• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.700-713
• /
• 2015

It is critical to design energy-efficient routing protocols for battery-limited mobile ad hoc networks, especially in which the energy-consuming MIMO techniques are employed. However, there are several challenges in such a design: first, it is difficult to characterize the energy consumption of a MIMO-based link; second, without a careful design, the broadcasted RREP packets, which are used in most energy-efficient routing protocols, could flood over the networks, and the destination node cannot decide when to reply the communication request; third, due to node mobility and persistent channel degradation, the selected route paths would break down frequently and hence the protocol overhead is increased further. To address these issues, in this paper, a novel Greedy Energy-Efficient Routing (GEER) protocol is proposed: (a) a generalized energy consumption model for the MIMO-based link, considering the trade-off between multiplexing and diversity gains, is derived to minimize link energy consumption and obtain the optimal transmit model; (b) a simple greedy route discovery algorithm and a novel adaptive reply strategy are adopted to speed up path setup with a reduced establishment overhead; (c) a lightweight route maintenance mechanism is introduced to adaptively rebuild the broken links. Extensive simulation results show that, in comparison with the conventional solutions, the proposed GEER protocol can significantly reduce the energy consumption by up to 68.74%.

• Journal of Korea Water Resources Association
• /
• v.35 no.5
• /
• pp.485-500
• /
• 2002

Hydraulic model was developed to analyze the complex flow due to channel structures, tide, and tributaries in the lower Han river and Imjin river. DWOPER-2K model which can automatically process the data transformation in the model was developed as the 1-D hydraulic routing model. Observed data in tidal zone and the recent channel geometry data were collected for hydraulic model. And the flow over the Jamsil and Singok submerged weir was analyzed properly and roughness coefficient was optimized to each regions and each discharges. By the results of verification of the model, the model developed in this study may contribute to improvement of the accuracy of flood forecasting and channel management because this model can efficiently and properly analyze the various kind of flow occurred in the region of the lower Han river and Imjin river.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3B
• /
• pp.277-284
• /
• 2010

To examine how the width of connecting channels, the width of the Kumho lock gate, and the opening/shutting criteria of the Yeongam connecting channel lock gate affect the flood stage of Lake Yeongsan, Lake Yeongam, and Lake Kumho, located in the lower reaches of the Yeongsan River, unsteady flood routing was performed by connecting the three lakes into a single interlinked system. The coupled operation of the three lakes was found to have little effect when the widths of the lock gates and the Yeongam and Kumho connecting channels are set at the current level. The most effective way to lower the water level in Lake Yeongsan was to widen the Yeongam connecting channel, but this caused the water level in Lake Yeongam to rise. To lower the increased water level in Lake Yeongam by utilizing the water storage capacity of Lake Kumho, it was necessary to widen both the Kumho lock gate and the Kumho connecting channel. It was found that the optimum opening/shutting criterion for the Yeongam connecting channel lock gate is approximately EL.(+)0.8 m under the simulated conditions used in this study and the criterion allows of maximal lowering of the water levels in Lake Yeongam and Lake Kumho while maintaining a near-constant water level in Lake Yeongsan.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.537-548
• /
• 2013

In this study, the hydraulic channel routing model was constructed to analysis the effect of flood control with the operation of Chungju Dam for 2006 flood. Study area was divided with up- and downstream of Chungju Dam in the upper Han River of Paldang Dam. The model was calibrated and verified for the flood event of 1995-2008. The effects of flood control of Chungju Dam were compared with the simulation results without the dam, and the rising effects of stage in the main observation stations were analyzed by the variation of released dam discharge. Consequently, the operation of Chungju Dam for 2006 flood was performed properly, but the effects of flood control of Chungju Dam were so focused in downstream of the dam that institutional complement was demanded to reduce the flood damage in the upper region of the dam. The limit of decision rule of downstream stage in the backwater region of dam was analyzed to solve the problem, and the decision rule of downstream stage was proposed to consider the discontinuity between the backwater region of dam and the design flood of upper stream. The proposed rule will be used to design the reduction of flood damage in upper stream of dam and to apply the analysis of region for flood damage.

• Journal of Korea Water Resources Association
• /
• v.31 no.2
• /
• pp.189-198
• /
• 1998

Five dam-break floodwave models are t재 field data sets. The models included FLDWAV, SMPDBK, HEC-1, Tr66, and HEC Dimensionless Graph. The field data sets documented the disasters at Teton dam, and Yeunchun dam. The FLDWAV results are uesd to test the sensitivity of the floodwave to variations in Manning's roughness coefficient, breach size, and bottom slope. The HEC-1 analysis includes testing the sensitivity of the results to model parameters. The TR66 model and FLDWAV, with channel routing by TR66 in both cases. SMPDBK and the Dimensionless Graph procedure are applied without particular difficulties being encountered in both real world cases. It is necessary to analyze numerical limit of existing numerical models and then to apply the relatively accurate numerical model in real basin. It is found that FLDWAV model is superior in numerical accuracy and stability to any other model. This study will contribute to improve defect of numerical models and develop more precise numerical model for a efficient and rapid dam breach flood disaster predict.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1990.07a
• /
• pp.29-39
• /
• 1990

측방유입수가 고려되는 3변수 Muskingum하도추적모형을 낙동강수계중 왜관에서 적포교구간의 12개 홍수사상에 대하여 적용하였고, 기존방법인 2변수 Muskingum방법의 저류상수 K와 가중계수 x에 추가된 $\alpha$는 측방유입수를 고려해주는 변수이다. 3변수모형의 추적방정식은 유한차분 방정식으로 표현되며, 추적상수 결정은 Matrix Inversion에 의하여 직접 계산가능하며, 이로부터 각홍수사상의 K x $\alpha$값을 구할수 있다. 본 연구를 실유역에 적용하여 실측치와 비교하여본 결과 비교적 잘 맞음을 알 수 있었으며, K와 x값은 하도특성인자로서 홍수규모와 관계되고 측방유입인자 $\alpha$는 항특성에 의하여 지배되는 변수로 측방유입량이 클수록 값이 커지는 성향으로 나타났다.

