• 한국음향학회지
• /
• 제29권3호
• /
• pp.165-172
• /
• 2010

실제 해양환경에서 수직 배열 트랜스듀서들의 위상 변동 특성과 각 트랜스듀서간의 상관관계를 구하는 것은 수중에서의 통신 기법을 결정하는데 중요하다. 본 논문은 동해시 인근 천해 해역에서 시간에 따라 이동하는 탐침 음원에서 전송하여 수직 배열 트랜스듀서들에 수신된 탐침 신호들을 기반으로 수심에 따라 달라지는 수신 신호의 위상 특성을 분석하였다. 그리고 트랜스듀서간의 거리와 송수신기간의 거리를 바꿔가면서 각 트랜스듀서간의 상관관계를 분석하였고 상관관계 변화에 따르는 이론적인 통신 전송 용량 변화를 구하였다.

• 한국물환경학회지
• /
• 제27권2호
• /
• pp.228-234
• /
• 2011

The goal of water quality management on stream and watershed is to focus not on discharged loads management but on a water quality management. Discharged loads management is not goal of water quality management but way for perform with total maximum daily loads management. It is necessary to estimate the relation between non-point source with stromwater runoff (NPSSR) and water quality to select a watershed where it is required to manage NPSSR for water quality improvement. To evaluate the effects of NPSSR on stream's water quality, we compare the aspects of water quality in dry and wet seasons using flow duration curve analysis based on flow rate variation data by actual surveying. In this study we attempt to quantify the variation characteristic of water quality and estimate the Inflow characteristic of pollution source with water quality and flow rate monitoring on 10 watersheds. We try to estimate water quality and flow rate by regression analysis and try again regression analysis with each high and low water quality data more than estimations. An analysis of relation between water quality and flow rate of 10 watersheds shows that the water quality of the Nonsan and the Ganggyeong streams had been polluted by NPSSR pollutants. Other eight streams were important point source more than NPSSR. It is wide variation range of $BOD_5$ also high average concentration of $BOD_5$. We have to quantify water quality variation by cv1 in wet season and cv365 in dry season with comparing the estimate of high water quality and low water quality. This method can be used to indicator for water quality variation according to flow rate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.244-246
• /
• 2005

The Tonpiltz transducer is one of the essential elements in sonar application. The characteristics of transducer depend on the piezoelectric ceramics and mechanical elements such as head mass, tail mass, pre-stress rod and so on. One of the important characteristics is stable electric resistance for high power transmitting operation. This paper presents characteristics variation of the underwater acoustic transducer with material variation of electric decoupler.

• 상하수도학회지
• /
• 제20권3호
• /
• pp.451-460
• /
• 2006

While sludge settles down in a batch column, sludge concentration becomes high. Sludge concentration change is one of the most critical causes of the sludge settling velocity variation. Therefore, sludge concentration change causes sludge index to change. SVI is more sensitive than other sludge indexes to the change of sludge concentration. And if sludge-water interface has reached final height within 30minutes, SVI is not suitable for prediction of sludge settling characteristic, Therefore, SVIs of each sludge are, in some cases, different although each sludge has the same settling velocity. But SVI has been widely used to interpret sludge settling characteristic by a simple testing method. This work has two purposes. The first purpose is to predict sludge settling velocity by using sludge-water interface settling velocity. And the second purpose is to develop new sludge settling characteristic index to exactly interpret sludge settling characteristic by overcoming the limit of SVI.

• 한국항공우주학회지
• /
• 제42권2호
• /
• pp.144-149
• /
• 2014

우주발사체 자세제어용 하이드라진 추력기의 추력실 특성길이($L^*$) 변화에 따른 연소성능을 확인하기 위해 개발모델 추력기에 대한 지상연소시험을 수행하였다. 각각의 추력기에 대한 성능특성이 추진제 주입압력 2.41 MPa (350 psia)에서의 정상상태 추력, 비추력, 응답특성 및 특성속도 등과 같은 성능변수로 분석되었다. 시험결과, 표준모델 대비 추력실 특성길이의 증가와 감소에 따라 특성속도 및 비추력성능이 공히 감소하였던 바, 표준모델의 추력실 형상이 요구성능에 대하여 가장 적합하게 설계되었다는 사실이 확인되었다.

