• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.305-312
• /
• 2011

A primary interest of this work is to develop an efficient and powerful repetitive pulser system for the application of ultra wide band generation. The important component of the pulser system is a small-sized coaxial type spark gap with planar electrodes filled with SF6 gas. A repetitive switching action by the coaxial spark gap generates two consecutive pulses in less than a microsecond with rise times of a few hundred picoseconds (ps). A set of several parameters for the repetitive switching of the spark gap is required to be optimized in charging and discharging systems of the pulser. The parameters in the charging system include a circuit scheme, circuit elements, the applied voltage and current ratings from power supplies. The parameters in the discharging system include the spark gap geometry, electrode gap distance, gas type, gas pressure and the load. The characteristics of the spark gap discharge, such as breakdown voltage, output current pulse and recovery rate are too dynamic to control by switching continuously at a high pulse repetition rate (PRR). This leads to a low charging efficiency of the spark gap system. The breakthrough of the low charging efficiency is achieved by a parallel operation of two spark gaps system. The operational behavior of the two spark gaps system is presented in this paper. The work has focused on improvement of the charging efficiency by scaling the PRR of each spark gap in the two spark gaps system.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권3호
• /
• pp.18-22
• /
• 2015

This paper deals with high-Tc superconducting (HTS) power charging system with GdBCO magnet, photo-voltaic (PV) controller, and solar panels to charge solar energy. When combining the HTS magnet and the solar energy charging system, additional power source is not required therefore it is possible to obtain high power efficiency. Since there is no resistance in superconducting magnet carrying DC transport current the energy losses caused by joule heating can be reduced. In this paper, the charging characteristics of HTS power charging system was simulated by using PSIM. The charging current of HTS superconducting power charging system is measured and compared with the simulation results. Using the simulation of HTS power charging system, it can be applied to the solar energy applications.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.85-90
• /
• 2001

This work presents experimental results of filter media test by using particles from $0.02\;to\;0.6{\mu}m$ in diameter and by applying different charging states. In order to investigate the electret filter performance, the collection efficiency and the pressure drop of filter were measured. The face velocities of test filters varied from 2.4 to 20.4 cm/s. Another experiment setup for the cartridge cabin air filter was used to get an collection efficiency in submicron region. After charging level of electret filter severely decreased, the change of collection efficiency was verified. Experimental results show that the reliability of electret filters can be poor in some conditions.

• 한국결정성장학회지
• /
• 제31권1호
• /
• pp.55-62
• /
• 2021

CO2 가스 발생 감소와 연비향상을 위해서 HEV 차량은 ISG 시스템을 채용하고 있다. 이 ISG 시스템은 배터리가 감당해야 하는 전기 부하를 증대시켰고, 시동 횟수도 급격히 늘어나게 하였다. 이를 위해 AGM 연축전지가 개발되어 사용되고 있으나, 종래의 연축전지에 비해서 formation 중 전해액량 조절이 더 높은 수준으로 유지해야 됨에 따라 충전시간이 약 3배 가량 길어지게 되었다. 본 연구에서는 formation pattern의 최적화를 통해서 충전효율을 증대시켜 충전시간을 단축하고자 하였다. formation pattern의 최적화를 위해서, 16개 multi step에 10개 충전 step과 6개의 방전 step을 적용하고, step별 충전 전류를 조절한 4가지 조건(21 hr, 24hr, 27 hr, 30 hr)으로 시험을 진행하였다. 그 결과 24 hr 시험 조건이 PbO2 변환율이 가장 높게 분석되었고, 용량 103.3 %, 저온시동성능 38 sec, 충전수입성 37.36 A로 나타났다. Multi-step과 방전 step을 적용한 충전 프로그램의 결과, 충전 중에 국부적으로 급격히 발생된 분극화를 제거하고 전류의 손실을 최소함으로써 충전효율을 증가시킬 수 있음을 검증하였다. 이렇게 충전효율을 증가시킴으로써 본 연구에서는 충전시간을 기존에 비해서 약 30 % 감소시키는 탁월한 결과를 얻을 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권3호
• /
• pp.551-569
• /
• 2024

