• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.40-48
• /
• 2015

In this paper, battery charging and discharging circuit with a single voltage power supply is proposed. The proposed circuit has the separated current path and charging-monitoring sequence control scheme. In the charging sequence, the proposed 2-level comparator combined with control signal of the micro-processor can control the constant charging current to protect the over current of the battery. Furthermore, the proposed circuit uses a periodic main power switch control to detect the discharging characteristics to estimate the approximated battery life-time. In the experiments, the proposed emergency power supply for emergency call system has 89% efficiency with 98% power factor. And the proposed sequence control scheme is well operated in the designed emergency power system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.71-76
• /
• 2001

An electret filter is composed of permanently charged electet fibers and is widely used in applications requiring high collection efficiency and low-pressure drop. In this work, the collection efficiency of the filter media used in manufacturing cabin air filters was investigated by using poly-disperse particles when submicron particles are loaded. Long-term experiments were conducted by applying different charging states, which are spray electrification and charge equilibrium by bipolar ionization. In order to investigate on the effect of particle loading in filter media, NaCl particles were generated from 0.1% and 1% solutions by an atomizer. In NaCl 0.1%, the collection efficiency of electret filter decreased and then did not change in equilibrium state. In the case of relative larger particles of NaCl 1%, collection efficiency for the equilibrium charged particles increases due to the particle loading on the filter fibers. Particles charged by spray electrification are small in collection efficiency after equilibrium state and increase of filter media's pressure drop was very low in comparison of the equilibrium charged particles.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.669-674
• /
• 2017

화석 연료의 고갈 및 환경오염의 증가로 인하여 전기 에너지를 사용하는 전기 자동차가 차세대 교통수단으로 주목받고 있으며 전 세계적으로 인기를 끌고 있다. 전기 자동차의 보급률 및 관심이 높아짐에 따라 V2G (Vehicle to Grid) 및 IT 기술을 이용한 충전 인프라에 대한 연구가 활발히 진행되고 있다. 특히, 전기 자동차의 안정적인 충전 및 부하 관리를 위하여 그리드 네트워크와의 통신은 가장 중요한 요소이다. 그러나 기존의 중앙 집중형 인프라 구조의 경우 제어 메시지 요청이 증가할 경우 느린 응답속도로 인하여 충전 인프라가 효율적으로 작동하지 못하는 문제점들이 존재한다. 본 논문에서는 분산형 클라우드 컴퓨팅 기술을 무선 기지국에 적용하여 충전 인프라에 혼잡을 줄이고 지연시간을 줄이기 위해 MEC (Mobile Edge Computing)를 활용한 새로운 전기자동차 충전 인프라 구조를 제안한다. 성능 평가를 통해 본 논문에서 제안한 저 지연시간을 가지는 충전 인프라가 기존에 존재하는 충전 인프라보다 효율적으로 전력 피크 상황에 대처함을 확인하였다.

• 한국대기환경학회지
• /
• 제15권4호
• /
• pp.463-473
• /
• 1999

The main purpose of this study is to investigate the characteristics of precharge electro-cyclone compared to those of innercharge electro-cyclone, experimentally. Especially, the experiment is executed focusing on the improvement of collection efficiency with the charging types including the experimental parameters such as the discharge electrode shapes, applied voltages and gas inlet velocities. Results show that the overall collection efficiency of precharge electro-cyclone is increased over 20% than that of the innercharge type for the same discharge electrode(ø 4 mm, screw rod) in the inlet velocity of 4 m/s, and applied voltage of 30kV. Moreover, the pressure drop of precharge type becomes 10% lower than that of the innercharge type for the inlet velocity of 12 m/s owing to the disturbance of inner vortex flow by the discharge electrode equipped in the center region of cyclone body.

