• 폴리머
• /
• 제25권1호
• /
• pp.41-48
• /
• 2001

폴리카프로락톤디올(PCD) 및 폴리에틸렌글리콜(PEG), 디이소시아네이트 및 1,2,6-헥산트리올을 용액중합 방법으로 반응시켜 폴리우레탄(PU) 마이크로겔을 합성하였다. PCD/PEG의 몰비가 다른 마이크로겔의 임계 겔화농도의 성질과 생성에 영향을 주는 중요한 인자임을 알았다. 디이소시아네이트, PCD/PEG의 몰비 및 PEG의 분자량을 달리하여 제조한 PU 마이크로겔의 물리적 및 열적 성질을 실험하였다. PU 마이크로겔은 300nm 이하의 다분산성 구형의 작은 입자로 분포되어 있으며, 저점도 특성을 나타내었다.

• Journal of Microbiology and Biotechnology
• /
• 제26권10호
• /
• pp.1746-1754
• /
• 2016

Recently, spherical beads entrapping quorum quenching (QQ) bacteria have been reported as effective moving QQ-media for biofouling control in MBRs for wastewater treatment owing to their combined effects of biological (i.e., quorum quenching) and physical washing. Taking into account both the mass transfer of signal molecules through the QQ-medium and collision efficiencies of the QQ-medium against the filtration membranes in a bioreactor, a cylindrical medium (QQ-cylinder) was developed as a new shape of moving QQ-medium. The QQ-cylinders were compared with previous QQ-beads in terms of the QQ activity and the physical washing effect under identical loading volumes of each medium in batch tests. It was found that the QQ activity of a QQ-medium was highly dependent on its specific surface area, regardless of the shape of the medium. In contrast, the physical washing effect of a QQ-medium was greatly affected by its geometric structure. The enhanced anti-biofouling property of the QQ-cylinders relative to QQ-beads was confirmed in a continuous laboratory-scale MBR with a flat-sheet membrane module.

• 공업화학
• /
• 제18권6호
• /
• pp.537-544
• /
• 2007

본 연구는 흡착제를 이용하여 잔류농약의 흡착특성을 살펴보았다. 흡착제는 $bauxsol^{TM}$과 맥반석을 사용하였다. 잔류농약의 분석은 GC/NPD와 $GC/{\mu}ECD$로 분석하였다. 실험에 사용된 농약은 ${\alpha}$-endosulfan, ${\beta}$-endosulfan, pendimethalin, chlorpyrifos-methyl, fenitrothion이고 회수율은 97% 이상으로 나타났다. $Bauxsol^{TM}$과 맥반석 흡착제의 흡착율은 endosulfan, chlorpyrifosmethyl, pendimethalin, fenitrothion의 내림차순으로 나타났고, 상대적으로 유기염소계 농약이 다른 농약에 비해 높은 제거율을 보여주었다. $Bauxsol^{TM}$은 농약의 화학적 분해와 물리흡착이 동시에 발생하였고, 맥반석은 물리흡착만이 발생하였다. 흡착제 용출액의 높은 pH와 농약구조의 염소이온은 화학적 분해에 많은 영향을 주었다. 흡착제의 물리흡착은 광물의 많은 다공성에 의해 농약 제거율을 높여 주었다. 흡착제는 골프장의 연못 등 수질에 잔류농약제거 가능성을 보여주었다.

• 한국염색가공학회지
• /
• 제29권3호
• /
• pp.155-161
• /
• 2017

In CPB(Cold-Pad-Batch) dyeing, the rubber of the padder roll is influenced by the heat, chemical and mechanical influences and thus aging of the padder roll rubber occurs. This study presents an accelerated thermal aging test of the CPB padder roll rubber with strong alkali conditions. Using Arrhenius formula of the various property values for the various aging temperatures($80^{\circ}C$, $90^{\circ}C$, $100^{\circ}C$) of the padder roll, the accelerated life predictions could be calculated. The threshold value of the property was set at different values. The hardness was set at the point where 5% degradation occurs based on the actual use conditions, and the tensile strength was set at the point where 50% degradation occurs based on the general life prediction standards. From the results of the different physical properties at differing temperatures, the Arrhenius plot could be obtained. Through the usage of the Arrhenius Equation, significant duration expectation could be predicted, and the chemical aging behavior of the CPB padder roll could be found at the arbitrary and actual temperatures.

• 한국수소및신에너지학회논문집
• /
• 제24권2호
• /
• pp.179-185
• /
• 2013

The behavior of surface film formation was greatly dependent on the speed of potential cycling. In $LiClO_4$ / EC + DEC, cyclic voltammetry results showed that the peaks originated from surface film formation on graphite electrode at the high charge-discharge rate was shifted to the lower potentials as the charge-discharge rate decrease. This indicates that surface films with different morphology and thickness were formed by different charge-discharge rate. Transmission electron microscopy (TEM) results indicated that the properties such as thickness and morphology of the surface film were greatly affected by the charge-discharge rate. Electrochemical impedance spectroscopy (EIS) showed that the resistance of surface film was affected by the speed of potential cycling. In addition, the charge transfer resistance was also dependent on the charge-discharge rate indicating that the charge transfer reaction was affected by the nature of surface film. TEM and EIS results suggested that the chemical property as well as the physical property of the surface film was affected by the charge-discharge rate.

