• 한국의류학회지
• /
• 제28권2호
• /
• pp.303-311
• /
• 2004

The purposes of this study were to investigate characteristic changes on nonwoven fabric by the charcoal printing. It separate grind charcoal as two different size of particles 45-52${\mu}{\textrm}{m}$ and 53-65${\mu}{\textrm}{m}$ for hand screen printing on three kind of nonwoven fabrics. To examine the effect of charcoal printing on nonwoven fabric were to obselve surface changes by a scanning electron microscope, dyeability by using spectrophotometer, moisture regain by oven method, air permeability, anion property, deodoriration and antibacterial activity. The results were as follows： When charcoal powder concentration increased from 3 to 9％, K/S value also increased from 3.06 to 8.55. When charcoal concentration increased, moisture regain also increased. In same concentration, moisture regain occurred higher as particle of small size. Air permeability decreased when the charcoal printing concentration increased. Anion occurrence appeared 140-160ion/cc from three different kinds of nonwoven fabrics in 3％ and 9％ charcoal concentration. Therefore, occurred anion ineffectively. In concentration of 3％, rate of deodorization measured as 89％, 83％ and 87％, and 9％ concentration caused 96％, 86％ and 93％ of high deodorization. Antibacterial activity examination in nonfinished nonwoven fabric resulted range of 60％, however, 3％ and 9％ concentration finished nonwoven fabric resulted 99.9％ of excellent antibacterial activity.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.80-84
• /
• 2007

Charcoal was used as a carbon source for improving the critical current density of $MgB_2$ and the effect of annealing temperature on the $J_c$ of $MgB_2$ was investigated. The charcoal powder used in this study was $1{\sim}2$ microns in size and was prepared by wet attrition milling. $MgB_2$ bulk samples with a nominal composition of $Mg(B_{0.95}C_{0.05})_2$ were prepared by in situ process of Mg and B powders. The powder mixture was uniaxially compacted into pellets and heat treated at temperatures of $650^{\circ}C\;-\;1000^{\circ}C$ for 30 minutes in flowing Ar gas. It was found that superconducting transition temperature of $Mg(B_{0.95}C_{0.05})_2$ decreased by charcoal additions which indicates the carbon substitution for boron site. $J_c$ of $Mg(B_{0.95}C_{0.05})_2$ was lower than that of the undoped $MgB_2$ at the magnetic fields smaller than 4 Tesla, while it was higher than that of the undoped sample especially at the magnetic field higher than 4 T. High temperature annealing seems to be effective in increasing $J_c$ due to the enhanced carbon diffusion into boron sites.

• 한국환경농학회지
• /
• 제24권2호
• /
• pp.185-190
• /
• 2005

일부 농가에서 이용하고 있는 기능성 쌀 생산 농자재인 게 껍질, 견운모 및 숯 분말의 시용이 벼의 생육, 수량 및 쌀의 품질에 미치는 영향을 구명하고자 본 실험을 실시하였다. 게 껍질 분말 시용구는 다른 처리에 비하여 분얼수, 이삭수, 엽면적지수, 식물체의 질소함량을 증가시켰으나 등숙율은 낮았고, 백미수량은 차이가 없었다. 미질은 게 껍질 분말 시용구에서 완전미 비율과 Toyo 식미치는 낮았고, 분상질미 비율, 단백질 함량은 높았다. 견운모와 숯 분말 처리는 벼의 생육, 수량 및 수량구성요소, 쌀의 품질은 무처리와 차이가 없었고, 단백질 함량는 무처리보다 높았으나 Toyo 식미치는 낮았다.

