• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.26-32
• /
• 2000

The impact of major surface chemical properties of silica sols on the retention and drainage performance of the silica based micrparticle system, Compozil was investigated using four different silica sols. And the effect of silica properties on the interactions with cationic starch and cationic plyacrylamide has also been identified. The surface charge density and the stability over pH of silica sols were increased by introducing aluminosilicate anions at surface. It was found that the charge density of silica sols determined the addition level necessary to attain the maximum retention and drainage. When silica sols were combined with cationic starch, the change density of the product was the critical properties and the degree of microagregation was of minor importance. In the cationic polyacrylamide system the degree of colloid structure appeared to be a more critcial property than the charge density of silica sols.

• Journal of Magnetics
• /
• v.10 no.4
• /
• pp.149-151
• /
• 2005

The electric properties of a single crystal bismuth telluride doped with a small concentration of Erbium, $Bi_{z-x}Er_xTe_3$ with x = 0.002, are investigated as a function of temperature. The resistivity was obtained by using the van der Pauw method. The measured electrical resistivity is 78 ${\mu}{\Omega}cm$ at 4.2 K. The charge density of $Bi_{z-x}Er_xTe_3$ is found to be $2{\times}10^{19}/cm^3$ at 4.2 K. It turns out that $Bi_{z-x}Er_xTe_3$ is a p-type semiconductor. It is discussed that the high mobility and less density support that $Bi_{z-x}Er_xTe_3$ is a potential sensor with high energy resolution. Comparison with an established material (i.e. Au:Er alloy) is also discussed.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.302-309
• /
• 2017

The ageing of XLPE cable insulation will lead to the accelerating accumulation of space charge, which will greatly affect the safe operation of the HVDC cable. In order to investigate the influence of different ageing modes on the space charge distribution of the HVDC cable, thermal stressed, electrical stressed and electro-thermal stressed endurance tests were carried out on the XLPE peelings. The tested XLPE peelings were obtained from 160kV HVDC cable insulation. The endurance tests were carried at thermal stress of 363K, electrical stress of 20kV/mm DC and a combination of both. The Pulsed Electro-Acoustic (PEA) method was used to measure the space charge distribution of the samples. The influences of ageing on the trap energy distribution were analyzed based on the isothermal relaxation theory and the decay characteristics of the space charge. The results showed that thermal ageing would help to improve the crystalline morphologies of the XLPE at the early stage. The total amount of space charge decreased compared to the ones before thermal ageing. The long term of electrical stress would result in the cleavage of polymer molecule chains which would intensify the accumulation of space charge and increase the density and depth of electron traps. With a combination of electrical and thermal stress, the injection and migration of space charge were more significant. Besides, the depth and density of electron traps increased rapidly with the increase of endurance time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.49-58
• /
• 2006

The purpose of this study is to develop transportation-sensitive land use densities in a metropolitan context. It analyses traffic impacts according to 20 different development density scenarios in the downtown Seoul, and estimates the density ceiling. The results identify that the transportation-wise sustainable density in the downtown can be extended up to the FAR level of 460% with an option of 2,000 won congestion charge levied on the downtown area. It also finds that the region-wide sustainability measured by congestion level can be improving as the level of congestion charge increases. Without the congestion charge, however, the density ceiling slides down to 430%. It is recommended that, in order to bring in higher density developments in the region, transportation demand management (TDM) measures are indispensible.

• Food Science and Biotechnology
• /
• v.15 no.2
• /
• pp.163-167
• /
• 2006

Pectin was enzymatically extracted from industrial lemon pomace by using an endo-polygalacturonase from Aspergillus niger as a processing aid and compared to pectin extraction by hot hydrochloric acid. The yield of pectin was 17.6 and 20.2% with enzymatic and acidic treatments, respectively. The molecular weight distribution did not vary greatly between the samples extracted with enzyme or acid. Large differences in charge density were observed, however, when the samples were analyzed by anionic-exchange chromatography. Pectin extracted by the enzymatic treatment indicated higher charge density than that obtained by hydrochloric acid. The higher charge density could due to the presence of endogenous lemon pectinesterase, which was activated at low pH 4.5 in situ conditions during the process of enzymatic extraction, leading to low methoxylated pectin with a higher charge density.

