• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.264-269
• /
• 1998

A proposed soft-switching buck-boost PWM converter has a lot of advantages, Viz., electric isolation, a high power factor, low switching losses, low EMI noise, reduction of the voltage and current stresses, etc. In a new PFC converter, the switching device is replaced by the loss-less snubber circuit to achieve the zero voltage switching (ZVS) at the maximum current. However, the charging current of the capacitor in the loss-less snubber circuit distorts the input current waveforms. To improve the input current waveform, a new duty factor control method is proposed in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1816-1818
• /
• 1997

A triggered sparkp gap switch was fabricater and its high-voltage discharge characteristics were studied. The switch is composed of two main electrodes and one trigger electrode which is placed perpendicular to the main one. Spark gap distance was fixed by 25 mm. This device has been operated without self firing at the pulse repetition frequency from 1 to 20 Hz limited by the charging current, and the hold-off voltage from 10 to 30kV. An IGBT switch and igniter coil (originally used in a car) were adopted for a trigger circuit. In this article preliminary switch characteristics of the spark gap switch are reported with the emphasis on the description of the trigger circuit.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1582-1585
• /
• 2009

The effects of bias stress on spin-coated zinc tin oxide (ZTO) transistors are investigated. Applying a positive bias stress results in the displacement of the transfer curves in the positive direction without changing the field effect mobility or the subthreshold behavior. Device instability appears to be a consequence of the charging and discharging of temporal trap states at the interface and in the zinc tin oxide channel region.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.205-206
• /
• 2010

This paper presents a study on the efficiency of DC-DC converter to charge/discharge lithium battery. The losses of switching device, magnetic components, output capacitor, diode, and snubber circuit are analyzed by considering the charge/discharge characteristics of the converter. Based on the loss analyses, efficiency simulation in charging/discharging process are performed.

• 한국시뮬레이션학회논문지
• /
• 제8권3호
• /
• pp.67-76
• /
• 1999

The study of the optimization of operating policy of AGV system, which is used in many factory automation environments has been proceeded by many researchers. The major operating policy of AGV system consists of routing and scheduling policy. AGV routing is composed with collision avoidance and minimal cost path find algorithm. To allocate jobs to the AGV system, AGV scheduling has to include AGV selection rules, parking rules, and recharging rules. Also in these rules, the key time parameters such as processing time of the device, loading/unloading time and charging time should be considered. In this research, we compare and analyze several operating policies of multiple loop-multiple AGV system by making a computer model and simulating it to present an appropriate operating policy.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.919-926
• /
• 2021

In this paper, a study was conducted on the miniaturization of an e-Mobility battery charger module using GaN-FET. GaN-FET is one of the types of WBG devices, and it is a device that exceeds the performance of existing Si power semiconductors. In particular, GaN-FET has the advantage of small packaging size and high switching frequency operation, which is advantageous for miniaturization of power converters. Therefore, a bidirectional DC/DC converter module for e-mobility charging using GaN-FET was developed. To apply to the converter to be developed, analysis is performed on the characteristics of GaN-FET, and after manufacturing a prototype of a bidirectional DC/DC converter module, the efficiency and temperature data of the power converter are analyzed to verify its feasibility.

• 한국전자통신학회논문지
• /
• 제15권3호
• /
• pp.495-502
• /
• 2020

본 논문에서는 자기 에너지 하베스트를 이용하여 지하 공동구의 비상조명 LED를 구동하는 전력관리 회로를 설계하였다. 자기 에너지 하베스트는 하베스터 소자와 전력관리 회로로 구성되어 진다. 제안하는 회로는 정류기, 배터리 충전회로와 LED 구동회로로 만들어졌다. 평상시에는 만들어진 전력으로 배터리를 충전하고, 비상시에는 배터리에 충전된 에너지를 이용하여 LED를 구동한다. 측정 결과, 47 mF 커패시터를 충전하는 데 2분이 걸렸다. 이것은 약 3분 30초 동안 비상조명용 LED를 구동할 수 있는 전력량이다. 이를 통해, 본 논문에서 제안하는 자기 에너지 하베스트용 전력관리 회로를 이용하여 별도의 전원을 끌어오기 어려운 지하 공동구의 비상조명 LED 구동용 전원장치로 사용할 수 있는 것을 확인하였다.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1280-1287
• /
• 2019

계통 연계 형 양방향 PCS 기술은 분산 형 신재생 에너지 스마트 그리드를 구현하기 위한 기술이며, 방대한 스마트 그리드 시스템 중 태양광 모듈로부터 수집된 전력 및 상용 계통전원을 이용하여 상시 전력을 충전하였다가 필요시 저장된 전력을 저압 계통 측으로 방출할 수 있도록 하는 하이브리드형 에너지 저장 장치이다. 이를 위해 MPPT 기능이 포함된 PV입력 전력변환기와 배터리 충·방전을 위한 양방향 전력변환기 및 DC Link 전압을 3상 380V AC 계통으로 출력하고 필요할 경우 계통전력을 AC/DC변환하여 양방향 DC/DC컨버터를 통해 배터리로 충전기능을 수행하는 인버터로 구성된 3개의 전력변환기 구조를 갖는 PCS를 설계 및 개발하였다. 현재 이 시스템을 정전 및 화재사고에 취약한 제주의 사이트에 적용하여 실증 및 운영하고 있다.

• 산업기술연구
• /
• 제40권1호
• /
• pp.13-18
• /
• 2020

Lithium-ion batteries have a small volume, light weight and high energy density, maximizing the utilization of mobile devices. It is widely used for various purposes such as electric bicycles and scooters (e-Mobility), mass energy storage (ESS), and electric and hybrid vehicles. To date, lithium-ion batteries have grown to focus on increasing energy density and reducing production costs in line with the required capacity. However, the research and development level of lithium-ion batteries seems to have reached the limit in terms of energy density. In addition, the charging time is an important factor for using lithium-ion batteries. Therefore, it was urgent to develop a high-speed charger to shorten the charging time. In this thesis, a discharger was fabricated to evaluate the capacity and characteristics of Li-ion battery pack which can be used for e-mobility. To achieve this, a smart discharger is designed with a combination of active load, current sensor, and temperature sensor. To carry out this thesis, an active load switching using sensor control circuit, signal processing circuit, and FET was designed and manufactured as hardware with the characteristics of active discharger. And as software for controlling the hardware of the active discharger, a Raspberry Pi control device and a touch screen program were designed. The developed discharger is designed to change the 600W capacity battery in the form of active load.

• 전자공학회논문지
• /
• 제52권6호
• /
• pp.43-49
• /
• 2015

본 논문에서는 모바일 기기의 배터리 무선 충전을 위해 효율이 향상된 자기공진방식 무선전력전송 시스템을 제시한다. 전송 효율의 향상과 소형화를 위해 HFSS를 이용한 전자기 시뮬레이션을 통해 공진기 구조를 설계 및 제작하였다. 입력 임피던스와 출력 임피던스 차이에 의한 반사를 줄이기 위해 임피던스 매칭 네트워크를 적용하였다. 모바일 기기의 배터리 충전을 위해 $0.35{\mu}m$ BCD 공정을 이용하여 정류회로와 레귤레이터를 포함하는 전력수신 칩을 설계하였다. 무선전력전송 시스템 효율은 최대 75.1%를 보였으며 시스템 검증을 위한 실험에서 최대 70cm거리에서 상용화된 휴대폰 배터리(3.7V, 6.11Wh, 1680mAh)를 부하로 사용하여 충전을 확인하였다.