• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(3)
• /
• pp.181-184
• /
• 2000

In this paper, we propose new features for describing texture images by using multi-channel Gabor filter and log-polar transform based on human visual system (HVS). Gabor features are extracted by the mean and standard deviation of energy in Gabor response, followed by Fourier series extension. Log-polar features are extracted by log-polar transform and projection. The proposed texture descriptor performs reasonably well with less number of features than other texture descriptors, which has been verified by experiments using some texture images of MPEG-7 data set.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.46-49
• /
• 2007

Multiple Antenna Technologies such as Multiple-Input Multiple-Output (MIMO) and Beamforming provide the increase of channel capacity and the reliability of wireless link. To obtain these advantages, WiBro, Mobile WiMAX and $4^{th}$ Generation System are employing multiple antenna technologies. There exist, however, many technical issues in considering the application of the technologies or the providing of services using them. In this paper, various technical topics are discussed and simple solutions are proposed. Beamforming has several technical issues which include coverage imbalance, difficulties in providing Multicast-Broadcast Service (MBS). In Addition, network planning is a critical point from a cell extension and initial network entry point of view. In case of MIMO, network deployment is discussed in that cellular data network such as WiBro has many repeaters. MIMO mode selection for maximizing the cell capacity is also covered.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1246-1252
• /
• 2002

Ultrafine grained (UFG) low carbon (0.15 wt.% C) steel produced by equal channel angula. pressing (ECAP) was tested for investigating the effect of load ratio on the fatigue crack growth rate. Fatigue crack growth resistance and threshold of UFG steel were lower than that of asreceived coarse grained steel. It was attributed to the less tortuous crack path. The UFG steel exhibited slightly higher crack growth rates and a lower △Kth with an increase of R ratio. The R ratio effect on crack growth rates and △Kth was basically indistinguishable at lower load ratio (R >0.3), compared to other alloys, which indicates that contribution of the crack closure vanishes. The crack growth rate curve for UFG steel exhibited a longer linear extension to the lower growth rate regime than that for the coarse grained as-received steel.

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.272-278
• /
• 2017

In this paper, we consider a single-channel amplitude comparison monopulse system(SCACMS). The monopulse ratio curve(MR-C) of the SCACMS can be controlled by an amplitude difference between sum and different signal, a phase difference and the coefficient of the signal processor. We first propose the SCACMS with multiple variables, and then apply a genetic algorithm to optimize the multiple variables in terms of minimizing a root mean square error. The simulation results show that when three variables of the SCACMS are jointly optimized, the linear region of the MR-C can be extended approximately 187 % compared to that of two variables.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.251-252
• /
• 2008

Throughput and quality-of-service (QoS) over multi-cell environments are two of the most challenging issues that must be addressed when developing next generation wireless network standards. Currently, multiple-input/multiple-output (MIMO), inter-cell coordination and multi-hop relay technologies are viable options for improving channel capacity or coverage extension. Nevertheless, severe QoS degradation occurs in the outer region of multi-cells due to significant interference from neighboring cells or relay stations, thereby limiting overall performance. Therefore, we propose a scheme which adapted to hybrid relaying.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.136-147
• /
• 2005

A theoretical design evaluation based on a hydrodynamic transport simulation of strained Si-SiGe on insulator (SSOI) type nMOSFETs is reported. Although, the net performance improvement is quite limited by the short channel effects, simulation results clearly show that the strained Si-SiGe type nMOSFETs are well-suited for gate lengths down to 20 nm. Simulation results show that the improvement in the transconductance with decreasing gate length is limited by the long-range Coulomb scattering. An influence of lateral and vertical diffusion of shallow dopants in the source/drain extension regions on the device performance (i.e., threshold voltage shift, subthreshold slope, current drivability and transconductance) is quantitatively assessed. An optimum layer thickness ($t_{si}$ of 5 and $t_{sg}$ of 10 nm) with shallow Junction depth (5-10 nm) and controlled lateral diffusion with steep doping gradient is needed to realize the sub-50 nm gate strained Si-SiGe type nMOSFETs.

• 한국정밀공학회지
• /
• 제12권2호
• /
• pp.135-144
• /
• 1995

조립작업에 있어서의 경로계획(path planning)에 대하여 지금까지 많은 연구가 진행되어 왔으며, 그것의 주종을 이루는 것들은 cell decomposition 방식과 potential field 방식이다. 이러한 방식들은 free space를 세분하거나 potential field를 계산하는데 많은 시간을 필요로 하며, 조립부품 이동영역이 configuration space로 먼저 치환이 되어야 하는 문제점들이 발생하게 된다. 그러므로, 만약에 조립부품에 대한 이동환경이 복잡하지 않고 알려져 있으면 위의 방식들은 비용적인 면에서 많은 낭비를 가져온다. 본 논문에서는 간단하면서도 알려진 작업환경에서 효과적인 조립부품의 경로계획 알고리즘을 개발하였다. 먼저, channel, junction 및 간격 유지계수(clearance gap)의 개념을 도입하고, 이 개념들을 이용하여 룰 방식의 알고리즘을 개발하였다. 그리고, 이 알고리즘을 이동용 로봇의 경로계획에도 적용될 수 있음을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.278-280
• /
• 2007

In this paper, wd design the Program Specific Information (PSI) parser and its On-Screen Display (OSD) on the middleware of ALi M3330 MPEG-2 decoder processor to analyze DVB-T Transport Stream(TS) information. To test the functional operation of the designed parser, we implement the DVB-T test board including the RF-tuner using ALi M3330 MPEP-2 decoder processor and confirm the correct operation using the input TS stream generated by DVB-T stream generator. The developed PSI parser could be used for the test environment, various channel extension, and the development of DVB-T reception module.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1999년도 가을 학술발표논문집 Vol.26 No.2 (3)
• /
• pp.414-416
• /
• 1999

무선 ATM은 무선 멀티미디어 서비스를 종단간 ATM 기술로 제공하는 전송방식으로 최근에 그 요구가 급증하여 단말기의 개발과 보급이 폭증하고 있다. 이에 따라 사용자 및 전송용량의 증가로 인하여 셀의 크기가 작아지게 되고 더 많은 핸드오프가 발생하게 되는데, 좀 더 빠르고 망 자원을 보다 효율적으로 이용하도록 하기 위한 기법들에 대한 연구가 증대되고 있다. 본 논문에서는 보다 빠른 핸드오프를 위하여 사용되어지는 여러 가지 routing 방법들 중 단말기가 접속된 기지국이 바뀔 경우 VC(Victual Connection)를 재설정하는 방식인 Path Extension과 Path Rerouting을 사용하여 LAN 환경에서 해당 MSC에 속한 BS의 개수에 따라 어떠한 VC path length와 receive latencies를 나타내는지 비교하여 핸드오프 지연이 보다 적은 기법을 제안한다.

• 한국IT서비스학회지
• /
• 제7권2호
• /
• pp.59-75
• /
• 2008

Despite our extensive understanding on the Internet business and widely understood first-mover advantage. it is not clearly answered yet whether an internet firm can enjoy the first-mover advantage in the new environment of the Internet. This is mainly because the Internet marketplace itself has a complex combination of various business models, ranging from a simple channel-extension to a whole new business model. Based on new theoretical development on the first-mover advantage, we empirically test whether being an early mover in the Internet environment materially affects firm performance, using clickstream data from Korea where broadband Internet installation is ranked as top among OECD countries. Our results show the effectiveness of first-mover advantage on the web does not exist, regardless of its business model and competitive environment. This result expands our understandings on the e-business, not to mention of the real feature of first-mover advantage.