• 대한임상독성학회지
• /
• 제15권1호
• /
• pp.17-23
• /
• 2017

Purpose: Activated charcoal (AC) has been widely used as a universal antidote. Currently, emergency medical centers in Korea cannot administer AC due to discontinuation of the supply of commercial ready-mixed AC suspension. This study was conducted to investigate the proportion of emergency medical centers that administer AC to poisoning patients and provide basic information for emergency physicians and toxicologists. Methods: A prospective telephone survey of all of the included emergency medical institutions was conducted. The type of emergency medical institution, average annual number of patients admitted to the emergency department, annual average number of patients who were poisoned and whether the hospital currently utilizes gastric lavage and administration of AC were determined. Results: AC was administered to poisoning patients in 40% of regional emergency medical centers, 59.3% of local emergency medical centers, and 45.9% of local emergency medical rooms. Overall, 37% of total emergency medical institutions did not administer AC due to discontinuation of the commercial ready-mixed AC suspension. Additionally, 77% of emergency physicians in institutions without AC knew AC is necessary for poisoning patients. The rate of vomiting experienced by the medical staff according to types of charcoal showed that the average rate of vomiting was 33% for commercial ready-mixed activated charcoal suspension and 51% for self-prepared charcoal powder (p=0.02). Conclusion: AC should be secured promptly in emergency medical institutions. Before the supply of commercial ready-mixed AC suspension becomes again it is essential to develop a standardized regimen for self-preparation of charcoal powder and to educate emergency physicians and toxicologists to its use.

• 한국세라믹학회지
• /
• 제55권2호
• /
• pp.153-159
• /
• 2018

Porous ceramic plates were prepared from Onggi clay and bamboo charcoal powder at 1100 and $1200^{\circ}C$ and their porous properties and water absorption, and the cooling effect of porous plates, were investigated to produce eco-friendly porous ceramics for a self-cooling system that relies on the evaporation of absorbed water. Porous properties were dependent on the particle size of charcoal powder pore forming additive and the firing temperature; properties were also found to be dependent on the total pore volume, average pore size and porosity, which had values of $0.103-0.243cm^3/g$, 0.81 - 2.56 mm and 20.9 - 38.2%, respectively, at $1100^{\circ}C$ and $0.04-0.18cm^3/g$, 0.33 - 2.03 mm and 10.8 - 30.9%, respectively, at $1200^{\circ}C$. Cooling temperature difference of flowing air parallel to surface of porous ceramic plates fired with two kinds of charcoal powder at $1100^{\circ}C$ was $3.5-3.6^{\circ}C$ at $26^{\circ}C$ and 60% of relative humidity in a closed box. Cooling temperature difference was dependent on the number of porous plates and the distance between porous plates. A simple and eco-friendly cooling system using porous ceramic plates fired from Onggi clay and charcoal powder was proposed.

• 한국주조공학회지
• /
• 제7권2호
• /
• pp.79-83
• /
• 1987

• 임산에너지
• /
• 제20권1호
• /
• pp.1-5
• /
• 2001

국내 주요 간벌목과 목질재료 탄화물 중 성능면과 자원면을 고려하여 선정한 수 토양개량시험을 실시하여, 이들 목질폐잔재 탄화물들이 토양개량제로서의 효과와 토양개량과 관련하여 입자크기에 따른 효과에 관하여 조사한 결과는 다음과 같다. 서양측백 파종실험에서 토양에 목탄을 처리한 것이 무처리구보다 좋은 성장을 나타냈으며 그 중 흡착성이 좋은 잣나무탄이 가장 좋은 처리효과를 나타냈다. 칠엽수 이식실험에서도 무처리보다 목탄을 처리한 것이 좋은 길이성장을 보였다. 또한 파종 및 이식실험에서 입자의 크기에 따른 성장량의 차이는 없는 것으로 나타났다. 사과나무 문우병에 의한 뿌리썩음 때문에 쇠약해진 사과나무에 목탄을 시용하여 수세회복의 효과를 얻었다.

