• 제목/요약/키워드: Channel hopping

검색결과 147건 처리시간 0.029초

다중 안테나를 적용한 UWB 시스템의 PN 부호 포착 성능 분석 (Analysis of PN Code Acquisition Performance with Multiple Antennas in a UWB System)

  • 김은철;김진영
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.69-72
    • /
    • 2005
  • In this paper, pseudo noise (PN) code acquisition performance with multiple antennas in a UWB time hopping/code division multiple access system is analyzed. The closed form for the conditional probability is derived, using the Gauss-Hermite quadrature formula, when the signal with Gaussian distribution goes through the lognormal fading channel. The performance comparison of the above mentioned schemes shows that the code acquisition performance with a diversity combining technique, especially when increasing the number of antennas, is more robust than that using no diversity.

  • PDF

지그비 네트워크에서 무선랜의 주파수 간섭을 고려한 채널 호핑 기법 (A Channel Hopping Scheme Considering Radio Frequency Interference of WLAN for Zigbee Networks)

  • 손종인;정광수
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(A)
    • /
    • pp.369-372
    • /
    • 2011
  • 최근 스마트폰 사용의 증가로 인해 지그비 네트워크는 동일한 주파수 대역을 사용하는 무선랜에 의한 간섭이 심각해졌다. 이와 같이 이기종 네트워크에 의해 발생하는 간섭 문제를 해결하기 위한 채널 호핑 기법의 연구가 활발히 이루어지고 있다. 본 논문에서는 자원 낭비와 패킷 손실을 최소화하기 위해 테이블 기반의 채널 호핑 기법을 제안한다. 제안한 테이블 기반의 채널 호핑 기법은 간섭의 발생을 채널 테이블을 통해 관리하며 이를 기반으로 채널 호핑을 수행한다. 기존 기법과의 성능 비교 실험을 통해 테이블 기반 채널 호핑 기법은 간섭 발생시 빠른 회피가 가능하고 이로 인해 네트워크의 성능을 향상시킬 수 있음을 확인하였다.

주차관제를 위한 무선 송수신 모듈 설계 및 구현 (Design and Implementation of Wireless Transceiver Module for Parking Control System)

  • 조병학
    • 정보통신설비학회논문지
    • /
    • 제8권1호
    • /
    • pp.24-29
    • /
    • 2009
  • In this paper, we show the implementation of the low-cost RF transceiver module for parking control system. Super regenerative receiver scheme was adopted for this module due to its simplicity, low-cost, low power consumption and small number of components to improve reliability of the systems. For improving communication error rate by collision and in-band noise, dual-channel hopping scheme was adopted. Testing prototypes under the environment of simultaneous transmissions, we verified that the designed scheme is able to improve the success rate of data transmission of wireless parking control system cost effectively.

  • PDF

부분주파수 충돌을 고려한 FH/SSMA (Performance Analysis of FH/SSMA Network Considering Partial Hit)

  • 홍인기;김근묵;황금찬
    • 한국통신학회논문지
    • /
    • 제18권1호
    • /
    • pp.23-31
    • /
    • 1993
  • 본 논문에서는 AWGN, 협대역재밍, 페이딩,사용자간 간섭이 혼재하는 채널에서 부호화한 FH/SSMA시스템의 성능을 분석하였다. 특히, 주파수 충돌을 고려할때 주파수 중복이 어느값보다 적으면 정보를 정확히 수신하는 것으로 가정하였다. 분석 결과, 주파수 충돌은 주파수중복 기준에 따라 선형적으로 변화하고, 에러발생 분포유형에는 별다른 변화를 주지 못했다.

  • PDF

정규화 포락선 검파기와 얼리-레이트 필터를 적용한 새로운 홉 타이밍 예측기 (A New Hop-Timing Estimator with a Normalized Envelop Detector and an Early-Late Filter)

  • 이주형
    • 한국통신학회논문지
    • /
    • 제32권4C호
    • /
    • pp.355-361
    • /
    • 2007
  • 본 논문에서 정규화 포락선 검파 기법(NED ; Normalized Envelop Detection)과 얼리-레이트 필터(ELF ; Early-Late Filter)가 적용된 새로운 홉 타이밍 예측기를 제안하였다. 제안한 구조의 성능 검증을 위해 컴퓨터 시뮬레이션으로 제안한 시스템과 기존 시스템의 동기 오차 측정 결과를 비교하였다. 시뮬레이션 결과를 통해서 부분 대역 재밍 환경에서 제안 구조가 기존 구조보다 정확하게 동기오차를 예측하는 것을 확인할 수 있었으며, 이러한 경향은 $E_b/N_j$와 재밍점유대역비(rho)가 낮을수록 더욱 뚜렷하였다.

수신 신호의 도착 지연 차이를 갖는 MIMO CDMA 채널에서 코드 동기 성능 향상 방안 연구. (A New Code Acquisition Scheme for MIMO CDMA Channel with Slightly Different Arrival Time by Hopping Pilot Data.)