• Journal of Power Electronics
• /
• 제5권3호
• /
• pp.206-211
• /
• 2005

Conventional switched capacitor converters have an inherent drawback that their efficiency decreases as the output current increases. This inherent drawback is due to a periodical forced charging and discharging operation in the internal switched capacitors accompanied by a large capacitor current. Their efficiency can not be increased by decreasing its internal resistance. As a result, conventional switched capacitor converters have been limited to uses with a very small output current. To solve this problem we presented a novel switched capacitor converter topology that uses a resonant operation instead of the forced charging and discharging operation. Its advantage over a conventional switched capacitor converter is higher efficiency even in a high output current region. In this paper, the operation analysis and steady-state characteristics are described in detail for a half buck type switched capacitor converter, and they are confirmed by experimentation.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.275-280
• /
• 2013

본 논문은 무선 충전 시스템의 최적화 기법에 대한 것으로서, 특히 캡슐형 내시경 응용을 위한 회로를 기반으로 한다. 이 논문에서는 저용량 배터리를 내장하는 무선 충전 시스템에서 전자기 유도 원리를 이용한 방식을 적용하여 배터리 용량을 필요 이상으로 증가시키지 않는 상태에서 여러 가지 상황에 대응하여 무선 전력 전송의 효율을 최적화하는 것을 목표로 하였다. 전자기 공진 코일의 무선 전력 전송의 효율을 증가시키기 위하여 전력 전송의 주요 결정 요소를 분석하고 주파수 제어에 의한 효율 최적화를 시도하였다. 모의실험 결과 제안된 최적화 기법은 무선 충전 효율을 안정화시키고 현재 문제가 되고 있는 거리 및 기생 성분에 의한 전송 효율 변이를 효과적으로 개선하는 것을 확인하였다.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.870-879
• /
• 2011

Regulated peak power tracking (RPPT) systems such as the series structure and the series-parallel structures are commonly used in satellite space power systems. However, these structures process the solar array power or the battery power to the load through two cascaded regulators during one orbit cycle, which reduces the energy transfer efficiency. Also the battery charging time is increased due to placement of converter between the battery and the solar array. In this paper a parallel structure has been proposed which can improve the energy transfer efficiency and the battery charging time for satellite space power RPPT systems. An analogue controller is used to control all of the required functions, such as load voltage regulation and solar array stabilization with maximum power point tracking (MPPT). In order to compare the system efficiency and the battery charging efficiency of the proposed structure with those of a series (conventional) structure and a simplified series-parallel structure, simulations are performed and the results are analyzed using a loss analysis model. The proposed structure charges the battery more quickly when compared to the other two structures. Also the efficiency of the proposed structure has been improved under different modes of solar array operation when compared with the other two structures. To verify the system, experiments are carried out under different modes of solar array operation, including PPT charge, battery discharge, and eclipse and trickle charge.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2010년도 춘계학술대회 논문집
• /
• pp.612-613
• /
• 2010

• 정보보호학회논문지
• /
• 제26권4호
• /
• pp.941-951
• /
• 2016

화석 연료의 사용이 문제가 되고 있는 상황에서, 고효율 전기 엔진의 등장은 전기 자동차 개발을 가속화시켰다. 하지만 전기 자동차의 개발 비용을 줄이기 위해 소형 베터리를 사용한 결과 충전 빈도가 잦아져 불편을 유발하게 되었다. 이동식 무선충전 기술이 해결책으로서 활용될 수 있지만, 충전의 빈도가 잦아지면 사용자의 위치정보를 노출하게 되는 문제점이 존재한다. 본 논문에서는 전기 자동차의 무선충전 기반시설을 제안하고, 이때 발생할 수 있는 보안이슈에 대해 분석한다.

• Journal of Electrical Engineering and Technology
• /
• 제1권4호
• /
• pp.520-527
• /
• 2006

The electrical discharge and operational characteristics of needle and wire-cylinder corona charger based on current measurements for positive and negative coronas were evaluated and compared. A semi-empirical method was used to determine the ion concentrations in the charging zone and at the outlet of both chargers. Results from experimental investigation revealed that magnitudes of the charging current from the wire-cylinder charger were approximately 3.5 and 2 times smaller than those from the needle charger for the positive and negative coronas, respectively. The ion number concentrations at the outlet for positive corona of both chargers were higher than fur negative corona at the same voltage. Flow and electric fields in the charging zone of both chargers were also analyzed via numerical computation. Strong electric field strength zone was identified and led to high charging and particle deposition. Effect of particle deposition on the evolution of discharge current was presented. It was shown that ions loss inside the wire-cylinder charger was higher than the needle charger The particle deposited on the corona electrodes and on the grounded cylinder caused a great reduction in charging efficiency of both chargers.