• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.251-258
• /
• 1999

A field experiment was carried out to determine the effects of chemical /mechanical treatments at mowing on the field drying rate and hay quality of rye (Secale cereale L.). The chemical drying agent/mower conditioner ($K_2CO_3$ 2%, conditioning, $K_2CO_3$ 2% + conditioning and control) were treated at different harvest stage (late boot, heading and bloom stage) for hastening hay-making in the spring of 1996. After field dry, square bales were made by hay baler, and the dry matter(DM) loss, visual estimation and nutritive value of rye hay were evaluated after storing two months. The field drying rate of rye was higher with delayed stage of harvest, and mechanical and chemical + mechanical treatment, but the effectiveness of chemical alone was very low. With mower conditioning, the duration of field dry was shortened by 1.5 to 2 days compared with control. The DM loss of rye hay was reduced by late harvest and mechanical, and chemical + mechanical combined treatment, but the efficiency by chemical alone was very low. The visual score (Ieafiness, green color, odor and softness) of hay after storing was high in mechanical and chemical + mechanical, but the score by chemical alone was very low. The nutritive value (ADF, NDF, digestibility, and relative feed value) of hay was also high with treatment of mechanical and chemical + mechanical, but the quality by chemical alone was similar compared with control. The quality of hay was very low when harvested at bloom stage. In conclusion, mower conditioning can enhance the field drying rate of rye, but the drying effectiveness of chemical drying agent was very low. The effect of chemical/mechanical combined treatment was very similar when compared with mechanical alone. Harvest at early heading to heading stage was recommended for high quality rye hay.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.522-529
• /
• 1998

This experiment was conducted to study the effects of lactic acid bacteria (LAB) inoculation either alone or in combination with cell wall degrading enzymes on the fermentation characteristics and chemical compositions of Rhodesgrass silage. Over to 1 kg of fresh Rhodesgrass sample a treatment of inoculant LAB with or without addition of an enzyme of Acremoniumcellulase (A) or Meicelase (M) or a mixture of both enzymes (AM) was applied. The treatments were control untreated, LAB-treated (application rate $1.0{\times}10^5cfu/g$ fresh sample), LAB+A 0.005%, LAB+A 0.01%, LAB+A 0.02%, LAB+M 0.005%, LAB+M 0.01%, LAB+M 0.02 %, LAB+AM 0.005%, LAB+AM 0.01%, and LAB+AM 0.02%. The sample was ensiled into 2-L vinyl bottle silo, with 9 silages of each treatment were made. Three silages of each treatment were incubated at 20, 30 and $40^{\circ}C$ for 2-months of storage period. All silages were well preserved with their fermentation quality has low pH values (3.91-4.26) and high lactic acid concentrations (4.11-9.89 %DM). No differences were found in fermentation quality and chemical composition of the control untreated silage as compared to the LAB-treated silage. Combined treatment of LAB+cellulases improved the fermentation quality of silages measured in terms of lower (p < 0.01) pH values and higher (p < 0.05) lactic concentrations than those of LAB-treated silages. Increasing amount of cellulase addition resulted in decrease (p < 0.05) of pH value and increase (p < 0.05) of lactic acid concentration. LAB + cellulase treatments (all cellulase types) reduced (p < 0.01) NDF, ADF and in vitro dry matter digestibility of silages compared with the control untreated silages. The fermentation quality and the rate of cell wall reduction were higher (p < 0.01) in the silages treated with LAB + cellulase A than in the silages treated with either LAB+cellulase M or LAB + cellulase AM. Incubation temperature of $40^{\circ}C$ was likely to be more appropriate environment for stimulating the fermentation of Rhodesgrass silages than those of 20 and $30^{\circ}C$.

