• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1599-1610
• /
• 2019

Intelligent services have expanded as Internet of Things (IoT) technology has evolved and new requirements emerge to accommodate various services. One new requirement is transmitting data over long distances with low-power. Researchers have developed low power wide area (LPWA) network technology to satisfy the requirement; this can improve IoT network infrastructure and increase the range of services. However, network coverage expansion causes several problems. The traffic load is concentrated at a specific gateway, which causes network congestion and leads to decreased transmission efficiency. Therefore, the approach proposed in this paper attempts to recognize and then avoid congestion through gateway channel hopping. The LPWA network employs multiple channels, so wireless channel hopping is available in a gateway. Devices that are not delay sensitive wait for the gateway to reappear on their wireless channel; delay sensitive devices change the wireless channel along the hopping gateway. Thus, the traffic load and congestion in each wireless channel can be reduced improving transmission efficiency. The proposed approach's performance is evaluated by computer simulation and verified in terms of transmission efficiency.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 Asia Navigation Conference
• /
• pp.203-207
• /
• 2004

Yangtze River channel is in natural condition for a long time. There are more to be done in grade of navigation and transport. Since 1980's the rate of vessel in JiangSu channel is going up every year, especially for ocean vessels. Meanwhile, the serious factors such as no sailing at night have become a battlement causing the long period for vessels, high cost for shipowners, lower competitiveness for JiangSu ports along the Yangtze River. It also can not meet the port logistic development. After the Ships' Routeing in JiangSu has been carried out. It has improved the safety of navigation in JiangSu area and reduced the risk of pollution or other damage to the marine environment caused by ships colliding or anchoring in or near JiangSu channel. By analyzing, compareing, calculating and model forecasting. The main focus of the paper is put on the study the development of port, channel in JiangSu and efficiency in many fields. Navigation efficiency of the sailing at night; Safety efficiency of reducing the risk by ships; More efficiency of the higher cargo volumes of the other ports in Yangtze River with the increase cargo volume of JiangSu ports along Yangtze River. The purpose of this study is: To get the social and economical efficiency after the Ships' Routeing in JiangSu has been carried out. Also the role of the Ships' Routeing of JiangSu in the development of Port and Channel.

• Journal of information and communication convergence engineering
• /
• 제6권1호
• /
• pp.47-50
• /
• 2008

A novel high channel efficiency transceiver based on a fast acquisition frequency synthesizer has been designed. The direct digital synthesis (DDS) technique is applied and a simple memory look-up table is incorporated to expedite channel acquisition. The technique simplifies the frequency control process in the transceiver and thus reduces the channel switching time. As a result, the channel efficiency is improved. The designed transceiver is ideal for frequency hopping mobile communication applications.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1593-1599
• /
• 2017

This paper presents a multi-channel light-emitting diode (LED) driver IC with a current-mode current regulator. The proposed current regulator replaces resistors for current sensing with a sequentially controlled single current sensor and a single regulation loop for sensing and regulating all LED channel currents. This minimizes the current mismatch among the LED channels and increases voltage headroom or, equivalently, power efficiency. The proposed LED driver IC was fabricated in a $0.35-{\mu}m$ BCD 60-V high voltage process, and the chip area is $1.06mm^2$. The measured maximum power efficiency is 93.4 % from a 12-V input, and the inter-channel current error is smaller than as low as ${\pm}1.3%$ in overall operating region.

• 반도체디스플레이기술학회지
• /
• 제8권2호
• /
• pp.43-47
• /
• 2009

Glass forming technology is used to form channels of external electrode flat fluorescent lamps (FFL). The efficiency of FFL depends on the number and the length of the channels. Five FFLs with same size ($300\;mm{\times}80\;mm$), different channel number, and different channel length were fabricated. The electrical and optical characteristics of 5 FFLs were evaluated. It was found that the FFL with one channel with its channel length of 1,110 mm and channel width of 7 mm corner width was shown to have the highest efficiency at room temperature operation.

• 한국음향학회지
• /
• 제33권6호
• /
• pp.413-419
• /
• 2014

수중음향 채널은 시변적인 특징을 가진다. 채널의 시변동성은 지속적인 정보 데이터 전송을 방해하여 수중음향통신의 신뢰도를 감소시키는 요인이 된다. 본 논문에서는 채널의 시변동성을 시간영역 상관도로 기술하고, 정보 데이터의 실질 전송시간을 스루풋 효율로 표현하였다. 그리고 수중음향 채널의 시변동성이 통신 스루풋 효율에 미치는 영향을 분석하였다. 실제 수중음향통신 실험을 통하여 수중채널의 시변동성이 클수록 통신의 스루풋 효율도 감소한다는 것을 확인하였다.

