• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.41-51
• /
• 2001

In this paper, we presented that the performance of the TCM(Trellis Coded Modulation) using the Euclidean distance is better than that of the convolutional code using the hamming distance under the same bandwidth efficiency. And the TCM DECODER for next generation mobile communication replacing the using convolutional decoder is implemented. Also, for the implementation of the TCM DECODER, the convolutional decoder and the TCM decoder were made by C-language and simulated under AWGN channel with respect to the hard decision and the soft decision. So we proved that performance of the TCM is better than that of the convolutional code. From this result, TCM DECODER, of which constraint length is 3, 5 or 7 and which use the soft decision method, was implemented using the AHDL(Altera Hardware Description Language) and fortified using the Max+plus H version 8.2 of Altera corporation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5A
• /
• pp.333-340
• /
• 2003

In this paper, we propose a new turbo-coded orthogonal frequency division multiplexing (OFDM) transmission scheme that can improve greatly the performance by making all the turbo-coded symbols have the same reliability for OFDM transmission over a frequency selective fading channel. The same reliability, that is, the same fading can be accomplished through multiplexing of turbo-coded symbols using distinct orthogonal codes and spreading over the whole effective subcarriers (hereafter, called as the orthogonal code multiplexing (OCM)). As for the orthogonal code selection, we choose the set of the discrete Fourier transform (DFT) basis sequences, since the code set holds the orthogonality irrespective of the length and also has the equal energy property. We perform computer simulations using the Log-maximum-a-posteriori (Log-MAP) algorithm for iterative decoding in order to assess the performance of the proposed transmission scheme.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.226-231
• /
• 2008

The heat transfer characteristics of a solar high-temperature receiver with heat pipes was investigated by numerical simulation. The concentration ratio of the solar receiver ranges 1000 and the concentrated heat is required to be transported to a certain distance for specific applications. This study deals with internal geometry variation of a solar receiver incorporating high-temperature heat pipe. The isothermal characteristics in the receiver section is of major concern. The diameter of the solar thermal receiver was 120 mm and the length was 400 mm. The angle of receiver end wall was varied between $0^{\circ}$ and $45^{\circ}$. The wall thickness of the heat pipe channel was 4mm and 48 axial channels of the same dimensions were attached to the outer wall of the receiver with even spacing in the circumferential direction. The channels are changed to high-temperature sodium heat pipes. Commercial softwares were employed to deal with the radiative heat transfer inside the receiver cavity and the conduction heat transfer along the channels. The numerical results are compared and analyzed from the view Point of high-temperature solar receiver.

• Membrane Journal
• /
• v.26 no.4
• /
• pp.291-300
• /
• 2016

Techniques for selectively separating molecules of gas and liquid states using various separation membranes have been widely used in variety of applications such as chemical, biological, pharmaceutical, and petrochemical industries. As the nanochannel diameter, inter-channel distance and length of the nanochannel of the anodic aluminum oxide (AAO) membranes can be precisely controlled, various studies to effectively separate mixture of various molecules using AAO membrane have been widely carried out. In this study, we fabricated AAO membranes of cylindrical nanochannels of various diameter sizes and of through-hole structure, that is, nanochannels of which both ends of each nanochannel are open. Using those AAO membranes of through-hole nanochannel structure, we studied the selective permeation polymer chains dissolved in a solvent based on hydraulic volume of the polymer chains. We found a precise, quantitative relationship between the radius of gyration of polymer chains that permeated through nanochannels inside AAO membrane and the diameter of nanochannels. In addition, we demonstrate that the behavior of the polymer solution flowing through nanochannel of the AAO membrane can be successfully described with the Hagen-Poiseuille relationship. It is, therefore, possible to theoretically interpret the nanoflow of the solution flowing inside the cylindrical nanochannel.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.3-11
• /
• 2017

Research and development are being conducted to apply low-power Bluetooth (BLE) technology to IoT (Internet of Things) applications. The characteristic of this application environment is that many piconets can operate in the same space. Therefore, interference between homogeneous networks is likely to occur. In the BLE data channel, adaptive frequency hopping (AFH) scheme is used among the 37 frequency channels, and the master and the slave communicate while changing the carrier frequency. If there are multiple BLE piconets in the same space, there is a risk of frequency collision and packet errors will occur. In this paper, we analyze the packet collision probability due to cochannel interference in multiple asynchronous BLE piconet environments. Specifically, we analyzed packet collision probability according to the number of concurrently operating BLE piconets with the ratio of connection interval to connection event length as the main parameters. The analysis result can be used to set connection event related parameters for a desired packet collision probability according to the number of users having BLE devices in a given space.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1337-1344
• /
• 2014

