• 정보통신설비학회논문지
• /
• 제3권2호
• /
• pp.51-60
• /
• 2004

A광섬유 용융인장방법에 의해서 100GHz 채널간격을 갖는 DWDM용 8채널 광다중화기를 제작하였다. 8채널 광다중화기는 전광섬유형 Mach Zehnder 간섭계(MZI)를 3단으로 다단 연결하여 제작되었으며, 광다중화기 채널별 출력파장의 삽입손실을 균일하게 하기 위하여 파장에 대한 삽입손실변화가 적은 파장무의존형 커플러(WFC)를 이용하여 전광섬유형 MZI를 제작하였다. 광다중화기를 구성하는 광섬유형 MZI를 제작함에 있어서 경로차에 따른 출력 파장간격의 변화를 시뮬레이션을 통하여 알아보았고 다단연결에 의한 광다중화기 구현방법을 논의하였다. 전용 제작 장치를 이용하여, 전광섬유형 MZI를 제작하였으며, 미세한 파장을 저절하기 위해서, $CO_2$ 레이저를 이용하였다. 제작된 8채널 광다중화기는 평균 삽입 손실 2.1dB, 5.5dB에서의 통과대역폭이 0.8nm 이며, 25dB의 채널 Crosstalk를 갖는 특성을 얻을 수 있었고, 편광의존손실은 0.06dB 였다.

• 한국농공학회지
• /
• 제14권3호
• /
• pp.2703-2715
• /
• 1972

본 실험 연구는 흙수로내에서의 용수손실에 관한 연구로서 물을 필요로 하는 논과 밭까지 필요한 시기에 필요한 양만큼을 보급해 주어야 하는 관개계획을 수립함에 있어 매년 높아져 가는 사수위에 늘어가는 필요 수량과의 함수관계를 해결하는 지표를 주는데 목표을 두었다. 시험은 용수계통인 간선, 지선, 분선수로로 구분하여 간선수로에서는 1,000m 구간을 잡아 유속계측정 방법으로 지선수로에서는 500m 구간을 잡아 상 하류에 파야샬후륨을 설치하여 측정하였으며 분선수로에서는 200m 구간을 상 하류에 사각예언웨어를 설치하여 손실을 측정하였으며 기타손실에 영향을 주는 제요인들도 조사하여 다음 결과를 얻었다. (1) 1,000m 구간의 간선수로에서는 9.64%의 통수손실을 보였으며, 500m 구간의 지선수로에서는 15.55%. 200m 구간의 분선수로에서는 12.34%의 통수손실율을 보였다. (2) 삼투량조사는 지선수로를 40m 간격으로 3번 반복조사에서 2.08cm/day 또 200m 간격의 지선수로에서는 1일 평균 3.37cm/day의 삼투량을 얻었다. (3) 단 1회의 결과치를 객관성 있게 취급은 곤난하며 종래에 사용해 온 결과치보다는 손실과 삼투가 공히 상당히 큰 값을 보여주고 있어 좀 더 자세한 연구가 필요하다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2011년도 하계학술대회
• /
• pp.137-140
• /
• 2011

A precoding strategy is one of the representative interference management techniques in cognitive radio (CR) network which is a typical interference-limited environment. The interference minimization approach to precoding is an appropriate scheme to mitigate the interference efficiently while it may cause the capacity loss of the desired channel. The precoding scheme for the maximal capacity of the desired channel improves the capacity of the desired channel while it increases the interference power and finally causes the capacity loss of the interfered users. Therefore, we propose a precoding scheme which satisfies these two conflicting goals and manages the interference signal in such an interference-limited environment. The proposed scheme consists of two steps. First, the precoder nulls out the largest singular value of the interference channel to mitigate the dominant interference signal based on the interference minimization approach. Second, the transmitter calculates the sum capacities per mode and selects a mode to maximize the sum capacity. In the second step, each mode consists of the right singular vectors corresponding to the singular values except the largest singular value eliminated in the first step. Simulation results show that the proposed precoding scheme not only efficiently mitigate the interference signal, but also has the best performance in terms of the sum capacity in a MIMO-based CR network.

• 한국통신학회논문지
• /
• 제18권9호
• /
• pp.1404-1411
• /
• 1993

음성 통신과는 달리 데이타 신호전송은 불규칙하게 순간적으로 발생하는 선로장애에 크게 영향을 받는다. 이런 장애로 인해 때로는 송수신기 사이의 동기를 잃게되어, 강제적으로 재 동기시키지 않는한. 회복이 스스로 되지 못한다. 따라서 이러한 순간적인 장애에 의한 동기 손실에 적절히 대처하기 위해 데이타통신 장비에 효율적인 검출기가 필요된다. 본 논문에서는 부속데이타 채녈이 주데이타 채널에 같이 통합되어있는 데이타 송수신기에 적당한 검출기를 설계하였다. 검출용 신호를 원래의 부속채널 데이타와 함께섞어 기존 채널의 운영에 영향이 없게 부속채널을 통해 보낸다. 데이타 전송중에 계속해서 동작하도록, 변형된 up/down 카운터를 이용한 검출방식을 사용한다. 설계된 검출기의 성능이 수학적으로 분석되었다.

