• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.256-263
• /
• 2010

The paper proposes a sensorless speed control strategy for a PMSM (Permanent Magnet Synchronous Motor) based on a new SMO (Sliding Mode Observer), which substitutes a signum function with a sigmoid function. To apply robust sensorless control of PMSM against parameter fluctuations and disturbance, the high speed SMO is proposed, which estimates the rotor position and angular velocity from the back EMF. The low-pass filter and additional position compensation of the rotor are used to reduce the chattering problem commonly found in sliding mode observer with signum function, which becomes possible by applying the sigmoid function with the control of a switching function. Also the proposed sliding mode observer with the sigmoid function has better efficiency than the conventional sliding mode observer since it adjusts the observer gain by variable boundary layer and estimates the stator resistance. The stability of the proposed sliding mode observer is verified by the Lyapunov second method in determining the observer gain. The validity of the proposed high speed PMSM sensorless velocity control has been demonstrated by real experiments.

• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.249-255
• /
• 2010

The paper proposes a new type of robust speed control strategy for permanent magnet synchronous motor by using PD-sliding mode hybrid control. The PD control has a good performance in the transient region while the sliding mode controller provides the robustness against system uncertainties. Taking advantages of the two control strategies, the proposed control method utilizes the PD control in the approaching region to the sliding surface and the sliding mode control near at the sliding surfaces. The chattering problem of the sliding mode controller is eliminated by applying the saturation function for the switching function of the sliding mode control. The stability of the sliding mode control is verified by using Lyapunov function with the proper selection of variable gains. It is shown that with this simple switching algorithm, stability of the overall hybrid control system is ensured. Through the simulations, the PD-sliding mode algorithm is shown to have a good performance in the transient response as well as being robust against disturbances. The robustness of the PD-sliding mode algorithm is further demonstrated against various external disturbances in the real experiments of SPMSM motor control.

• 전자공학회논문지SC
• /
• 제42권6호
• /
• pp.1-8
• /
• 2005

슬라이딩 모드 제어기의 성능을 향상시키기 위해서 새로운 프로세스 모델의 파라미터 계산을 제안하였다. Camacho가 제안한 방법은 시간 지연항을 1차 Taylor 급수로 근사화하는 과정에서 발생되는 근사 오차에 의한 오버슈트, 정착시간 등에 문제점이 발생하였다. 본 논문에서는 이러한 문제점을 해결하기 위해 가중치를 고려한 변형된 파데 근사 방법과 이를 토대로 한 새로운 슬라이딩 모드 제어기의 동조 방법을 제안하였다. 제안된 방법은 프로세스 응답을 복잡한 수치적 과정없이 온라인으로 직접 동조 파라미터를 구할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.65-66
• /
• 2007

본 논문은 파라미터 변동에 잘 적응하며 강인한 영구자석 동기전동기의 위치센서 없는 센서리스 제어를 위해 개선된 슬라이딩 모드 관측기에 고정자 저항 추정기능을 추가한 새로운 슬라이딩 모드 적응 관측기를 제안한다. 제안된 관측기는 개선된 슬라이딩 모드 관측기를 사용함으로써 기존의 슬라이딩 모드 관측기에서 채터링(Chattering) 문제 해결을 위해 저역통과필터(Low-pass filter)의 사용 및 추가적인 회전자의 위치보상은 Sigmoid 함수를 스위칭 함수로 사용하므로 제거 할 수가 있다. 또한 고정자 저항 추정기능을 추가하여 센서리스 운행 중 환경적 요인으로 인한 고정자 저항값의 변동이나 초기에 고정자 저항값을 잘못 알고 있더라도 빠른 적응을 통해서 추정오차를 절감시켜 전동기의 속도추정 성능을 향상시킬수 있다. 또한 기존의 적응 슬라이딩 모드 관측기에서의 적분연산을 줄임으로써 제어시스템의 성능을 개선시켰다 제안된 관측기의 안정성은 Lyapunov 후보 함수를 이용하여 관측기의 이득을 설정함으로써 검증하였으며 관측기의 성능은 시뮬레이션을 통한 실험을 통하여 그 타당성을 입증하였다.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.159-166
• /
• 2013

In order to develop the optimum shape of an MQL carbide end-mill suitable for high speed machining of wing ribs which are a detailed part of larger wing structures, using a new material Al-Li alloy, a new MQL carbide end-mill is created that has various quantities of holes, hole sizes, and hole locations. A theoretical machining graph is generated using the hammer test and FRF simulation, and a machining test is performed in order to verify the machining stability in the high speed machining area. The optimum configuration of the MQL carbide end-mill is also presented through comparing the chattering, machining noise and cutting conditions, including the maximum cutting depth, rpm, and feed rate per teeth, for each cutter.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.15-20
• /
• 2017