• 한국통신학회논문지
• /
• 제33권5A호
• /
• pp.549-560
• /
• 2008

본 논문은 무선 네트워크 환경에서 채널 효율성을 높이기 위하여 두 개의 인터페이스를 사용하는 새로운 멀티채널 MAC 프로토콜을 제안하였다. 멀티채널 환경에서 기존에 제안된 대부분의 연구들은 컨트롤 메시지를 교환하기 위하여 공통 컨트롤 채널을 사용하였는데, 이것은 데이터 채널이 증가할 때 공통 컨트롤 채널에서 병목 현상을 야기 시킨다. 본 논문에서는 제안하는 멀티채널 MAC 프로토콜은 송수신용 채널을 분리하여 데이터와 컨트롤 패킷을 동시에 송수신하여 전체 네트워크 처리량을 높이고, 공통 컨트롤 채널이 없기 때문에 병목현상 문제가 발생하지 않는다. 또한 TDMA 방식을 사용하여 데이터 패킷과 컨트롤 패킷의 충돌을 피할 수 있고, 멀티채널환경에서 송수신 인터페이스가 다를 경우 발생하는 CTS 패킷이나 ACK 패킷의 충돌 가능성을 줄였다. 모의실험결과는 제안된 멀티채널 MAC 프로토콜이 기존의 방법과 비교해서 전체 네트워크 처리량과 채널 효율성을 크게 향상시키는 것을 보여준다.

• 농업생명과학연구
• /
• 제44권1호
• /
• pp.69-80
• /
• 2010

본 연구는 착색단고추의 유통실태를 분석하고 운영효율성을 측정하여 유통경로별 유통효율성을 비교분석한 것이다. 수출시장 (일본)의 경우에는 개별농가가 직접수출대행업체와의 계약을 통해 수출하는 것 (유형 III)이 영농조합법인 (유형 I:수출농단결성)과 지역농협을 통한 공동출하 (유형 II)의 경우보다 운영효율성이 높은것으로 분석되었다. 내수시장의 경로에서는 도매시장을 통한 경로가 가장 효율적인 것으로 분석되었는데 이는 도매시장을 통해 유통되는 물량은 대형유통업체와 계통판매되는 물량보다 비표준화된 물량이 많으므로 품질면에서 차이가 나지만 내수시장균형가격이 비교적 높게 형성됨으로써 품질에 상응하는 가격이 형성되지 않고 있는 실정이다. 그리고 유형IV의 경우는 유형 V, VI유형보다 유통비용 투입에 대한 산출수준이 비교적 유리한 것으로 나타났다.

• 한국멀티미디어학회논문지
• /
• 제10권12호
• /
• pp.1632-1644
• /
• 2007

Wireless Mesh Networks aim to attain large connectivity with minimum performance degradation, as network size is increase. As such, scalability is one of the main characteristics of Wireless Mesh Networks that differentiates it from other wireless networks. This characteristic creates the need for bandwidth efficiency strategies to ensure that network performance does not degrade as the size of the network increase. Several researches have been done to realize mesh networks. However, the researches conducted were mostly focused on a per TCP/IP layer basis. Also, the studies on bandwidth efficiency and bandwidth improvement are usually dealt with as separate issues. This paper aims to simultaneously study bandwidth efficiency and improvement. Aside from optimizing the bandwidth given a fixed capacity, the capacity is also increased using results of physical layer studies. In this paper, the capacity is improved by using the concept of non-overlapping channels for wireless communication. A channel allocation scheme is conceptualized to choose the transmission channel that would optimize the network performance parameters with consideration of chosen Quality of Service (QoS) parameters. Network utility maximization is used to optimize the bandwidth after channel selection. Furthermore, a routing scheme is proposed using the results of the network utilization method and the channel allocation scheme to find the optimal path that would maximize the network gain.

• 한국인터넷방송통신학회논문지
• /
• 제10권4호
• /
• pp.145-150
• /
• 2010

본 논문에서는 스펙트럼 효율 향상을 위한 부가 데이터 전송 시스템을 제안하고 채널용량 식을 근사화 하여 유도 한다. 대역확산 워터마킹 기법이 워터마킹 신호 삽입기로 이용되었고 다중경로 채널로는 나카가미-q (Hoyt) 모델을 고려하였다. 수식적 결과는 무선 페이딩 채널에서 제안된 시스템의 채널 용량 변화를 보여준다. 결과로부터 워터마킹 시스템의 채널용량이 페이딩 계수와 호스트 샘플링 주파수, 호스트-워터마킹 전력비, 워터마킹-잡음 전력비 및 확산코드 길이에 의해서 영향 받음을 확인한다.