery soil originated from paddy soil, upland soil, and river sand. There were no relationship between the number of nematode and available phosphate or exchangeable base in the soil of plastichouse where oriental melon plants were grown.

• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.85-90
• /
• 1998

A series of experiments were carried out to determine the effect of seed dressing application of chemicals on the early occurring rice insect pests. The number of small brown planthopper adults per 3hills in seed-dressing plot of Imidacloprid WS (Im WS) was 1.6 and its control efficacy was over 90%, compared with that of untreated plot. Rice water weevil was observed in the density of 8.8 larvae per 5 hills seed-dressed Im WS plots(showing 95.5% of control efficacy). Control efficacy of Im WS and Im GR against adult weevils lasted for 26 days after treatment and was higher than that of Carbofuran GR. Rates of injured stems by rice stem maggot and injured leaves by rice leaf miner were 3% and 3.7% in Im WS treatment plot respectively. Seed germination rate after seed dressing with recommended dosage (3 g/seed kg) of Im WS was 71 % on the 1st day and increased on 5th day up to that of untreated seed. The residual amount of Im in seed dressing plot was 0.11 ppm in rice roots and 0.05 ppm in leaves on the 40th day after treatment. Residual effect of Im WSI sustained for 50 days with over 95% insecticidal effect for the rice water weevil and over 90% for the brown planthopper. Quantity of the chemical applied in the field was calculated as 0.084 kg a.i./ha in seed dressing and 0.3 kg a.i./ha in seed box treatment, respectively It took 1 hour to treat insecticide by seed dressing, 2.5 hours by seed box applying, and 3.6 hours by water surface releasing per 990 $m^2$.

• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.35-42
• /
• 1970

Five samples of Korean native Maeju(fermented soy-bean mash) loaves which were collected each from Kyunggi, Chungchung, Kangwon, Cholla and Kyungsang-Do were examined for their fermenting microorganisms. The results of taxonomic and ecological studies of fermentation microorganisms in these Maeju loaves were as the fellows. (1) The fungus flora grew only is the outer layer of Maeju loaves. Miscellaneous molds, 3 species of Mucor, 2 species of Pericallium., one species each of Scopulariopsis and Aspergillus, were isolated. None of them seemed exclusively predominant to be able to designate as the ecologically significant. (2) The bacterial flora which consisted of two species, Bacillus subtilis and Bacillus pumilus were distributed uniformly in th a entire Maeju loaves. The inner parts of Maeju loaves were especially inhabited solely by these bacterial flora. Probably the Korean native Maeju fermentation could be characterized by these bacterial flora. A Staphylococcus species was also isolated probably as a casual contaminant. (3) The yeasts, Rhodotorula flava and Torulopsis dattila, were isolated from Maeju loaves though their ecological significance was not clear. (4) The ecological aspects of fermentation microbes in the outer and inner parts of Maeju loaves were apparently different, consequently different fermentation processes might have occurred in these two parts and it brought quite different final outlooks in the final matured Maeju loaves. The outer part, rather rigid and dry, retained the light brown color of boiled soy-bean; whereas the inner part, soft and sticky, showed dark brown color indicating severe chemical changes. (5) The aflatoxin producing mold, Aspergillus oryzae was isolated from one sample among 5 of Maeju loaves. In addition to the low probability of isolability from Maeju loaves samples, since this mold grew only in the outer layer of Maeju loaves with such a low population density, about $10^4/g$, perhaps the aflatoxin problem in Korean native soysauce may not be critical.

• Korean Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.31-41
• /
• 2011

To optimize the natural chemical agents against nuisance phytoplankton, we examined algal removal activity (ABA) of Plant-Mineral Composite (PMC), which already developed by our teams (Kim et al., 2010), on various conditions. The PMC are consisted of extracted-mixtures with indigenous plants (Camellia sinensis, Quercusacutissima and Castanea crenata) and minerals (Loess, Quartz porphyry, and natural zeolite), and characterized by coagulation and floating of low-density suspended solids. A simple extraction process was adopted, such as drying and grinding of raw material, water-extraction by high temperature-sonication and filtering. All tests were performed in 3 L plastic chambers varying conditions; six different concentrations ($0{\sim}1.0\;mL\;L^{-1}$), six light intensities ($8{\sim}1,400\;{\mu}mol\;m^{-2}s^{-1}$), three temperatures ($10{\sim}30^{\circ}C$), four pHs (7~10), five water depths (10~50 cm), and three different waters dominated by cyanobacteria, diatom, and green algae, respectively. Results indicate that the highest ABA of PMC was seen at $0.05\;mL\;L^{-1}$ in treatment concentrations, where showed a reduction of more than 80% of control phytoplankton biomass, while $1,400\;{\mu}mol\;m^{-2}s^{-1}$ in light intensity (>90%), $20{\sim}30^{\circ}C$ temperature (>60%), 7~9 in pH (>90%), below 50 cm in water depth (>90%), and cyanobacterial dominating waters (>80%), respectively. Over the test, ABA of PMC were more obvious on the algal biomass (chlorophyll-${\alpha}$) than suspended solids, suggesting a selectivity of PMC to particle size or natures. These results suggest that PMC agents can play an important role as natural agents to remove the nuisant algal aggregates or seston of eutrophic lake, where occur cyanobacterial bloom in a shallow shore of lake during warm season.

• Korean Journal of Ecology and Environment
• /
• v.50 no.1
• /
• pp.1-15
• /
• 2017

Daecheong Reservoir was made by the construction of a large dam (>15 m in height) on the middle to downstream of the Geum River and the discharge systems have the watergate-spillway (WS), a hydropower penstock (HPP), and two intake towers. The purpose of this study was to investigate the limnological anomalies of turbid water reduction, green algae phenomenon, and oligotrophic state in the lower part of reservoir dam site, and compared with hydro-meteorological factors. Field surveys were conducted in two stations of near dam and the outlet of HPP with one week intervals from January to December 2000. Rainfall was closely related to the fluctuations of inflow, outflow and water level. The rainfall pattern was depended on the storm of monsoon and typhoon, and the increase of discharge and turbidity responded more strongly to the intensity than the frequency. Water temperature and DO fluctuations within the reservoir water layer were influenced by meteorological and hydrological events, and these were mainly caused by water level fluctuation based on temperature stratification, density current and discharge types. The discharges of WS and HPP induced to the flow of water bodies and the outflows of turbid water and nutrients such as nitrogen and phosphorus, respectively. Especially, when hypoxic or low-oxygen condition was present in the bottom water, the discharge through HPP has contributed significantly to the outflow of phosphorus released from the sediment into the downstream of dam. In addition, HPP effluent which be continuously operated throughout the year, was the main factor that could change to a low trophic level in the downreservoir (lacustrine zone). And water-bloom (green-tide) occurring in the lower part of reservoir was the result that the water body of upreservoir being transported and diffused toward the downreseroir, when discharging through the WS. Finally, the hydropower effluent was included the importance and dynamics that could have a temporal and spatial impacts on the physical, chemical and biological factors of the reservoir ecosystem.