• 대한의용생체공학회:의공학회지
• /
• 제30권2호
• /
• pp.129-134
• /
• 2009

The ideal method which measures a blood vessel of senility and degree of arteriosclerosis is to measure compliance of arterial and condition of blood circulation at the periphery. In these days vascular stiffness have been assessed by analyzing PTT (pulse transit time) from ECG and PPG. PTT is that between toe and finger each subject estimated through ECG and PPG signals. Two parameters, which are related to PWV, were tested with the time delay between the finger and toe. PWV is a variation of quantity which is associated with vascular stiffness. These researches which use PTT and PWV don't consider the blood vessel characteristic of an individual. In this current research, we have used with the blood vessel characteristic of an individual. That is an assessment of vascular stiffness using the variation of quantity in PWV with the changes of position in the subject. PWV variation increased as functions of the subject's age. The increase of the PWV variation parameters with age is attributed to the direct decrease of the blood vessel compliance with different position. The quantity of variation estimated by experimental results is that old age's (75.78${\pm}$7.75) case is 113.68% and young age's (26.47${\pm}$2.04) case is 85.69%. We proved and presented about estimation of vascular stiffness of possibility by this result.

• 한국유체기계학회 논문집
• /
• 제9권6호
• /
• pp.22-28
• /
• 2006

Operation of a microturbine was simulated on the basis of component characteristic parameters obtained from performance test. Characteristic parameters, such as compressor and turbine efficiencies, recuperator effectiveness as well as turbine inlet temperature, were obtained for a wide operation range. Component characteristics including performance maps and characteristic curves were generated using measured data. Based on the component characteristics, a simulation program was constructed and operation of the microturbine was simulated, and the simulated results were compared with the measured data to verify the program. Also, influence of variation in the power control scheme on the operating characteristic and performance of the engine was simulated. The simulation program can be used for predicting operation of both healthy and degraded engine conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.763-764
• /
• 2006

In this paper, optimized model was designed for the starting characteristic of the Single-Phase Line-Start Permanent Magnet Synchronous Motor by using the Design of Experiment. A field pole angle, thickness and distance from center axis of permanent magnet were selected as design factor. We executed the transient state characteristic analysis of 8 test models. The transient state characteristic analysis was executed by using the 2 dimensional Finite Element Method and the Time Difference Method. We checked the fact that the selected design factor affected starting characteristic of the Line-Start Permanent Magnet Synchronous Motor. Depend on this result we found the optimized design point by using the response optimization.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권3호
• /
• pp.98-103
• /
• 2001

This paper presents the numerical analysis of piezoelectric devices using three-dimensional finite element analysis. The characteristic of piezoelectric transducer, such as mechanical displacement and electrical are analyzed and the validity is confirmed by experiments Applying the finite element routine to a piezoelectric transformer, the resonance features electrical impedance. the ratio of step-up voltage and vibration mode of piezoelectric transformer are calculated numerically By using three-dimensional finite element method effects of width variation to resonance features, electrical input impedance and the voltage step-up ratio for a piezoelectric transformer, can be considered in design procedure.

• 한국전자통신학회논문지
• /
• 제8권1호
• /
• pp.113-119
• /
• 2013

본 논문에서는 수 변전 설비의 열화진단을 위해서 열화상 카메라로 측정한 온도에 대한 시계열 데이터를 이용하여 포엔카레 맵과 프랙탈 차원에 의한 패턴 변화에 따른 온도 변화 특성을 살펴보았다. 시뮬레이션 결과 포엔카레 맵과 상관 차원에서 비선형적인 특성 거동을 확인할 수 있었다. 앞으로 추가적인 연구를 통한 검증 방법이 요구된다.