  • 권윤주;구정회;김경호;이충용
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 I
    • /
    • pp.11-14
    • /
    • 2003
  • 본 논문에서는 다중안테나 시스템(Multiple-Input Multiple-Output : MIMO)과 다중코드(Multicode)를 사용하는 코드분할 다중접속(Code Division Multiple Access : CDMA) 시스템의 하향링크(from the base station to the mobile) 환경하에서 채널응답의 중요한 요소인 전송지연시간(Propagation Delay Time)이 기존의 단일안테나(Single-Input Single-Output : SISO) 채널 환경에서 다중안테나 채널 환경으로 바뀌어 적용되었을 때 발생할 수 있는 환경 변화를 찾아보고 그러한 환경이 코드 동기 성능에 미치는 영향과 그러한 문제점을 해결할 수 있는 효율적인 파일롯(Pilot) 전송 기법을 제안 하였다. 또한 모의 실험을 통하여 도착 시간 지연 차이의 분산(variance)값이 검파 성능에 미치는 영향을 확인 하였다.

  • PDF

대역확산통신에서 FH무전기의 상호간섭연구 (A Study on Co-Channel Interference of FH Spread Spectrum Communications)

  • 최은재;김제영;윤병창;배현웅;이시창
    • 한국국방경영분석학회지
    • /
    • 제16권2호
    • /
    • pp.118-134
    • /
    • 1990
  • This paper considers the mutual interference problem of several users employing the same FH systems in selected multiple user environments. The environment consists of a desired transmitter-receiver pair located in an area where there are M interfering users distributed in accordance with a specified probability density function. Both coherent Phase-Shift-Keyed and incoherent Frequencey-Shift-Keyed modulations are considered. The general formulas of the average bit error probability are derived. The calculation results are summarized and analyzed. The average bit error probability is highly dependent on the relative location of interferences to the desired link, the time duty factor of the hopping and the number of available channels.

  • PDF

산업용 사물인터넷 네트워크 기술 동향 (Technology Trends in Industrial Internet-of-Things Networks)

  • 강호용;박미룡;이승식;신창섭;박찬원
    • 전자통신동향분석
    • /
    • 제36권5호
    • /
    • pp.92-102
    • /
    • 2021
  • Owing to various restrictions in-field application, the low-speed, low-power-based industrial Internet-of-Things (IoT) network built in extremely harsh industrial environment sites requires multi-hop, channel hopping, and low-latency transmission characteristics. In the past, wired networks were used in industrial facilities; however, network technologies based on the Industrial IoT Network standard standardized for industrial applications, such as WirelessIO link, WirelessHART, SmartMesh, and eStar Link satisfy industrial requirements. Recently, the use of industrial IoT networks in industrial facilities has rapidly expanded. This paper covers the developments in industrial IoT network technologies and summarizes the major industrial IoT standard technologies that meets the requirements of industrial sites.

Path Collision-aware Real-time Link Scheduling for TSCH Wireless Networks

  • Darbandi, Armaghan;Kim, Myung Kyun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권9호
    • /
    • pp.4429-4445
    • /
    • 2019
  • As low-power and low-rate WSNs are being widely used for industrial applications, the scheduling of such applications becomes a critical issue to guarantee meeting the stringent requirements of determinism and tight latencies. This paper studies the link scheduling problem for real-time industrial applications in time-slotted channel hopping (TSCH) networks. We propose a heuristic algorithm for centralized link scheduling referred to as path-collision aware least laxity first (PC-LLF) algorithm, which dynamically prioritizes the packets based on the laxity time to the end-to-end deadlines and the amount of collisions that messages might deal with along their designated paths to the destination device. We propose schedulability analysis of real-time applications scheduled under our prioritization approach over TSCH networks, based on the literature on real-time schedulability analysis of multiprocessors and distributed systems. We show that our methodology provides an improved schedulability condition with respect to the existing approaches. Performance evaluation studies quantify to quantify the performance of our proposed approach under a variety of scenarios.

무선 BAN을 위한 다중채널 액세스 관리기법 (Multi-channel Access Control for Wireless Body Area Networks)

  • 이왕종;이승형
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2009년도 춘계학술발표대회
    • /
    • pp.1198-1201
    • /
    • 2009
  • 무선 BAN은 인체를 중심으로 3m 이내에서 이루어지는 통신을 위한 기술이다. 무선 BAN은 인체 내 외부에서 의료용 서비스를 위하여 여러 개의 채널로 구성된 MICS(Medical Implanted Communication Service) 주파수 대역을 사용한다. MICS는 다중 채널 환경에서 LBT(Listen Before Talk)와 AFA(Adaptive Frequency Agile)을 사용하여 장치간의 간섭을 최소화한다. 경쟁기반의 LBT와 AFA는 데이터 전송의 안정성을 보장하지 못할 뿐만 아니라 채널 홉핑(Hopping)으로 인한 전력 소비를 야기한다. 본 논문에서는 의료용 데이터의 주기적인 특성과 전송 안정성을 고려하여 예약 기법의 채널 액세스 관리 기법을 제안한다. 여러 채널 가운데 하나의 채널을 제어 채널로 설정하고 나머지는 데이터 전송을 위한 채널로 설정한다. 코디네이터는 제어 채널에서 beacon을 전송하여 디바이스에게 데이터 채널을 할당한다. 예약방식을 통하여 채널 할당의 안정성을 확보할 뿐만 아니라 디바이스의 요구 사항에 따라 채널을 유동적으로 결합함으로써 채널의 효율성을 개선한다. 또한 제어 채널 관리 방안을 통하여 LBT 장치와 상호 운용성을 확보하고, 시뮬레이션을 통하여 예약방식의 채널 관리 방안의 효율성을 검증한다.