• 한국통신학회논문지
• /
• 제21권8호
• /
• pp.2063-2076
• /
• 1996

In this thesis, in order to apply a punctured convolutional codes to the trellis coded modulation(TCM), an efficient punctured trellis coded modulation(PTCM) based on the decomposition of the metric into orthogonal components is presented. Also, a simulation is performed in an additive white Gaussian noise(AWGN) and a rician fading channel modeling the mobile satellite channel. The PTCM combines punctured convolutional coding with MPSK modulation to provide a large coding gain in a power-limited or bandwidth-limited channel. However, in general the use of the punctured convolutional code structure in the decoder results in a performance loss in comparison to trellis codes, due to difficulties in assigning metrics. But, the study shows no loss in performance for punctured trellis coded MPSK in comparison to TCM, and what is more, the punctured convolutional codes results in some savings in the complexity of Viterbi decoders, compared to TCM of the same rate. Also, the results shows that the punctured trellis coded .pi./8 shift 8PSK is an attractive scheme for power-limited and band-limited systems and especially, the Viterbi decoder with first and Lth phase difference metrics improves BER performance by the mobile satellite channel.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.395-398
• /
• 1995

For the core loss measurement under arbitrary waveform of magnetic induction, we have constructed a single sheet core loss measuring system which consists of yoke apparatus for single sheet of $10\;cm{\times}10\;cm$, arvitrary waveform synthesizer, B-feedback system, and two channel transient recorder. Using the constructed measuring system, we can measure core loss including higher harmonics up to 2 kHz. Core loss of non-oreinted electrical steel was increased exponentially when higher harmonic frequency was increased or amplitude of harmonic induction was increased.

• 전자공학회논문지D
• /
• 제34D권10호
• /
• pp.53-59
• /
• 1997

In this paper, we present a 20 GHz low-loss dual-mode channel filter designed by using mode matching method. The performance of dual-mode channel filter mainly depends on iris characteristics. Therefore the exact design of iris is the key point to get good frequncy response of the filter. MOde matching technique is widely used ot design several kinds of waveguide filters because it is simple in theory and can easily calculate the scattering matrices at the discontinuities with simple structure like iris coupled filters. Additionally the effect for finite thickness of the iris in the dual-mode cavity iflter is analyzed by te full-wave method, providing the exact filter implementation without trial and error.

• 한국유체기계학회 논문집
• /
• 제18권3호
• /
• pp.66-73
• /
• 2015

This paper deals with a parametric study on boot-shaped ribs in a rectangular cooling channel. Numerical analysis of the flow and heat transfer was performed using three-dimensional Reynolds averaged Navier-Stokes equations with the Speziale, Sarkar and Gatski turbulence model. The parametric study was performed for the parameters, tip width-to rib width, tip height-to-rib height, rib height-to-channel height, and rib height-to-width ratios. To assess the cooling performance and friction loss, Numsselt number and friction factor were defined as the performance parameter, respectively. The results showed that the cooling performance and friction loss were seriously affected by the four geometric parameters.

• 전자공학회논문지A
• /
• 제30A권4호
• /
• pp.1-10
• /
• 1993

This paper presents the designing/manufacturing scheme of the diplexer for satellite transponder which is composed of 2-channel bandpass filters, coupled with E-plane T-junction, having symmetrical waveguide E-plane step discontinuity structures. The 2-channel bandpass filters of the diplexer are designed by the scheme of connecting ${\lambda}_{g}$/2 shunt stub to the waveguide E-plane, playing the role of heat sinks without attaching a special heat sinks and to give the profitable productivity and allow the low-cost manufacturing at mass production, tuning screws are eliminated which have been used to compensate the operating characteristics of manufactured filters. The 2 channel bandpass filters of manufactured 14/12 GHz diplexer for domestic Ku-band satellite transponder have the return loss of 25 dB, insertion loss of 0.3 dB in passband, and below-50 dB of stopband characteristics (T$_{x}$ : f$_{o}{\pm}$250 MHz, R$_{x}$ : f$_{o}{\pm}$220 MHz) at room temperature.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.557-562
• /
• 2017

In this paper, we show the design of a rotary joint transition for the X-band channel in a rotatable microwave communication system. The transition seems complicated to make a channel between two coaxial cables through a cylindrical waveguide. To make a broad-band performance in the X-band with low insertion loss and return loss given the constraint on the length and radius of this complicated-looking cylindrical structure, Genetic Algorithm optimization is adopted to check the validity of an intensive parametric study in the design. The structure is fabricated and tested to show how valid the design method is as well as good frequency responses.