• Ecology and Resilient Infrastructure
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2016

River restoration has recently progressed in consideration of ecological functions along with flood controls and conservation. For river restorations that consider ecological health and diversity, it is important to contemplate the recovery of hydraulic and hydrologic connectivity in isolated spaces by longitudinal structures. In this study, as a first step for the provision of hydraulic and hydrologic data, which is necessary for the ecological connection analysis in isolated spaces, we developed a one-dimensional numerical model for rainfall runoff and channel routing and applied it to the Cheongmi watershed. The developed numerical model can simulate hydraulic and hydrologic analysis at the same time using the rainfall data. Numerical results were compared with observed data and other numerical results. As a result, a very reasonable agreement is observed. The results of this study will be improved so that the long-term hydrologic and hydraulic analysis is possible to predict ecological change.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.149-153
• /
• 2009

Physics-based distributed rainfall-runoff models are now commonly used in a variety of hydrologic applications such as to estimate flooding, water pollutant transport, sedimentation yield and so on. Moreover, it is not surprising that GIS has become an integral part of hydrologic research since this technology offers abundant information about spatial heterogeneity for both model parameters and input data that control hydrological processes. This study presents the development of a distributed rainfall-runoff prediction system for the Guem river basin ($9,835km^2$) using an Object-oriented Hydrological Modeling System (OHyMoS). We developed three types of element modules: Slope Runoff Module (SRM), Channel Routing Module (CRM), and Dam Reservoir Module (DRM) and then incorporated them systemically into a catchment modeling system under the OHyMoS. The study basin delineated by the 250m DEM (resampled from SRTM90) was divided into 14 midsize catchments and 80 sub-catchments where correspond to the WAMIS digital map. Each sub-catchment was represented by rectangular slope and channel components; water flows among these components were simulated by both SRM and CRM. In addition, outflows of two multi-purpose dams: Yongdam and Daechung dams were calculated by DRM reflecting decision makers' opinions. Therefore, the Guem river basin rainfall-runoff modeling system can provide not only each sub-catchment outflow but also dam inand outflow at one hour (or less) time step such that users can obtain comprehensive hydrological information readily for the effective and efficient flood control during a flood season.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.709-713
• /
• 2008

관로의 수리학적 홍수추적은 정확성을 기할 수 있다는 장점이 있으나 2차원 해석을 할 경우 광범위한 관망의 개별적인 계산이 요구되어 계산시간이나 수월성 측면에서 어려움이 있다. 이에 본 연구에서는 2차원 관망을 1차원으로 전환시키는 방법인 등가하천 개념을 도입하여 도시유역의 유출량 산정에 있어서 여러 지선들을 개별적으로 모의하지 않으면서도 실제 존재하는 지선들의 효과를 고려할 수 있는 방법을 개발하고자 하였다. 등가하천 개념의 관망 적용을 통해 등가관로의 수리기하조건을 유도하였으며 이를 이용하여 관망 간략화 홍수추적을 수행하였다. 등가관로 홍수 추적을 위해 Saint-Venant 방정식에서 유도된 비선형 확산파 방정식이 사용되었으며 이의 수치모의를 위해 양해법을 이용하였다. 본 연구에서는 등가하천 개념 적용을 통해 결정된 군자배수구역의 등가관로 수리매개변수인 파속 및 확산계수를 이용하여 확산파 방정식에 의해 홍수추적을 실시하였고, 그 결과를 SWMM에 의한 2차원 관망 해석결과와 비교하였다. 검토결과 등가관로를 통한 홍수추적결과가 실제 관망분포를 그대로 고려했을 경우를 잘 재현하는 것으로 나타나 등가하천개념의 도시유역 적용성을 확인할 수 있었다.

• Journal of Korea Water Resources Association
• /
• v.39 no.6 s.167
• /
• pp.487-494
• /
• 2006

The flood discharge on the rising limb of a hydrograph at Hwawon station greatly differs from the flood discharge on the falling limb for the same stage. When there is such a big hysteresis, there can be a significant amount of errors in the rated discharge obtained from a simple rating curve. To reduce errors in rated discharges, a looped rating curve was established for Hwawon station in the Nakdong River. In order to compute the deviation between real discharges and simply rated discharges, a simple rating curve was established using the stage and discharge data from the results of a hydraulic channel routing. The relationship between the discharge deviation ${\Delta}Q$ and a product of B and ${\Delta}h/{\Delta}t$ was analysed, where B is the channel topwidth; ${\Delta}h$ is the stage increment; At is the time increment. Strong relation between ${\Delta}Q$ and $B{\Delta}h/{\Delta}t$ was found. The discharges calculated from the relationship show differences by 10 % or less for the 7 observations out of 11 observations in 1997 whose stages exceeds 7 m. The observed discharges for the stages over 9 m in 1998 also show small difference with the discharges estimated from the loop rating curve. Looped rating curve is recommended, instead of the simple rating curve to reduce the errors of rated discharges for gauging stations like Hwawon, which has relatively large loop width.