With the rapid development of electric vehicles (EVs) industry, EV charging service becomes more and more important. Especially, in the case of suddenly drop of air temperature or open holidays that large-scale EVs seeking for charging devices (CDs) in a short time. In such scenario, inefficient EV charging scheduling algorithm might lead to a bad service quality, for example, long queueing times for EVs and unreasonable idling time for charging devices. To deal with this issue, this paper propose a Deep-Q-Network (DQN) based two-stage scheduling method for the large-scale EVs charging service. Fine-grained states with two delicate neural networks are proposed to optimize the sequencing of EVs and charging station (CS) arrangement. Two efficient algorithms are presented to obtain the optimal EVs charging scheduling scheme for large-scale EVs charging demand. Three case studies show the superiority of our proposal, in terms of a high service quality (minimized average queuing time of EVs and maximized charging performance at both EV and CS sides) and achieve greater scheduling efficiency. The code and data are available at THE CODE AND DATA.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권1호
• /
• pp.23-27
• /
• 2018

As the wireless power transfer (WPT) technology based on strongly resonance coupled method realizes large power charging without any wires through the air, there are advantages compared with the wired counterparts, such as convenient, safety and fearless transmission of power. From this reason, the WPT systems have started to be applied to the wireless charging for various power applications such as train, underwater ship, electric vehicle. This study aims for the effect and characteristics of different inserted resonance coil between Tx and Rx coils for charging system of superconducting magnetic levitation (MAGLEV) train. The transfer efficiency and effect are evaluated with helix type, rectangular type copper resonance coil, and HTS resonance coil under bulb and HTS magnet load, respectively. The input power is adapted with radio frequency (RF) power of 370 kHz below 500 W.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.102-107
• /
• 2021

In this paper, the measurements of received power was shown and compared in two developed 5.8GHz 25W wireless charging systems. One is the system using commercial transmission antenna, and the other is the system using transmission antenna combined with metamaterial. The system combined with metamaterial shows higher received power due to negative reflective index of metamaterial. In addition, a comparative analysis of the systems shows that the transmission efficiency in the systems can decrease the real gain of transmission antenna due to higher side robe of beam pattern. The side robe beams of transmitting antenna interferes transmitted beam with the reflected beams from the bottom region due to the side robes. The failure problems of the RF wireless charging systems are discussed and proposed in order to charge mobile devices through the RF wireless charging system.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1523-1528
• /
• 2011

This paper proposes buck-type charging method using motor inductance, 3-phase inverter and bi-directional converter without an additional charger in plug-in hybrid electric vehicles. The proposed system has advantages over the conventional system such as high charging efficiency, high power factor, and low total harmonic distortion. The validity of each methods are verified by theoretical analysis and simulation.

• 한국정보과학회논문지:정보통신
• /
• 제31권1호
• /
• pp.53-61
• /
• 2004

이 논문에서는 무선 LAN망과 이동통신망을 연동하는 통합 시스템에 적합한 과금 시스템 구현 방안을 제시한다. 기존의 무선 LAN망과 이동통신망의 과금 정보를 식별하는 방식이 서로 상이하여, 두 망을 연동하는 통합 시스템에서는 두 망의 과금 정보를 통합하여 식별할 수 있는 방법이 필요하다. 따라서, 이 논문에서는 무선 LAN망과 이동통신망의 서비스를 모두 사용하는 연동 시스템에서 통합된 과금 식별자를 사용하여 두 가지 망의 서비스 사용에 대한 과금 정보를 수집하는 방법을 제시한다. 또한 선불제, 후불제, 정액제와 같은 사용자의 과금 방식을 기반으로 과금 정보 수집 주기를 변경하는 방식을 제시하고, 제시된 방법을 통해서 과금 정보의 정확성을 높이고 과금 정보 수집에 필요한 통신 부하가 감소되는 것을 검증한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.568-572
• /
• 1994

This paper presents equipment for charging and discharging with high power factor aid high efficiency. This equipment is consisted of $3{\phi}$SPWM AC/DC converter for improving input current waveform and input power factor, and bidirectional DC/DC converter for electric isolation in the DC link Part. Therefore, Input power factor and the total efficiency in the proposed system can be increased more than in the conventional phase-controlled thyristor Charging - Discharging System.