• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.33-36
• /
• 2008

The transient behavior of a passive air breathing direct methanol fuel cell (DMFC) operated on vapor-feeding mode is studied in this paper. It generally takes 30 minutes after starting for the cell response to come to its steady-state and the response is sometimes unstable. A mathematical dynamic one-dimensional model for simulating transient response of the DMFC is presented. In this model a DMFC is decomposed into its subsystems using lumped model and divided into five layers, namely the anodic diffusion layer, the anodic catalyst layer, the proton exchange membrane (PEM), the cathodic catalyst layer and the cathodic diffusion layer. All layers are considered to have finite thickness, and within every one of them a set of differential-algebraic governing equations are given to represent multi-components mass balance, such as methanol, water, oxygen and carbon dioxide, charge balance, the electrochemical reaction and mass transport phenomena. A one-dimensional, isothermal and mass transport model is developed that captures the coupling between water generation and transport, oxygen consumption and natural convection. The single cell is supplied by pure methanol vapor from a methanol reservoir at the anode, and the oxygen is supplied via natural air-breathing at the cathode. The water is not supplied from external source because the cell uses the water created at the cathode using water back diffusion through nafion membrane. As a result of simulation strong effects of water transport were found out. The model analysis provides several conclusions. The performance drop after peak point is caused by insufficiency of water at the anode. The excess water at the cathode makes performance recovery impossible. The undesired crossover of the reactant methanol through the PEM causes overpotential at the cathode and limits the feeding methanol concentration.

• Journal of Agricultural Extension & Community Development
• /
• v.15 no.3
• /
• pp.499-531
• /
• 2008

Rural Traditional Theme Villages are one of the village-based businesses, which obtains excellent results. However, it also has brought negative results such as splits in locals due to income disparity, and ill-advised development which does not consider surrounding potential resources, etc. So, this study analyzes several problems of Rural Traditional Theme Villages, and proposes how Rural Traditional Theme Villages can be revitalized by benchmarking other successful cases. First, it is important to pursue differentiation of operating programs for Rural Traditional Theme Villages. Second, it is possible to give weight to elements which show efficiently rural atmosphere to enhance images of Rural Traditional Theme Villages. Third, expanding budget support and securing a new route for budget are definitely needed to cultivate self-growth capability of villages. Fourth, it is necessary to apply experts and facilities of local-based universities, cooperate with relevant organizations, and nurture local leaders by various means such as study in/visits to advanced regions at home and abroad and experts training. Localgovernment should be in charge of nurturing talented people. Fifth, it is necessary to reinvigorate rural economy by networking each Rural Traditional Theme Village, providing a wide range of information on diversified villages to people in cities, and promoting consumption. Moreover, securing immovable customers is important through networking city-rural exchange with city consumers and other organizations, and sisterhood relationship, membership businesses and events. As mentioned above, it is expected that Rural Traditional Theme Villages will be able to be developed continuously as a model for rural revitalization, which is stagnant, by expanding city-rural interchange.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.5
• /
• pp.1279-1292
• /
• 2018

An apartment house and an officetel are already our most important residential space generally. Among food, clothing and shelter, an apartment and an officetel are in charge of a shelter as the most fundamental in our life. To live in an apartment and an officetel, it is necessory for residents to write a lot of informations about themselves. Therefore massive privacy files about apartment's residents is inevitable and it is managing in its own way. A privacy accident in an apartment houses would be a big society problem. This study examined 'tenant list' to find out what it collects and what it's problems are and proposed some vairous measures about the privacy improvements like items reduction & consent process improvement in an apartment house and an officetel from privacy laws perspective.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.57-68
• /
• 2016

In this study, we present the modern hybrid system based power generation for electric vehicle applications. We describe the hybrid structure of modified current source based DC - DC converters used to extract the maximum power from Photovoltaic (PV) and Fuel Cell system. Due to reduced dc-link capacitor requirement and higher reliability, the current source inverters (CSI) better compared to the voltage source based inverter. The novel control strategy includes Distributed Maximum Power Point Tracking (DMPPT) for photovoltaic (PV) and fuel cell power generation system. The proposed DC - DC converters have been analyzed in both buck and boost mode of operation under duty cycle 0.5>d, 0.5<d<1 and 0.5<d for capable electric vehicle applications. The proposed topology benefits include one common DC-AC inverter that interposes the generated power to supply the charge for the sharing of load in a system of hybrid supply with photovoltaic panels and fuel cell PEM. An improved control of Direct Torque and Flux Control (DTFC) based induction motor fed by current source converters for electric vehicle.In order to achieve better performance in terms of speed, power and miles per gallon for the expert, to accepting high regenerative braking current as well as persistent high dynamics driving performance is required. A simulation model for the hybrid power generation system based electric vehicle has been developed by using MATLAB/Simulink. The Direct Torque and Flux Control (DTFC) is planned using Xilinx ISE software tool in addition to a Modelsim 6.3 software tool that is used for simulation purposes. The FPGA based pulse generation is used to control the induction motor for electric vehicle applications. FPGA has been implemented, in order to verify the minimal error between the simulation results of MATLAB/Simulink and experimental results.