• 한국화재소방학회논문지
• /
• 제24권6호
• /
• pp.7-12
• /
• 2010

본 논문은 누전에 관한 것으로 누설전류에 의한 열적 상관관계를 도출하는데 그 목적을 두고 있다. 누전 모델은 개방 및 밀폐상태(분전반 내부)로 구분하고, 누전개소에 목 분진과 빗물, 목탄을 첨가하여 누전전류에 대한 열적 상관관계를 특성을 분석하였다. 개방상태의 90mA에서 목 분진과 빗물은 $88.8^{\circ}C$, 목탄의 경우는 $105^{\circ}C$로 목탄시료가 목분진과 빗물보다 높은 열적 특성이 나타났다. 또한 목탄에 누설전류 110mA를 흘렸을 때 $238.6^{\circ}C$로 주위의 전기설비(전기배선, 분전반)의 재질의 변형을 초래할 수 있다. 밀페된 상태에서는 같은 90mA에서 목 분진과 빗물에서는 $90.8^{\circ}C$, 목탄의 경우 $250.6^{\circ}C$로 목분진과 빗물의 경우는 비슷한 양상을 보이나, 목탄의 경우는 2배 이상의 높은 열적 특성을 보였다. 개방 및 밀폐상태에서 시료에 따른 열적특성 데이터는 전기화재 조사나 누전전류에 대한 열적 기초 자료로 활용 가능하다.

• Korean Chemical Engineering Research
• /
• 제60권3호
• /
• pp.377-385
• /
• 2022

우리나라 전통 숯가마로부터 제조된 숯의 표면형상과 흡착특성을 분석한 후, 습도와 온도를 조절하면서 이들의 수분 흡착성능을 측정하고 황토, 활성탄소섬유 직포 및 활성탄소섬유 종이의 수분 흡착성능과 비교하였다. 숯은 소수성이므로 45% 이하의 습도에서는 수분을 잘 흡착하지 않지만 습도가 증가하면 흡착성능이 서서히 1차식에 비례하여 증가하였다. 황토 분말도 낮은 습도에서는 숯과 유사했지만 습도가 증가하면 흡착성능이 기하급수적으로 증가하면서 Type V 등온흡착곡선을 보였다. 따라서 조선시대에 기상청 직원들이 숯과 황토의 수분 흡착능력을 일기예보에 적용하였다는 기록을 실험적으로 확인할 수 있었다. 활성탄소섬유 직포와 활성탄소섬유 종이는 수분 흡착능력이 월등하고 신속한 반응을 보이므로 습도측정 센서에 적용할 수 있다고 판단된다. 숯 조각의 등온흡착 및 탈착곡선 측정에서 흡착질인 질소의 탈착이 잘 이루어지지 않아 낮은 압력 이력현상(low-pressure hysteresis)이라는 독특한 Type I과 Type IV의 혼합형태를 보이는데, 이는 질소입자가 흡착시에 숯 세공의 틈새를 비비고 들어가 단단히 끼었다가 탈착시에 빠져나오지 않기 때문이다. 숯을 분말로 분쇄하면 이러한 틈새들이 분쇄되어 비표면적이 증가하고 낮은 상대압력에서 흡착질의 탈착량이 증가되었다.

• 한국가구학회지
• /
• 제22권1호
• /
• pp.13-17
• /
• 2011

Recently, interest in indoor air quality is increasing. Especially, radon radioactivity among the indoor air is a well-known risk factor for lung cancer because of ionizing radiation in the form of ${\alpha}$-particles. This study was carried out to investigate effect of black charcoal and activated carbon for reduction of radon radiation that emitted from building materials. Black charcoal and activated carbon were used as a barrier which was against the infiltration of radon. The source of radon was gypsum board. Two types of charcoal barrier were powder- and board-type with 5 mm, 10 mm thickness respectively. The method for this determination is evaluated radon concentration in chamber. The measurements were performed with radon detector, SARAD3120. Results of this study are as following: Black charcoal and activated carbon confirmed the highly efficient barrier. Radon concentration was reduced from 72% to 85% as compared the control chamber. Radon reduction capability, however, was no difference as barrier's types. Results obtained in ventilation condition, radon concentration shows 5.93 pCi/L on average in the closed condition and shows 2.69 pCi/L in the opened condition.