• Current Photovoltaic Research
• /
• v.4 no.3
• /
• pp.124-129
• /
• 2016

Recently industry has voiced a need for optimally designing the production process of low-cost, high-quality ingots by improving productivity and reducing production costs with the Czochralski process. Crystalline defect control is important for the production of high-quality ingots. Also oxygen is one of the most important impurities that influence crystalline defects in single crystals. Oxygen is dissolved into the silicon melt from the silica crucible and incorporated into the crystalline a far larger amount than other additives or impurities. Then it is eluted during the cooling process, there by causing various defect. Excessive quantities of oxygen degrade the quality of silicone. However an appropriate amount of oxygen can be beneficial. because it eliminates metallic impurities within the silicone. Therefore, when growing crystals, an attempt should be made not to eliminate oxygen, but to uniformly maintain its concentration. Thus, the control of oxygen concentration is essential for crystalline growth. At present, the control of oxygen concentration is actively being studied based on the interdependence of various factors such as crystal rotation, crucible rotation, argon flow, pressure, magnet position and magnetic strength. However for methods using a magnetic field, the initial investment and operating costs of the equipment affect the wafer pricing. Hence in this study simulations were performed with the purpose of producing low-cost, high-quality ingots through the development of a process to optimize oxygen concentration without the use of magnets and through the following. a process appropriate to the defect-free range was determined by regulating the pulling rate of the crystals.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.2
• /
• pp.245-253
• /
• 2020

Objective: To develop the fermentation quality and chemical composition of alfalfa (Medicago sativa Lam.) silage, plants were inoculated with different lactic acid bacteria (LAB) strains at field 24 hours before harvest. Methods: The treatment groups were as follow: silage without additive as a control and inoculated with each strains of Lactobacillus brevis (LS-55-2-2), Leuconostoc citerum (L. citerum; L-70-6-1), Lactobacillus bifermentans (L. bifermentans; LS-65-2-1), Lactobacillus plantarum (L. plantarum; LS-3-3) and L. plantarum (LS-72-2). All the silages were stored at 25℃. Parameters such as pH, microorganism and volatile fatty acid contents, crude protein, neutral detergent fiber, acid detergent fiber, net gas, metabolizable energy, organic matter digestibility, dry matter intake and relative feed value were measured to determine fermentation quality, chemical compositions and relative feed value of alfalfa silages. Results: Significant differences were found among the control and treated groups in terms of pH and microorganism contents at all opening times and crude protein, net gas, metabolizable energy and organic matter digestibility of final silage. The pH values ranged from 4.70 to 5.52 for all treatments and control silage had the highest value of overall treatments at T₇₅d silages. Volatile fatty acid of silages was not influenced significantly by inoculations. However, lactic acid content of L. bifermentans (LS-65-2-1) was higher than the other treatments. The highest metabolizable energy and organic matter digestibility were recorded from L. citerum (L-70-6-1) inoculation. In addition, no significant differences were found among treatments in terms of neutral detergent fiber, acid detergent fiber, dry matter intake and relative feed value. Conclusion: Among the treated LAB isolates, L. bifermentans came into prominence especially in terms of organic acid composition and quality characters of silages.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.614-617
• /
• 2006

This study investigates the quality control and the finishability improvement properties of durable marine concrete under construct in Geo-je Ka-duk fixed link project. Below $3.5\times10^{-12}m^2/s$ chloride migration coefficient and above 40MPa compressive strength are required for the caisson structure concrete. The quality control was performed from physical-chemical analysis of raw materials to concrete test. Also, the efficiency of vibration type and action interval were tested to remove the entrapped air on the faced to form. And kinds of form and remolding agent were also tested. This paper aim to enhance the practical use of high performance concrete to construction field.

