• Journal of Advanced Marine Engineering and Technology
• /
• 제29권3호
• /
• pp.281-289
• /
• 2005

An experimental study on the heat transfer and friction characteristics of a fully developed turbulent air flow in a square channel with $45^{\circ}$ inclined ribs on one, two, and four walls is reported. Tests were performed for Reynolds number ranging from 7,600 to 24,900. The pitch-to-rib height ratio, p/e, was kept at 8 and rib height-to-channel hydraulic diameter ratio, $e/D_h$, was kept at 0.0667. The heat transfer coefficient and friction factor values were enhanced with the increase in the number of ribbed walls. Results of this investigation could be used in various applications of internal channel turbulent flows involving different number of roughened walls.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2751-2761
• /
• 1994

A numerical investigation on the three-dimensional laminar natural convection heat transfer in the periodically fully developed PCB channel has been performed. When heat generating blocks mounted on the adiabatic wall make a channel with their facing shrouding wall, the flow inside the channel becomes periodically fully developed. A single module in the periodically fully developed region is chosen for computational domain in order to save computer storage and computational time. The periodic boundary condition is applied in the anlaysis. The effects of the parameters such as the Rayleigh number, the number of the modules, and the height of channel are examined to obtain the optimum condition for the enhancement of the cooling effectiveness. The result shows that the cooling effect is improved with increasing Rayleigh number and channel height, and decreasing the number of the module. The result also indicates that increasing the height of the channel and number of the module is recommended for a limited space.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.879-887
• /
• 2003

The flow in a parallel walled test channel, when obstructed with a geometry at the entrance, can be forward, reverse and stagnant depending on the position of the obstruction. This interesting flow phenomenon has potential benefit in the control of energy and various flows in the process industry In this experiment, the flat plate obstruction geometry was used as an obstruction at the entry of the test channel. The parameters that influence the flow inside and around the test channel were the gap (g) between the test channel and the obstruction geometry, the length (L) of the test channel and the Reynolds number (Re). The effect of the gap to channel width ratio (g/w) on the magnitude of the velocity ratio (V$\_$i/ / V$\_$o/ : velocity inside/ velocity outside the test channel) was investigated for a range of Reynolds numbers. The maximum reverse flow observed was nearly 20% to 60% of the outside velocity for Reynolds number ranging from 1000 to 9000 at g/w ratio of 1.5. The maximum forward velocity inside the test channel was found 80% of the outside velocity at higher g/w ratio of 8. The effect of the test channel length on the velocity ratio was investigated for different g/w ratios and a fixed Reynolds number of 4000. The influence of the Reynolds number on the velocity ratio is also discussed and presented for different gap to width ratio (g/w). The flow visualisation photographs showing fluid motion inside and around the test channel are also presented and discussed.

• 한국유체기계학회 논문집
• /
• 제12권1호
• /
• pp.51-56
• /
• 2009

The detailed heat transfer coefficient on a rotating dimpled channel were measured using the transient liquid crystal technique. The channel height to dimple diameter was 2, dimple center distance to dimple diameter was 1.5 and channel aspect ratio was 4. Tested Reynolds number based on the channel hydraulic diameter was varied from 15000 to 35000 and corresponding rotation number was ranged from 0.026 to 0.057. Results showed that the Coriolis force by rotation enhanced the heat transfer coefficient on the trailing surface. As the Reynolds number increased, i.e. rotation number decreased, the heat transfer coefficient increased and the thermal performance factor decreased.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1998년도 Proceedings The 4th International Transport Symposium
• /
• pp.91-99
• /
• 1998

Generally, the tons lifted and ton-kilometers are widely used to analyze the road freight transport. However, these two indicators are simply to show the road freight transport statistics rather than to explain the road freight transportation systems. In this study, the variables such as the number of distribution channel levels, the integral distance, tons in transport and the average transport distance are defined and estimated to investigate the road freight transport system of Korea. In order to compare the road transport system of Korea to other countries, the comparative study was conducted including USA, Japan, Holland and Taiwan. The major findings of this study are as follows; i) The number of distribution channel levels and integral distance of Korea and Taiwan have been increased, but the average transport distance decreased from 1971 to 1996 period. ii) On the contrary to Korea case, the number of distribution channel levels and integral distance of US, Japan and Holland have been decreased, but the average transport distance increased. iii) In the time-series model analysis shows that the number of distribution channel levels are statistically positively closely related to the logistics costs and the costs of transportation as a percentage of GDP.

