• 한국축산시설환경학회지
• /
• 제11권1호
• /
• pp.61-70
• /
• 2005

본 실험은 남은 음식물에 유기성 부산물인 육계분, 제과부산물, 밀기울, 맥강 등을 주요 수분흡수제 또는 영양 보충제로 혼합한 후 rotary drum 방식을 이용하여 양돈 사료화 하는데 있어서 이상적인 배합비 도출을 위한 공정단계별 사료의 영양적 flow를 4차 시험에 걸쳐서 추적하였다. Rotary dm 방식을 이용한 살균 및 숙성 과정을 거치면서 영양소의 변화 폭은 매우 낮았으며, 살균 및 숙성 처리 후의 건물 손실율은 $8{\~}15\%$ 수준이었다. 시험별로 영양소 변화는 혼합되는 사료 원료의 종류에 따라 다르게 나타났다. 남은 음식물, 퇴적발효육계분, 제과부산물, 맥강의 최적 혼합 비율은 45: 10: 22.5:22.5 이었고, 이때 사료간의 뭉쳐지는 현상을 극복할 수 있었다. 결과적으로 rotary durm 방식으로 살균하고, 숙성한 남은 음식물 혼합물은 양돈 사료로서의 충분한 사료 영양적 가치가 있었다.

• Environmental Engineering Research
• /
• 제19권1호
• /
• pp.47-57
• /
• 2014

The aim of this paper was to study the effect of five different waste combinations (C/N 15, C/N 20, C/N 25, C/N 30, and control) of sewage sludge coupled with sawdust and cattle manure in a pilot scale rotary drum reactor, during 20 days of the composting process. Our results showed that C/N 30 possesses a higher temperature regime with higher % reduction in moisture content, total organic carbon, soluble biochemical oxygen demand and chemical oxygen demand; and higher % gain in total nitrogen and phosphorus at the end of the composting period implying the total amount of biodegradable organic material is stabilized. In addition, $CO_2$ evolution and oxygen uptake rate decreased during the process, reflecting the stable behavior of the final compost. A Solvita maturity index of 8 indicated that the compost was stable and ready for usage as a soil conditioner. The results indicated that composting can be an alternate technology for the management of sewage sludge disposal.

• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.69-75
• /
• 2012

Composting of water hyacinth, mixed with cattle manure, rice husk and sawdust in four different proportions, was performed in a pilot scale rotary drum composter. The physico-chemical characteristics, i.e., temperature, moisture content, pH, electrical conductivity, total organic matter (OM), nitrogen dynamics and nutrients were evaluated during the 20 days composting process. The stabilities of the composts were also investigated with respirometric analysis, i.e., $CO_2$ evolution rates and oxygen uptake rate (OUR). Among all trials, trial 1 (6 water hyacinth, 3 cattle manure, 1 rice husk) indicated the best composting mix, as shown by the highest temperature profile and OM loss, and lowest $CO_2$ evolution rate and OUR.

• 한국의류학회지
• /
• 제30권11호
• /
• pp.1589-1597
• /
• 2006

Nowadays, Korean consumers prefer drum-type washing machines to pulsator-type washers. Washing is a complex process involving the interaction of numerous physical and chemical influences. The main factors in the washing operations are the washing chemistry of the detergent along with the mechanical input, the wash temperature, and the time provided by the washing machine. Heavy-duty detergents that are used in drum-type washing machines contain different components from those used in vertical-axis washing machines. The bath ratio and the mechanical actions to which laundry is subjected are different between the drum-type and the vertical-axis washing machines. In this study we examined the effects of wash temperature, wash time, detergent concentration, and revolution speed on the removal of soils from artificially soiled cloths in a drum-type washing machine with heavy-duty commercial detergent. We used multiple regression analyses to find the relative importance of the factors and the optimum washing conditions. The results of these experiments showed that the washing temperature was the most important factor in the effective removal of most soils. This was followed by the washing time, the detergent concentration, and finally the revolution speed. In this study it was found that superfluous amounts of detergent did not sufficiently increase the soil removal rate. Koreans who are used to washing with cold water should increase the wash time to launder more efficiently.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.48-55
• /
• 2015

A variety of safety issues were investigated for chemical reactors using a toluene solvent in case of a fire at small to middle scale chemical plants. The issues covered the operation of pressure-relieving valves and the subsequent discharges of the toluene to the atmosphere either directly or through an absorber, which represent the current practice at most small chemical plants. It was shown that the safety valve on the reactor may not operate within about twenty minutes after an external fire breaks out, but, once relieved, the toluene vapor released directly to the atmosphere may form a large explosion range on the ground. It was also shown that if the discharge is routed to an existing absorber used for the scrubbing of volatile organic compounds or dusts, the column may not operate normally due to excessive pressure drops or flooding, resulting in the hazardous release of toluene vapors. This study proposed two ways of alleviating these risks. The first is to ruduce the discharge itself from the safety valve by using adequate insulation and protection covers on the reactor and then introduce it into the circulation water at the bottom of the absorber through a dip linet pipe equipped with a ring-shaped sparger. This will enhance the condensation of toluene vapors with the reduced effluent vapors treated in the packing layers above. The second is to install a separate quench drum to condense the routed toluene vapors more effectively than the existing absorber.

