• Management & Information Systems Review
• /
• v.30 no.3
• /
• pp.1-25
• /
• 2011

The purpose of this study was to examine the impact of the service characteristics of premium information contents, one of premium Internet contents, on customer satisfaction and customer loyalty, as the premium Internet contents market has attained a rapid growth owing to the nationwide penetration of the Internet and its ease of use. Earlier studies were analyzed to define the service characteristics of premium Internet information contents, and a research model and hypotheses were formulated to find out the influence of the characteristics on customer satisfaction and customer loyalty. After a survey was conducted, the analyzable answer sheets from 359 respondents were analyzed. As a result, four service factors of premium Internet information contents that were reliability, charge, usefulness and convenience were identified as the variables that had a significant impact on customer satisfaction, and the other two factors that were timeliness and diversity exerted no influence on that. And customer satisfaction affected customer loyalty in a significant manner. This study attempted to investigate the influential relationship of the diverse service characteristics of premium Internet information contents on customer satisfaction and customer loyalty to have a good understanding of the attitude and will of consumers who bought the premium information contents, and this study also intended to make a contribution to the improvement of the quality of information contents in an effort to step up the revitalization of the Internet contents market by helping the market attract more loyal customers.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.407-413
• /
• 2017

The fundamental property of magnesia phosphate cement (MPC) for concrete repair material was investigated in this research. For mechanical properties, setting time, compressive strength and tensile/flexural bond strength were measured, and hydration products were detected by X-ray diffraction. The specimens were manufactured with dead burnt magnesia and potassium dihydrogen phosphate was admixed to activate the hydration of magnesia and a borax was used as a retarder. To observe the pore structure and ionic permeability of MPC mortar, mercury intrusion porosimetry was performed together with rapid chloride penetration test (RCPT). As a result, time to set of Fresh MPC mortar was in range of 16 to 21 min depend on the M/P ratio. Borax helped delaying setting time of MPC to 68 min. The compressive strength of MPC with M/P of 4 was sharply developed to 30 MPa within 12 hours. The compressive strength of MPC mortar was in range of 11.0 to 30.0 MPa depend on the M/P ratio at 12 hours of curing. Both tensile and flexural bond strength of MPC to old substrate (i.e. MPC; New substrate to OPC; Old substrate) were even higher than ordinary Portland cement mortar (i.e. [OPC; New substrate] to [OPC; Old substrate]) does, accounting 19 and 17 MPa, respectively. The total pore volume of MPC mortar was lower than that of OPC mortar. MPC mortar had the entrained air void rather than capillary pore. The RCPT showed that total charge passed of OPC mortar had more than that of MPC mortar, which can be explained by the pore volume and pore distribution.

• Particle and aerosol research
• /
• v.12 no.3
• /
• pp.95-102
• /
• 2016

Controlling exposures to occupational hazards is important for protecting workers. Certified facepiece respirators are recommended when engineering controls do not adequately prevent exposures to airborne nanomaterials. The objective of this study is to carry out the experimental performance test to investigate the fractional efficiencies of the filter media for two grades of facepiece respirators. Experimental performance evaluations were carried out for the test NaCl particles and silver nanoparticles. For media of respirator filter, the penetration of NaCl particles was less than 5% and the most penetrating particle size occurred at about 40 nm. For silver nanoparticles, the most penetrating particle size was about 20nm with higher efficiency than those of NaCl particles. Charge characteristics of airborne nanoparticles is important because the media of respirator filter is made by the electret filter media.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.31-38
• /
• 2008

The objective of this work is to study transdermal delivery of levodopa using iontophoresis and evaluate various factors which affect the transdermal transport. Levodopa is unstable in aqueous solution, and, in order to establish a stable condition for levodopa for the duration of experiment, we investigated the stability of levodopa in aqueous solutions of different pHs with/without the addition of dextrose or the application of current. Using stable aqueous solution, we have studied the effect of pH, polarity and penetration enhancer (ethanol) on transdermal flux and compared the results. We also investigated the iontophoretic flux from hydroxypropyl cellulose (HPC) hydrogel. In vitro flux study was performed at $33^{\circ}C$, using side-by-side diffusion cell. Full thickness hairless mouse skin and rat skin were used for this work. Current densities applied were 0.4 or $0.6mA/cm^2$ and current was off after 6 hour application. Stability study showed that levodopa solution with a pH 2.5 or 4.5 maintained the initial concentration of levodopa for 24 hours with the addition of 5% dextrose. However, at pH 9.5, levodopa was unstable and 30 to 40% of levodopa degraded within 24 hours, even with the addition of 5% dextrose. Hydrogel swollen with dextrose added levodopa solution maintained about 97% of the initial concentration of levodopa for 13 days, when stored in $4^{\circ}C$. The application of current did not affect the stability of levodopa in hydrogel. Flux study from levodopa solution with pH 2.5 showed that cathodal delivery of levodopa was higher than passive or anodal delivery. When the pH of the donor solution was 4.5, anodal delivery of levodopa was higher than passive or cathodal delivery. These results seem to indicate that electroosmosis plays more dominant role than electrorepulsion in the flux of levodopa at pH 2.5, and the reverse situation applies for pH 4.5. The passive flux was unexpectedly high for the ionized levodopa. Similar to the results from aqueous solution, cumulative amount of levodopa transported trom HPC hydrogel by cathodal delivery was significantly higher than passive or anodal delivery. The treatment of 70% ethanol cotton ball by scrubbing increased passive, anodal and cathodal flux, with the largest increase for anodal flux. These results indicate that iontophoretic delivery of zwitterion such as levodopa is much complicated than that can be expected from small ionic molecules with single charge. The results also indicate that the balance between electroosmosis and electrorepulsion plays a very important role in the transport through skin.