• Ecology and Resilient Infrastructure
• /
• 제6권4호
• /
• pp.314-327
• /
• 2019

본 연구에서는 본 연구에서는 2차원 수치모형을 적용하여 수제설치에 의한 흐름특성을 분석하고, 하도의 안정성을 평가할 수 있는 평가방법을 개발하였다. 2차원 수치모형의 결과는 관측자료와 1차원 모형의 결과와 비교하여, 그 적용성을 검토하였다. 평가 지표는 대상구간의 수리 및 지형학적 특성을 고려하여 하폭 대 수심의 비, 사행도, 하상경사, 하안 부근에서 유속, Shields number 등 5가지 항목으로 구성하였다. 낙동강의 달성보~강정고령보 구간의 수제 설치 전·후에 대해 평가지표를 적용하여 하도 안정성을 평가하였다. 평가 항목 중에서 하폭 대 수심의 비, 사행도, 하상경사는 하도의 안정성에 영향을 크게 주지 않는 것으로 평가되었다. 양안 부근에서 유속과 유사의 이동 특성을 결정하는 무차원 소류력인 Shields Number는 수제에 의하여 영향을 받으며, 수제의 수가 증가할수록 평가 값은 감소하고, 하안의 안정성은 증가하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.1109-1112
• /
• 2005

멀티캐리어 DS-CDMA시스템은 동일 시점에서 파일롯 채널을 제외한 모든 부채널에 동일 한 데이터가 전송된다. 이때 채널 추정을 위한 파일럿 채널의 수가 증가하게 되면 보다 정확한 채널 추정이 가능하나 데이터 채널의 감소로 인해 주파수 다이버시티의 효과가 크게 줄어들게 되어 전체적인 시스템성능을 저하시키게 된다. 따라서 파일롯 채널과 데이터 채널의 수에 대한tradeoff 가 존재하며 채널환경에 따른 요구되는 최적의 파일럿채널의 수가 결정되어야 한다. 본 논문에서는 파일롯 채널을 이용한 채널추정을 갖는 멀티캐리어 DS-CDMA시스템의 성능을 분석하고 채널환경에 따른 최적의 파일롯 채널구조를 제시한다. 전체 전송대역폭을 일정하게 유지했을 때 특정 채널환경에서 전체 부 반송파의 개수 및 파일롯 채널의 개수에 대한 최적값이 존재한다. 본 논문에서는 이와 같은 채널환경에 따른 파일롯 및 데이터 채널의 최적값을 수학적인 분석을 통해 제시한다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.17-22
• /
• 2022

Due to the recent advances in high-speed communication technologies as well as the easy production of high-quality video contents, IPTV is becoming increasingly popular. Meanwhile, as the number of IPTV channels increases, channel search time to find the desired channel keeps increasing. In this paper, we discuss how to improve the channel search latency in IPTV, and introduce caching and prefetching techniques that are widely used in memory management systems. Specifically, we adopt memory replacement, prefetching, and caching techniques in IPTV channel search interfaces and show the effectiveness of these techniques as the number of channels are varied.

• 설비공학논문집
• /
• 제13권5호
• /
• pp.348-355
• /
• 2001

The coupled conduction and convection heat transfer from a protruding heated module in a horizontal channel with a variation of channel height is experimentally investigated. The input power to the module is 3, 7W and thermal resistance of module support is 0.06 , 1.03 and 158K/W. the Reynolds number ranged from 350 to 4500 corresponding to the inlet velocity(0.4~1.3 m/s) and channel height(11~35 mm). The results were obtained that the decrease of thermal resistance of module support reduces the module temperature by redistributing the heat flux and the overall thermal resistance of the module. In the study the effect of channel height is very significant in the adiabatic condition, but negligible in the conjugate condition. Finally, correlations for Nusselt number and $Q_B$/Q with a variation of Reynolds number were developed respectively.

• 반도체디스플레이기술학회지
• /
• 제8권2호
• /
• pp.43-47
• /
• 2009

Glass forming technology is used to form channels of external electrode flat fluorescent lamps (FFL). The efficiency of FFL depends on the number and the length of the channels. Five FFLs with same size ($300\;mm{\times}80\;mm$), different channel number, and different channel length were fabricated. The electrical and optical characteristics of 5 FFLs were evaluated. It was found that the FFL with one channel with its channel length of 1,110 mm and channel width of 7 mm corner width was shown to have the highest efficiency at room temperature operation.