• Korean Journal of Agricultural Science
• /
• v.46 no.4
• /
• pp.907-914
• /
• 2019

Ammonia (NH₃) that reacts with nitric or sulfuric acid in the air is the major culprit contributing to the formation of fine particulate matter (PM_2.5). NH₃ volatilization mainly originates from nitrogen fertilizer and livestock manure applied to arable soil. Cation exchange capacity (CEC) of peat moss (PM) and zeolite (ZL) is high enough to adsorb ammonium (NH₄⁺) in soil. Therefore, they might inhibit volatilization of NH₃. The objective of this study was to compare the effect of PM and ZL on NH₃ volatilization from upland soil. For this, a laboratory experiment was carried out, and NH₃ volatilization from the soil was monitored for 12 days. PM and ZL were added at the rate of 0, 1, 2, and 4% (wt wt^-1) with 354 N g m^-2 of urea. Cumulative NH₃-N volatilization decreased with increasing addition rate of both materials. Mean value of cumulative NH₃-N volatilization across application rate with PM was lower than that with ZL. CEC increased with increasing addition rate of both materials. While the soil pH increased with ZL, it decreased with PM. Increase in CEC resulted in NH₄⁺ adsorption on the negative charge of the external surface of both materials. In addition, decrease in soil pH hinders the conversion of NH₄⁺ to NH₃. Based on the above results, the addition of PM or ZL could be an optimum management to reduce NH₃ volatilization from the soil. However, PM was more effective in decreasing NH₃ volatilization than ZL due to the combined effect of CEC and pH.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.2
• /
• pp.178-186
• /
• 2015

Protease inhibitors (PI) of trypsin and papain as target proteases from the roe of bastard halibut Paralichthys olivaceus were fractionated out using ammonium sulfate precipitation (A), DEAE 650M anion exchange chromatography (D), and Sephacryl S-300 gel filtration (S). The recovery percentages of the fractions with the strongest inhibitory activity for each fractionation method were 13% for the A4 fraction, 21.2% for the D3 fraction, and 21.3% for the S2 fraction, with specific inhibitory activities of the fractions toward trypsin and casein of 168, 139, and 218 U/mg, respectively, while no inhibition of papain was observed. The $IC_{50}$ for the trypsin-specific substrate $N{\alpha}$-benzoyl-$\small{L}$-arginine-p-nitroanilide (BAPNA) was 0.65, 1.55, 2.26, and 2.85 mg/mL for the A4, S2, A3, and D3 fractions, respectively. These results suggest that chromatographic fractionation methods (D and S) based on the molecular mass and charge of the protein were more effective at fractionating PI than was ammonium sulfate precipitation based on protein solubility, and that the bastard halibut roe extract acts as a serine protease inhibitor. Therefore, the PI fraction from fish roe might be useful for inhibiting proteases in foodstuffs, and could constitute an alternative food-grade inhibitor for the surimi industry.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2331-2340
• /
• 2015

In this paper, we propose a social-based collaboration systems for business process management in the mobile cloud. This XMDR-DAI is to provide services for data sharing and exchange between local systems that operate independently in a cloud environment, take charge of a social-based collaborative business process management. Social-based collaborative business processes are handled in a collision among a structure such as unit conversion, meaning conflict, and the schema mapping data resulting from the inner query. The conflict was resolved by mapping process which takes in each XMDR-DAI.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.671-676
• /
• 2013

Recently, there are many efforts focused on development of Redox Flow Battery (RFB) for large energy storage system. Economical hydrocarbon membranes alternative to fluorinated membranes for RFB membrane are receiving attention. In this study, characteristics of poly(arylene ether sulfone) (PAES) were compared with expensive fluorinated membrane at VRB (Vanadium Redox Flow Battery) operation condition. Permeability of vanadium ion through membrane, ion exchange capacity (IEC), change of OCV, swelling, charge-discharge curves and energy efficiency were measured. PAES membrane showed lower permeability of vanadium ion, higher IEC and then higher energy efficiency compared with Nafion 117 membranes.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.569-573
• /
• 1998

A water soluble polymer, polycondensate of 1-butylamine and epichlorohydrin (PBE), was synthesized by condensation of 1-butylamine and epichlorohydrin. The characteristics of PBE were determined by IR spectroscopy, low angle light scattering measurement, and $\zeta$ potential measurement. Its interactions with colloidal bentonite particles in aqueous medium were also studied. The results of the studies are as follows : PBE is a cationic polyelectrolyte carrying tertiary ammonium ions on its backbone. The average molecular weight of PBE is found to be about 1,600. The adsorption of PBE on the colloidal bentonite particles are well described with Langmuir adsorption isotherm. As the amounts of PBE adsorbed on the bentonite particles increase, the $\zeta$ potential of the particles changes its sign from negative to positive. This inversion of charge confirms that PBE is cationic in nature. The adsorption of PBE onto the bentonite particles was found to occur through cation exchange reaction. It has been shown that PBE has flocculation effects on the colloidal suspension of bentonite. It has also enhanced effects of filtrability on the digested sludge.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.441-447
• /
• 2014

$AgI/AgCl/H_2WO_4$ double heterojunctions photocatalyst was prepared via deposition-precipitation followed by ion exchange method. The structure, crystallinity, morphology, chemical content and other physical-chemical properties of the samples are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray spectra (EDX), UV-vis diffuse reflectance spectroscopy (DRS), and photoluminescence (PL). The photocatalytic activity of the $AgI/AgCl/H_2WO_4$ was evaluated by degrading methyl orange (MO) under visible light irradiation (${\lambda}$ > 400 nm). The double heterojunctions photocatalyst displayed more efficient photocatalytic activity than pure AgI, AgCl, $H_2WO_4$ and AgCl/$H_2WO_4$. Based on the reactive species and energy band structure, the enhanced photocatalytic activity mechanism of $AgI/AgCl/H_2WO_4$ was discussed in detail. The improved photocatalytic performance of $AgI/AgCl/H_2WO_4$ double heterojunctions could be ascribed to the enhanced interfacial charge transfer and the inhibited recombination of electron-hole pairs, which was in close relation with the $AgI/AgCl/H_2WO_4$ heterojunctions formed between AgI, AgCl and $H_2WO_4$.