• 한국식품과학회지
• /
• 제27권3호
• /
• pp.394-403
• /
• 1995

밀기울의 각종 열처리에 따른 밀기울의 화학적 구조 및 기능특성의 변화를 연구하였다. 사용한 열처리의 종류는 toasting, roasting, drum drying, autoclaving+drum drying, microwaving+drum drying, extrusion이였다. 열처리 공정에 의하여 가장 뚜렷한 차이를 보인 것은 수용성 식이섬유의 함량으로서 원료밀기울에 비하여 약 $40{\sim}110%$의 수용성 식이섬유가 증가하였다. 반면에 상대적으로 불용성 식이섬유의 함량도 감소하기 때문에 총 식이섬유 함량은 큰 차이를 보이지 않았다. 또한, 열처리에 의하여 용해도와 보수적이 증가한 반면에 보유력은 오히려 감소하는 경향을 보였다. 용적밀도와 팽화도는 각각 보수력과 밀접한 관계를 보이지 않았으나, 이들의 곱은 보수력과 높은 상관관계$(R^2=0.94)$를 보였다. 그러나 수용성 성분을 배제한 불용성 성분의 보수력은 용적밀도와 팽화도와의 곱에도 거의 상관관계를 보이지 않았다. 주사전자현미경에 의한 밀기울의 외형적 구조변화에 대한 관찰은 열처리에 따른 밀기울의 화학적 및 기능적 특징에 대한 결과를 잘 반영해주었다.

• 한국압력기기공학회 논문집
• /
• 제7권4호
• /
• pp.26-30
• /
• 2011

In order to ship low & Intermediate level radioactive waste drums, which have been temporarily stored on site, to a disposal facility, their physical and chemical properties should be evaluated and proven to meet the acceptance guideline prior to their shipment. Ultrasonic velocity method, which has been used to estimate the strength of concrete, can be suggested to evaluate the compressive strength of solidified radioactive waste, which is one of the evaluated properties. The strength is estimated from acoustic velocity. However, a guided wave traveling along a drum is generated when applying ultrasonic method to the drum, and this makes it difficult to analyze the signal due to overlap between transmitted wave through the contents in drum and the guided wave. This paper reported feasibility of ultrasonic method to evaluate of the compressive strength of the solidified LLW. It is observed that the guide wave is greater than transmitted wave, and ultrasonic velocity could be estimated from transmitted wave signal arriving prior to the guided wave

• Journal of Microbiology and Biotechnology
• /
• 제23권3호
• /
• pp.335-342
• /
• 2013

In this study, we compared the performance of two control systems, fuzzy logic control (FLC) and conventional control (CC). The control systems were applied for controlling temperature and substrate moisture content in a solidstate fermentation for the biosynthesis of amylase and protease enzymes by Aspergillus oryzae. The fermentation process was achieved in a 200 L rotating drum bioreactor. Three factors affecting temperature and moisture content in the solid-state fermentation were considered. They were inlet air velocity, speed of the rotating drum bioreactor, and spray water addition. The fuzzy logic control system was designed using four input variables: air velocity, substrate temperature, fermentation time, and rotation speed. The temperature was controlled by two variables, inlet air velocity and rotational speed of bioreactor, while the moisture content was controlled by spray water. Experimental results confirmed that the FLC system could effectively control the temperature and moisture content of substrate better than the CC system, resulting in an increased enzyme production by A. oryzae. Thus, the fuzzy logic control is a promising control system that can be applied for enhanced production of enzymes in solidstate fermentation.

• 펄프종이기술
• /
• 제43권4호
• /
• pp.59-66
• /
• 2011

This study was carried out to develop the automation bark peeling process of paper mulberry for making Hanji. Nowadays, almost raw material has been imported from south-east asia for making Hanji. Raw material dependence is very high for Hanji-making by low productivity in korea. This study is focused on the resolution for problem of bark peeling automation. Water and sand jet of compressed air was possible bark peeling for black bast fiber. The effect of removing black bast fiber increased the longer the steaming time. Also using drum of bark peeling showed that results under temperature $80^{\circ}C$ and Rpm 50/min were best bark peeling and separating bast fiber from stem. The contents of holocellulose, lignin, ethanol-benzene extractives, and ash were 91.63~95.55%, 1.4~2.0%, 1.12~1.65%, and 1.4~4.3%, respectively. Chemical characteristics are similar between imported raw-material with drum bark.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.83-87
• /
• 2002

Aerospace industries are widely using honeycomb sandwich structures that it has high specific strength and stiffness, chemical material resistance and fatigue resistance. But, in repairing process of damaged areas, one of the problems is that delamination can be occurred in the sound areas during and/or after the exposure to the elevated curing temperature in case that the repair process is repeated. Therefore, this study was conducted Flatwise tensile, Drum peel and Long beam flexural strength tests to evaluate the degree of degradation of mechanical properties of the honeycomb sandwich structures by affecting thermal aging. As the results, the decrease of mechanical strength was observed at the specific specimen which is exposed over 50hrs at $127^{\circ}C$.