This study analyzed the load change of the gear generated by the operation of the vehicle recliner through Finite Element Analysis. The basic model of the recliner used was a commercial product, and the effect of the seat frame was excluded. The load conditions applied to the recliner were set considering gravity, the mass of the seat's back frame, and the weight of a person. The operating mode was set to move the seat back from the vertical to the reclined position. As a result, it was found that the tooth bending amount of the gear rim and wheel increased from the cam rotation angle of 450 degrees, and a change in the contact ratio occurred. Furthermore, excessive torque fluctuations occurred in the ranges of 390 to 450 and 750 to 710 degrees. It was found that this occurred in the region of about 30 degrees before and after the point where the x-axis direction load is larger than the y-direction load. From this torque fluctuation it was determined to likely to cause chattering noise.

• International Journal of Ocean System Engineering
• /
• 제3권2호
• /
• pp.50-60
• /
• 2013

This paper presents a novel approach to the design of an adaptive fuzzy sliding mode controller for depth control of an autonomous underwater vehicle (AUV). So far, AUV's dynamics are highly nonlinear and the hydrodynamic coefficients of the vehicles are difficult to estimate, because of the variations of these coefficients with different operating conditions. These kinds of difficulties cause modeling inaccuracies of AUV's dynamics. Hence, we propose an adaptive fuzzy sliding mode control with novel fuzzy adaptation technique for regulating vertical positioning in presence of parametric uncertainty and disturbances. In this approach, two fuzzy approximator are employed in such a way that slope of the linear sliding surface is updated by first fuzzy approximator, to shape tracking error dynamics in the sliding regime, while second fuzzy approximator change the supports of the output fuzzy membership function in the defuzzification inference module of fuzzy sliding mode control (FSMC) algorithm. Simulation results shows that, the reaching time and tracking error in the approaching phase can be significantly reduced with chattering problem can also be eliminated. The effectiveness of proposed control strategy and its advantages are indicated in comparison with conventional sliding mode control FSMC technique.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1474-1482
• /
• 2018

As an essential means of generator voltage regulation, excitation control plays an important role in controlling the stability of the power system. Therefore, the reasonable design of an excitation controller can help improve the system stability. In order to raise the robustness of the generator exciting system under outside interference and parametric perturbation and eliminate chattering in the sliding mode control, this paper presents a generator excitation control based on the quasi-sliding mode pseudo-variable structure control. A mathematical model of the synchronous generator is established by selecting its power, speed and voltage deviation as state variables. Then, according to the existing conditions of the quasi-sliding mode, a quasi-sliding mode pseudo-variable structure controller is designed, and the parameters of the controller are obtained with the method of pole configuration. Simulations show that compared with the existing methods, the proposed method is not only useful for accurate voltage regulation, but also beneficial to improving the robustness of the system at a time when perturbance happens in the system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.52-54
• /
• 1996

A number of algorithm using the VSS(Variable Structure System) for uncertain dynamic system are developed. But, in these algorithms, the assumption that the uncertainties are bounded and their bounds are available to the designer is involved. And bounds on the uncertainties are an important clue to guarantee the stability of the closed loop system. However, sometimes bounds on the uncertainties may not be easily obtained because of the complexity of the structure of the uncertainties. Therefore, a methodology by which the boundary values on the uncertainties can be easily obtained is required. The VSS proposed in this proposal employ the new adaptive VSS scheme for uncertain dynamic system being estimated on line. The resulting control law is simple and easy to apply to on line computer control. It can also suppress chattering and maintain good tracking precision even if unmodeled dynamics are considered. And, a new method using nonlinear switching surface is introduced so that the speed response is improved and the good transient response can be obtained. Simulation results are presented and show the advantage of the proposed adaptive VSS with nonlinear switching surfaces.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.57-60
• /
• 1993

This study suggests a dynamic braking control algorithm in order to improve the transient stability of a multimachine power system. Dynamic braking control has been known as an effective method by which transient stability of power systems could be improved. Under the context, the study suggests a modified MRVM which possibly handles more rapid on-line computation through the improvement of the conventional MRVM(Model Referenced Velocity Matching). In order to resolve the phenomenon of stability recovery hinderance due to the prolonged dynamic braking control under the stable equilibrium state and chattering problem, the study also composes an algorithm in such a way that dynamic braking control could be prohibited by setting-up absolute stability region, Lastly, a comparison with the results derived from the application of the conventional control technique to the model power system is made in order to prove the superiority of the suggested control technique.