• 공업화학
• /
• 제10권5호
• /
• pp.635-638
• /
• 1999

구두용 나피(裸皮)의 물성에 가장 큰 영향을 주는 탈모 공정에 단백질 분해 효소가 미치는 영향을 연구하였다. 나피의 물성을 기존의 방법 대신 전자 현미경을 이용하여 측정하는 새로운 방법을 제시하였다. 단백질 분해 효소를 이용한 바이오-테크 처리가 화학적 처리보다 탈모율에서 약간 저하되나 나피의 물성과 환경 측면에서 우수한 것으로 나타났다. 특히, 화학적 처리시 발생하는 유해 가스인 $H_{2}S$가 전혀 발생치 않았으며, 탈모 공정의 폐수 처리시 COD 및 BOD 값이 각각 939 mg/L와 5268 mg/L로 상당량 감소하여 기존의 처리 방법들보다 환경 친화적인 방법임을 확인할 수 있었다. 따라서, 탈모 공정은 $29{\sim}30^{\circ}C$의 온도 범위에서 단백질 분해 효소인 0.4~0.5% Lupin LE-10을 첨가하여 20시간 처리하는 것이 적합하였다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.262-269
• /
• 2008

Chemical products have had an favorable influence on our everyday life, and contributed very much to the development of human culture. According to the rapid change of industry and the development of scientific technique the using chemical products are increasing more and more. Chemical products can have any hazardous property such as flammability or explosiveness. There are occurring many accidents in the international trade due to the different classification and labelling of chemicals produced in various countries. The main purpose of this work is the development of global standard test methods for the chemicals, and the classification and labelling in building block approach by means of the basic technical data. Oxidizing solids, combustible solids, spontaneously combustible materials, water-prohibitive materials, flammable liquids, self-reactive materials and oxidizing liquids have been tested. The results have been classified according to the hazard material safety regulation and the UN regulation, and summarized in a data-base.

• 한국응용과학기술학회지
• /
• 제20권1호
• /
• pp.1-7
• /
• 2003

In order to prepare a softener, alkyl imidazoline salt, fatty carbamide salt, and fatty polyamide salt were synthesized first, and then the synthesized salts were blended. The prepared softeners were applied to acrylic fibers, and then several properties were tested. As a result, the prepared softeners show good softening and lubricating properties, and they also show a little antistatic property. Through bending resistance tests and measurements of feeling change of acrylic fibers treated with the softeners, it was proved that the prepared softeners are durable softeners.

• 한국산업융합학회 논문집
• /
• 제9권2호
• /
• pp.141-145
• /
• 2006

In case of sense case manufactured by method of outage capacity, sensitivity is declined by outside effect and method of the photo electricity has a problem in transmission. therefore, packing case of composite sense should be developed to improve such a problem about influence of outside environment and its property evaluation has been performed. Mechanical property and result of analysis & test evaluation of Mat'l on aluminum die-casting(ADC 12type) Mat'l developed are as following. Tensile test piece, No. 4 of KS B 0801, has been applied to mechanical property test of Mat'l and It has been tested by method of metal mat'l tensile test(KS B 0802 : 2003). It can be found that physical property to KS(Korea Standard) is excellent. and homogeneous mechanical property appears. Test of Mat'l analysis has been performed by using OE Spectrometer, according to ASTM E 1251 : 1994 regulation. Consequently, good and homogeneous component contents classified by element to standard, except for Fe, have been obtained with coordination of Fe content as below 1.3% from composition standard of Aluminum Die-casting.

• 폴리머
• /
• 제38권4호
• /
• pp.457-463
• /
• 2014

본 연구에서는 다양한 환경에서 방사선 조사된 불소고분자 필름(PTFE, FEP, PFA, PVDF 및 ETFE)들의 화학 구조 및 물성 변화를 관찰하였다. 방사선은 $Co^{60}$ 감마선을 사용하였으며, 공기 분위기와 질소 분위기 및 진공 상태에서 조사하였다. 방사선 조사된 불소고분자 필름의 FTIR 분석을 통하여 방사선에 의해 생성된 라디칼이 공기 중 산소와 반응하여 산화반응이 진행되었음을 확인하였다. 또한 DSC를 이용하여 방사선 조사에 의해 변화되는 불소고 분자의 용융열 및 결정화도를 관찰하여 고분자 구조에 따른 절단 및 가교반응을 확인하였다. 인장 강도 실험을 통하여 방사선 조사 환경에 따른 불소고분자의 물성 변화를 관찰한 결과 공기 분위기에서 조사된 불소고분자 필름들의 기계적 물성이 현저히 떨어지는 것을 관찰하였다.