The objective of an echo canceller connected to any end of a communication line such as digital subscriber line (DSL) is to compensate the outgoing transmit signal in the receiving path that the hybrid circuit leaks. The echo canceller working in a full duplex environment is an adaptive system driven by the local signal. Conventional echo canceller that implement the least mean square (LMS) algorithm provides a low computational burden but poor convergence properties. The length of the echo canceller will directly affect both the degree of performance and the convergence speed of the adaptation process. To cancel long time-varying echoes, the number of tap coefficients of a conventional echo canceller must be large, which decreases the convergence speed of the adaptive filter. This paper proposes an alternative technique for the echo cancellation in a telecommunication channel. The new technique employs the bi-directional least mean square (LMS) algorithm for adaptively computing the optimal set of the coefficients of the echo canceller, which is composed of weighted combination of both feedforward and feedback algorithms. Finally, Simulation results as well as mathematical analysis demonstrates that the proposed echo canceller has faster convergence speed than the conventional LMS echo canceller with nearly equivalent complexity of computation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.97-102
• /
• 2010

In this paper, an area-efficient FFT processor is proposed for IEEE 802.16e mobile WiMax systems. The proposed scalable FFT processor can support the variable length of 128, 512, 1024 and 2048. By reducing the required number of non-trivial multipliers with mixed-radix (MR) and multi-path delay commutator (MDC) architecture, the complexity of the proposed FFT processor is dramatically decreased without sacrificing system throughput. The proposed FFT processor was designed in hardware description language (HDL) and synthesized to gate-level circuits using 0.18um CMOS standard cell library. With the proposed architecture, the gate count for the processor is 46K and the size of memory is 64Kbits, which are reduced by 16% and 27%, respectively, compared with those of the 4-channel radix-2 MDC (R2MDC) FFT processor.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.344-349
• /
• 2018

Low temperature variation of electrical characteristics for AlGaN/GaN/HEMT was studied. To investigate the effect of temperatures, transistor was cool down to $-178^{\circ}C$ and electrical characteristics were measured. The drain current density of an AlGaN/GaN HEMT with a gate length of $2{\mu}m$ was increased from 264 mA/mm to 388 mA/mm and the maximum transconductance was increased from 105 mS/mm to 134 mS/mm by decreasing the temperature to $-108^{\circ}C$. Also, the threshold voltage was shifted -0.39 V with the temperature. The reason for the variations was seemed to the reduced channel resistance corresponding to the temperature. However, most of the variation of the electrical characteristics takes places above $-108^{\circ}C$.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1288-1294
• /
• 2019

The channel-achieving property made the polar code show to advantage as an error-correcting code. However, sufficient error-correction performance shows the asymptotic property that is achieved when the length of the code is long. Therefore, efficient architecture is needed to realize the implementation of very-large-scale integration for the case of long input data. Although the most basic fully parallel encoder is intuitive and easy to implement, it is not suitable for long polar codes because of the high hardware complexity. Complementing this, a partially parallel encoder was proposed which has an excellent result in terms of hardware area. Nevertheless, this method has not been completely generalized and has the disadvantage that different architectures appear depending on the hardware designer. In this paper, we propose a hardware design scheme that applies the proposed systematic approach which is optimized for bit-dimension permutations. By applying this solution, it is possible to design a generalized partially parallel encoder for long polar codes with the same intuitive architecture as a fully parallel encoder.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.19 no.2
• /
• pp.61-66
• /
• 2013

Background: This study tried to identify the bridge exercise posture for efficient exercise application by comparing muscle activity of buttocks and thighs according to internal-external rotation and pronation & supination in bridge exercise. Method: Nine males in their 20s living in D city were randomly selected as subjects. Muscles such as vastus medialis oblique (VMO), vastus lateralis (VL), semitendinosus (ST), biceps femoris (BF), gluteus maximus (GMAX), gluteus medius (GMED), tensor fasciae latae(TFL), and adductor longus (ADL) were measured using eight channel surface electromyogram (MyoSystem 1400A, Noraxon, USA) to measure muscle activity. Statistics process was performed through paired t test. Results: In the changes in electromyogram signals according to internal-external rotations according to internal-external rotation of shinbones, in most cases muscle activity was higher in external rotation than in internal rotation, but there was no statistical significance (p>.05). In particular, it was lower in TFL and ADL. There was no statistical significance in the comparison between two groups (p>.05). In the changes in electromyogram signals according to internal-external rotations according to pronation & supination of thighs, GMED showed significantly higher value in supination than in pronation (p>.05), and in ADL pronation is significantly higher than supination (p<.05). Conclusion: In internal-external rotation of shinbone and pronation & supination of thighs in bridge exercise, changes in muscle length can make effects on muscle activity of buttocks and thighs. Therefore, muscle strength enforcement program on buttocks and thighs through bridge exercise can make effects on patients with lower limb functional damages in clinical situations.