• Archives of Pharmacal Research
• /
• v.19 no.2
• /
• pp.116-121
• /
• 1996

Antisense oligonucleotides seem to provide a promising new tool for the therapy. Choi et al. (1995) reported antisense phosphorothioate oligonucleotides (PS-ODN, 25 mer) complementary to TGF-.betha. mRNA designed for scar formation inhibitor to eliminate scars, which was caused by undesired collagen deposition due to overexpression of TGF-.betha., in wounded skin. PS-ODN were evaluated in vitro for skin penetration using normal and tape-stripped damaged rat skin. The in vitro skin transports were carried out with partially modified PS-ODN (6S) and fully modified PS-ODN (25S). The cumulative amount of PS-ODN (6S) penetrated through normal rat skin was $0.234{\pm}0.041{\mu}g/cm^2$ and that of tape-stripped damaged rat skin was $1.077{\pm}0.301{\mu}g/cm^2$ over 8 hrs. PS-ODN (25S) can not be found in receptor medium through normal skin due to high molecular weight (Mol.Wt.=8,000) and polyanionic charge. However, the cumulative amount of PS-ODN (25S) penetrated across damaged rat skin in PBS was $0.340{\pm}0.296{\mu}g/cm^2$ over 8 hrs. The absense of dermis raised the cumulative amount of PS-ODN (6S) penetrated through rat skin. And the fluxes of PS-ODN (6S) and PSODN (25S) at 8hrs across damaged rat skin were $134.63{\pm}37.67{\mu}g/cm^2$ h, and $42.50{\pm}36.95ng/cm^2$ h, respectively. While PS-ODN (25S) was stable in 10% heat inactivated fetal bovine serum (FBS) during 24 hrs, PS-ODN (6S) was less stable than PS-ODN (25S), but was markedly stable than unmodified phosphodiester. It is suggested that the cumulative amount of PS-ODN (6S) penetrated through damaged rat skin is larger than that of PS-ODN (25S) since the former is easier to degrade by nuclease than the latter and then is apt to penetrate into skin. Thus, PS-ODN represents a logical candidate for further evaluation due to the potential for delivery into the wounded skin.

• Journal of Korean Society of Transportation
• /
• v.35 no.3
• /
• pp.210-219
• /
• 2017

Electric vehicles, which are attracting attention as eco-friendly vehicles, have been increasing in number since 2011 in Korea. The purpose of this study is to analyze the efficient operation of existing charging stations and factors to consider when installing additional charging stations based on the case of Jeju Island where the electric vehicle penetration rate is high and the charging infrastructure is relatively well established. The characteristics of using electric car charging stations by region, type of facility, and time of day are analyzed. As a result of analyzing the frequency of using the charger installed in Jeju Island, the utilization of both the fast charger and the slow charger is found to be concentrated in a specific area. The usage rate of charger installed in a business facility and a public parking lot is high in both fast charger and slow charger. However, according to the usage rate by time of day, the fast charger has a high utilization rate throughout the afternoon, while the use of a slow charger is concentrated in the morning. In order to enable users to utilize the electric vehicle charging station efficiently, it is necessary to provide a publicity guide for the charging station having a low utilization rate, a notice for using the charger, and a notification of completion of charging. Considering the charging demand, the area where the charger is not yet installed should be considered as the area to install the charger, and in addition, the additional installation should be considered in the area and the facility where the amount of charge is large. Service improvement is expected to be possible by utilizing actual electric vehicle charging behavior analysis result.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.405-413
• /
• 2022

Since the COVID-19 outbreak, the active utilization of new health care service utilizing the ICT technology and data science such as telemedicine, smart hospital, AI dignosis has been increasingly found. In this study we examined the business model of Amazon healthcare which leads disruptive innovation in U.S. health care industry with the introduction of hybrid model of telemedicin, in-person care and customer-centric online drug delivery, home-use diagnostic kit, characterized by the integrated model combining medical care, drug delivery and the use of diagnostic kit. We showed using the multiproduct competition model that the synergy effect between the Amazon's original business areas and the healthcare business area causes the active market penetration and the increase in the customer value from utilization of the Amazon care. Using Hotelling's spatial competition model, we also showed that the competition in the health care market can be greater when consumer's choice of health care providers are available in telemedicine platform. In the long, run the issue of competition being weakened due to the exit of less competent healthcare providers may arise, to which the policymakers in the charge of fair competition in health care industry should pay attention.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.450-456
• /
• 2022

In this study, as the preliminary research on the development of heating concrete members, compressive strength and accelerated chloride diffusion behavior in the mortar specimens containing C₁₂A₇ based binder and anhydrite was evaluated. Also, the effect of the mixing ratio of the citric acid based retarder was quantitatively evaluated by considering 4 levels of mixing cases. The compressive strength tests of the mortar specimen were performed referred to KS L ISO 679, and the accelerated chloride diffusion tests were performed according to NT BUILD 492 and ASTM C 1202. In the mortar with 0.3 % of retarder, the highest compressive strength was evaluated, which showed the strength development ratio of 127.6 % compared to the control case. It was considered that engineering performance was improved by effectively securing setting and curing time with 0.3 % of citric acid based retarder. As the result of the evaluation of the passed charge and the accelerated chloride diffusion coefficient, the evaluation results had similar behavior with the results of compressive strength. According to the previous study, the strength behavior and the chloride diffusion behavior had a linear relationship. The mixture showing the highest strength performance had the highest durability performance for chloride ingress, and the heating concrete development from this study will be performed in the future.