• Journal of Environmental Science International
• /
• v.11 no.2
• /
• pp.93-102
• /
• 2002

Using a simple continuous optical technique, coupled with measurements of zeta potential, the flocculation characteristics of kaoline suspensions of different content(15, 35 and 55 NTU) by several cationic polyelectrolytes, has been examined. The optimum mixing is obtained under a constant stirring of 200 rpm, differently from a general flocculation test. The charge density of a polyelectrolyte is important in determining the optimum dosage and in the removal of kaoline particles. The optimum dosage is less for the polyelectrolyte of higher charge density and is the same regardless of kaoline content. At the dosage, the removal of kaoline particles is higher for the polyelectrolyte of higher charge density and zeta potential of kaoline particles reaches to near zero. The rate of adsorption and flocculation rate have been found to be affected by charge density and molecular weight of a polyelelctrolyte and the content of kaoline particles.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1102-1106
• /
• 2015

A hybrid supercapacitor (HS) is an energy storage device used to enhance the low weight energy density (Wh/kg) of a supercapacitor. On the other hand, a sudden decrease in capacity has been pointed out as a reliability problem after many charge/discharge cycles. The reliability problem of a HS affects the early aging process. In this study, the capacity performance of a HS was observed after charge/discharge. For detailed analysis of the initial charge/discharge cycles, the charge and discharge curve was measured at a low current density. In addition, a solid electrolyte interphase (SEI) layer was confirmed after the charge/discharge. A HC composed of a lithium titanate (LTO) anode and active carbon cathode was used. The charge/discharge efficiency of the first cycle was lower than the late cycles and the charge/discharge rate was also lower. This behavior was induced by SEI layer formation, which consumed Li ions in the LTO lattice. The formation of a SEI layer after the charge/discharge cycles was confirmed using a range of analysis techniques.

• Journal of Biomedical Engineering Research
• /
• v.18 no.3
• /
• pp.307-313
• /
• 1997

he photoconductive gain mechanism in amorphus silicon devices was investigated in connection with applications to radiation detection. Various device types such as p-i-n, n-i-n and i-i-p-i-n structures were fabricated and tested. Photoconductive gain was measured in two time scales : one for short pulses of visible light(<$1{\mu}sec$) which simulate the transit of energetic charged particles or ${\gamma}$-rays, and the other for rather long pulses of light(1msec) which simulate x-ray exposure in medical imaging, We used two definitions of phtoconductive gain : current gain and charge gain which is an integration of the current gain. We obtained typical charge gains of 3~9 for short pulses and a few hundreds for long pulses at a dark current density level of 10mA/$cm^2$. Various gain results are discussed in terms of the device structure, applied bias and dark current density.

• Journal of the Korean Ceramic Society
• /
• v.32 no.11
• /
• pp.1276-1282
• /
• 1995

• ETRI Journal
• /
• v.27 no.3
• /
• pp.319-325
• /
• 2005

In this paper the effect of temperature on the electrical properties of organic semiconductor disperse orange dye 25 (OD) have been examined. Thin films of OD have been deposited on $In_{2}O_{3}$ substrates using a centrifugal machine. DC current-voltage (I-V) characteristics of the fabricated devices $(Al/OD/In_{2}O_{3)$ have been evaluated at varying temperatures ranging from 40 to $60^{\circ}C$. A rectification behavior in these devices has been observed such that the rectifying ratio increases as a function of temperature. I-V characteristics observed in $Al/OD/In_{2}O_{3)$ devices have been classified as low temperature $({\leq} 50^{\circ}C)$ and high temperature characteristics (approximately $60^{\circ}C$). Low temperature characteristics have been explained on the basis of the charge transport mechanism associated with free carriers available in OD, whereas high temperature characteristics have been explained on the basis of the trapped space-charge-limited current. Different electrical parameters such as traps factor, free carrier density, trapped carrier density, trap density of states, and effective mobility have been determined from the observed temperature dependent I-V characteristics. It has been shown that the traps factor, effective mobility, and free carrier density increase with increasing values of temperature, whilst no significant change has been observed in the trap density of states.