• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.2
• /
• pp.99-105
• /
• 2012

The focus of this paper is a proposal for a computationally efficient dynamic subcarrier allocation (DSA) algorithm for orthogonal frequency-division multiple access (OFDMA) systems. The proposed DSA algorithm considerably reduces the computational complexity and the amount of channel quality information (CQI) compared to amplitude craving greedy (ACG) algorithms, which use full CQI. At the same time, the performance of the proposed algorithm closely appear to ACG algorithms. Moreover, the authors present a new bandwidth-assignment algorithm produced by modifying bandwidth assignment based on the signal-to-noise ratio (BABS). This modified BABS algorithm enables the proposed DSA algorithm to produce a strong outage performance gain over the conventional scheme.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.802-805
• /
• 2005

A dynamic bandwidth allocation (DBA) scheme, an inter -optical network unit (ONU) bandwidth scheduling, is presented to provide quality of service (QoS) to different classes of packets in Ethernet passive optical networks (EPONs). This scheme, referred to as TADBA, is based on efficient threshold reporting from, and adaptive polling order rearranging of, ONUs. It has been shown that the network resources are efficiently allocated among the three traffic classes by guaranteeing the requested QoS, adaptively rearranging the polling orders, and avoiding nearly all fragmentation losses. Simulation results using an OPNET network simulator show that TADBA performs well in comparison to the available allocation scheme for the given parameters, such as packet delay and channel utilization.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.11 no.1
• /
• pp.16-22
• /
• 2012

Wireless data communication is easy to be affected by channel noise and degrade reliability and stability by the multipath fading and ISI compared with wired data communication. In this paper, we designed and implemented indoor wireless modem adopted DQPSK modulation scheme for improvement of bandwidth efficiency, and convolutional encoding, Viterbi decoding and hybrid ARQ algorithm combinig FEC with CRC for efficient error control in indoor wireless channel. Testing the implemented wireless modem, we verified the proposed scheme is proper to efficient and reliable indoor wireless data communication.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1355-1359
• /
• 2004

The two way subscriber transmission systems have tendency to spread its carrier frequency bandwidth or information bit rate and average bit error rate according to popularization of high speed information through the digital communication system, transmission medium and the Internet. This fact is an important incentive to realize new systems. These two way subscriber transmission systems usually use same cable or same carrier frequency bandwidth for up stream channel and down stream channel. In the systems, the disturbances of noise, crosstalk or fading affect the characteristics. Specifically, these disturbances cause the decrease of information bit rate and degradation of transmission quality. This paper proposes the improved method of their degradations using the particular feature of two way subscriber transmission systems and it makes clear proposed method is effective by theoretically and some numerical examples.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.4
• /
• pp.505-513
• /
• 2006

A linear power amplifier is particularly emphasized on the system using a linear modulations, such as 16QAM and QPSK with pulse shaping. because intermodulation distortion which causes adjacent channel interference and co-channel interference is mostly generated in a nonlinear power amplifier. In this paper, parameters of a linearization loop, such as an amplitude imbalance a phase imbalance and a delay mismatch, are briefly analyzed to get a specific cancellation performance and linearization bandwidth. Experimental results are presented for IMT-2000 frequency band. The center frequency of the feedforward amplifier is 2140 MHz with 60 MHz bandwidth. When the average output power of feedforward amplifier is 20 Watt. the intermodulation cancellation performance is more than 21 dB. In this case, the output power of feedforward amplifier reduced 3.5 dB because of extra delay line loss and coupling loss. The feedforward amplifier efficiency is more than 7.2 % for multicarrier signals, 59 dBc for ACPR.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.83-92
• /
• 2001

In this paper, the monopulse channel receiver which can be matched between channels through a wide bandwidth has been proposed. The effects of the gain and phase imbalance between channels on the slope of monopulse error signal were analyzed. Also, the matching method between channels in a wide bandwidth was proposed, by which monopulse slope could be stabilized. Using the implemented monopulse radar system the monopulse slope was measured in the anechoic chamber which include the moving horn antenna and the target signal generator. The results show that the wide band matching method is useful and applicable to various channel receivers

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.242-245
• /
• 2003

This paper introduces a new algorithm of pulse generation and detection for UWB communication system. The existing UWB systems using Gaussian pulse have some difficulties to cope with bandwidth limitation and frequency transition. Moreover. the system sensitivity to channel noise has made the processes of acquisition and tacking difficult. in this paper, we introduce a new pulse generation method which is able to control the bandwidth and center frequency applying modulation method. thus could improve the detection performance of receiving algorithm. Also, we made a system to search maximum perk by applying the proposed algorithm and consequently could guarantee the correct detection. By the result of simulation, when accumulate 10 times at every 2dB band shifting from 0 to 18dB on AWGN channel, we could confirm the proposed method has 97.4% PDR(Pulse Detection Rate) and 1.868% FAR(False Alarm Rate) performance at 4dB SNR and 15% transmission power threshold level.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1176-1185
• /
• 2005

A linear power amplifier is particularly emphasized on the system using a linear modulations, such as 16QAM and QPSK with pulse shaping, because intermodulation distortion which causes adjacent channel interference and co-channel interference is mostly generated in a nonlinear power amplifier. In this paper, parameters of a linearization loop, such as an amplitude imbalance, a phase imbalance and a delay mismatch, are briefly analyzed to get a specific cancellation performance and linearization bandwidth. Experimental results are presented for IMT-2000 frequency band. The center frequency of the feedforward amplifier is 2140 MHz with 60 MHz bandwidth. When the average output power of feedforward amplifier is 20 Watt, the intermodulation cancellation performance is more than 21 dB. In this case, the output power of feedforward amplifier reduced 3.5 dB because of extra delay line loss and coupling loss. The feedforward amplifier efficiency is more than 7.2 % for multicarrier signals, 59 dBc for ACPR.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.5
• /
• pp.575-582
• /
• 2007

In this paper, a 100 Watt high power amplifier has been implemented and performed evaluation, which is operating at UHF band ($470\;{\sim}\;806\;MHz$) for Digital TV repeater. To achieve increase of bandwidth and high power capability, 3-way power combiner and divider of Wilkinson type was adopted. In order to measure the fabricated 100 Watt power amplifier, the estimation technique function which makes equivalent mask was used. As a result of the measurement, the existence of pilot signal is confirmed and the signal transmitted at the rated output power 100 Watt is brought out the flat feature through 6 MHz bandwidth. and it resulted that its value was less than -47 dB at the edge of radiation channel and less than -110 dB at more than 6 MHz position from channel edge.

• Journal of Communications and Networks
• /
• v.6 no.2
• /
• pp.123-132
• /
• 2004

The various challenges to realize a fixed wireless ATM network are discussed and some solutions for these challenges are presented. In this paper, the capacity allocation in wireless ATM, the wireless link impact on ATM traffic, and the optimum utilization of the wireless network resonrces for a line of sight (LOS) winless ATM link are studied. An adaptive MQAM modulator is introduced to provide a suitable solution to these issues. The modulator level is adjusted using a unique QoS metric in a wireless network. The metric, termed modified effective bandwidth, takes into account the bandwidth demand, QoS requirements, and outage conditions of the wireless ATM link. A performance study using VBR MPEG-l video traffic in a fixed wireless channel (Ricean channel) demonstrates the advantages of the proposed system.