• Journal of architectural history
• /
• v.23 no.6
• /
• pp.39-46
• /
• 2014

In this study, we evaluated the chemical and physical properties of structural steel, which is the most basic material for steel structures and reinforcement concrete structures in modern period. We theorized the technical data for the research of technical history of modern heritage structures by analyzing the product system and its quality control of structural steel used in modern historical heritages. The results of this study are as follow; first, the rounded bars were used in most of modern heritage structures. But in the case of Waegwan railroad bridge, the deformed bars were used in spit of not using in Japan after the great earthquake of Kantou. Second, the structural steel was good in terms of quality control, but It has brittle properties because it was not manufactured by heat treatment process.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.940-945
• /
• 1998

Recently, serious cracking problems have been reported in this country while the process of actual massive concrete construction. he hydration heat arising from the chemical reaction of cement with water causes temperature differentials in between inside and outside of a structural member, and these temperature differentials induce thermal stresses. In this paper, we described on the practical application and quality control of the mass concrete mixed with fly-ash. This project is investigating adiabatic temperature rise test of concrete, mock-up test in the laboratory, ad B/P before placing the mass concrete in site. As a result, we can be prevent temperature cracking from the cement hydration heat of mass concrete and also can be showed up secure quality control flow chart of mass concrete.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.2
• /
• pp.43-50
• /
• 2007

The production, distribution, and consumption of Korean medicinal herbs have increased every year because of an increase of health considerations. But there are no sufficient standardization procedures in packaging and distribution systems related to these herb products. The standardization of packaging material and dimension could be a good addition for establishing proper quality control methods for Korean medicinal herbs. Medicinal herbs deteriorate under physical, chemical and biological hazards such as oxidation, textural change under high moisture content, color change by light, sanitation problems by insect invasion and contamination. Packaging standardization with proper functional packaging materials is critical to ensure the qualities of medicinal herbs. Also, storage and distribution efficiencies can be improved by achieving packaging dimension standardization. This review summarizes recent research trends related to quality evaluation methods and major quality deterioration factors of Korean medicinal herbs. This paper also offers reviews on some of problems and challenges in current packaging and distribution systems of medicinal herb industries and briefly suggests advanced quality control methods through packaging standardization.

• Environmental Engineering Research
• /
• v.25 no.3
• /
• pp.409-417
• /
• 2020

Investigation was carried out to assess the effect of cement dust deposition on the physico-chemical properties of soil near some cement plants in Jaintia Hills, Meghalaya. Soil samples were collected and analysed and compared with the control site. Comparison of various soil physico-chemical parameters revealed that cement dust emanating from cement plants has changed the soil quality in the surrounding areas of cement plants. The normal soil pH in the area is generally acidic. However, due to the continuous deposition of cement dust soil pH was found slightly alkaline near the cement plants. The higher values of soil parameters such as electrical conductivity and bulk density were also noticed near the cement plants. However, lower values of water holding capacity, soil moisture content, soil organic carbon and total nitrogen content were found compared to the control sites. The effect of cement dust deposition on soil is more in areas nearer to the cement plants. At present the changes may not be so serious but if this trend continues, soil properties of a vast area around the cement plants are likely to change leading to multiple effects on flora, fauna and socio-economy of the area.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1163-1168
• /
• 2006

Manufacturing technology for the production of high value-added fine chemical products is emphasized and getting more attention as the diversified interests of customers and the demand of high quality products are getting bigger and bigger everyday. Thus, the development of advanced batch processes, which is the preferred and most appropriate way of producing these types of products, and the related technologies are becoming more important. Therefore, high-precision batch distillation is one of the important elements in the successful manufacturing of fine chemicals, and the importance of the process operation strategy with quality assurance cannot be overemphasized. Accordingly, proposing a process structure explanation and operation strategy of such processes including batch processes and batch distillation would be of great value. We investigate optimal operation strategy and production planning of multi-purpose plants consisting of batch processes and batch distillation for the manufacturing of fine chemical products. For the short-term scheduling of a sequential multi-purpose batch plant consisting of batch distillation under MPC and UIS policy, we proposed a MILP model based on a priori time slot allocation. Also, we consider that the waste product of being produced on batch distillation is recycled to the batch distillation unit for the saving of raw materials. The developed methodology will be especially useful for the design and optimal operations of multi-purpose and multiproduct plants that is suitable for fine chemical production.