• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.800-803
• /
• 2006

The Space-borne electro-optical camera system, like KOMPSAT has panchromatic redundant image channel as well as primary channel in order to increase reliability of satellite system. In most case redundant channel never been used during the whole mission period. Staggered array configuration using redundant image channel and new operation mode proposed which operates primary and redundant channel simultaneously. Without new hardware design, fast electronics and system complexity, we can get 1.414 times more fine GSD image of original system and aliasing effect which corrupt high frequency information of image can be minimized. To get the more efficiency from staggered array configuration, we introduce masked pixel CCD.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.178.1-178
• /
• 2003

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.163-166
• /
• 2004

모바일향 90nm DRAM을 개발하기 위하여 비대칭 채널 구조를 갖는 Recess Channel Array Transistor (RCAT)로 cell transistor를 구현하였다. DRAM cell transistor에서 junction leakage current 증가는 DRAM retention time 열화에 심각한 영향을 미치는 요인으로 알려져 있으며, DRAM의 minimum feature size가 점점 감소함에 따라 short channel effect의 영향으로 junction leakage current는 더욱 더 증가하게 된다. 본 실험에서는 short channel effect의 영향에 의한 junction leakage current를 감소시키기 위하여 Recess Channel Array Transistor를 도입하였고, cell transistor의 채널 영역을 비대칭으로 형성하여 data retention time을 증가시켰다. 비대칭 채널 구조을 이용하여 Recess Channel Array Transistor를 구현한 결과, sub-threshold 특성과 문턱전압, Body effect, 그리고, GIDL 특성에는 큰 유의차가 보이지 않았고, I-V특성인 드레인 포화전류(IDS)는 대칭 채널 구조인 transistor 대비 24.8% 정도 증가하였다. 그리고, data retention time은 2배 정도 증가하였다. 본 실험에서 얻은 결과는 향후 저전압 DRAM 개발과 응용에 상당한 기여를 할 것으로 기대된다.

• 한국ITS학회 논문지
• /
• 제12권4호
• /
• pp.66-75
• /
• 2013

나노미터 크기의 Spintronics 발진기 어레이를 기반으로 Spintronics 발진기의 주파수 및 진폭을 동시에 변조하는 새로운 스핀변조를 실현할 수 있다. 본 논문에서는 실현된 스핀 변조신호를 무선으로 수신하기 위해 듀얼 채널를 처리하는 수신기를 설계하였다. 최종적으로 얻어진 Spintronics 발진기 어레이에서 만들어진 스핀변조 신호를 수신기의 두 채널을 통해서 동시에 처리 할 수 있었으며, 각 채널당 최종적으로 200 kbps급 까지의 데이타 전송을 실현하였다. Spintronics 발진기의 신호 레벨 -60 dBm 크기의 한계로 1 cm 이하의 근접거리 통신에서 가능하며, 듀얼 채널 수신기는 $56{\times}33mm^2$ 크기이다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.519-522
• /
• 2002

An active phased array antenna consists of many channels. Each channel has a different initial phase shift and gain because of the inequality in the active circuits themselves, interface between radiators and active circuits, and beam-forming circuits and other antenna system configurations. This raises an inherent problem in active phased array antennas. To compensate for this problem the initial phase and gain of each channel should be calibrated. This paper presents an efficient calibration method for an initial phase variation of each channel in active phased array antennas. We tested our method in an active phased array antenna, and obtained good results in the radiation pattern and beam direction of antenna.

• 대한기계학회논문집B
• /
• 제35권11호
• /
• pp.1119-1126
• /
• 2011

기존 마이크로채널 열교환기는 한 플레이트에 고온 또는 저온, 한 종류의 유체만이 흐르고 있다. 채널 내부를 흐르는 유체의 수직 방향으로는 다른 종류의 유체가 존재하지만, 수평 방향으로는 같은 종류의 유체가 존재한다. 그로 인해 수평 방향의 열전달률은 수직 방향에 비하여 낮게 나타나게 된다. 열교환기 성능 향상을 위하여 한 플레이트에서 고온, 저온 유동이 번갈아가며 존재하는 새로운 채널 배열을 제안하였다. 새로운 채널 배열을 위해서는 특별한 입구 및 출구 설계가 필요하다. 제안된 채널 배열을 통하여 기존 열교환기보다 높은 열전달률을 얻을 수 있다. Reynolds 수와 Prandtl수가 증가할수록 새로운 채널 배열로 인한 열 성능 향상이 증가하고, 고체와 유체의 열전도계수 비가 증가할수록 열 성능 향상은 감소한다.

• 전기학회논문지
• /
• 제64권12호
• /
• pp.1737-1741
• /
• 2015

A multi-channel CMOS transimpedance amplifier(TIA) array is realized in a $0.18-{\mu}m$ CMOS technology for the applications of panoramic scan LADAR systems. Each channel consists of a PIN photodiode and a feed-forward TIA that exploits an inverter input stage followed by a feed-forward common-source amplifier so as to achieve lower noise and higher gain than a conventional voltage-mode inverter TIA. Measured results demonstrate that each channel achieves $76-dB{\Omega}$ transimpedance gain, 720-MHz bandwidth, and -20.5-dBm sensitivity for $10^{-9}$ BER. Also, a single channel dissipates the power dissipation of 30 mW from a single 1.8-V supply, and shows less than -33-dB crosstalk between adjacent channels.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.735-741
• /
• 2003

A simplified view of array design and application process was introduced. Array design is critical to achieve a successful phased array measurements. A planar microphone array is designed to produce optimum performance and also to fit economic requirement in integrating data acquisition system. Certain performance characteristics are of primary concern when designing arrays. These characteristics include array resolution, spatial aliasing and array sidelobe suppression. Every array has its directional pattern that shows such characteristics. Assuming that a monopole source is located in center, beam-patterns have been simulated varying measurement conditions such as number of sensors. array aperture size, distance between array and source, frequency of interest and so on. Sensor correction was conducted on very channel using magnitudes and phased of FRF with respect to a reference microphone channel. Then with a spiral type array, measurements have been made with two point sources of same frequency in order to investigate array resolving abilities. It is observed that higher frequency source achieves better resolution than lower one does.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권10호
• /
• pp.4759-4780
• /
• 2017

Full Dimension multiple input multiple output (FD-MIMO) architecture employs a planar array design at the Base Station (BS) to provide high order multi-user MIMO (MU-MIMO) via simultaneous data transmission to large number of users. With FD-MIMO, the BS can also adjust the beam direction in both elevation and azimuth direction to concentrate the energy on the user of interests while minimizing the interference leakage to co-scheduled users in the same cell or users in the neighboring cells. In a typical highly populated macrocell environment, modelling the elevation angular characteristics of three-dimensional (3D) channel is critical to understanding the performance limits of the FD-MIMO system. In this paper, we study the throughput performance of FD-MIMO system with varying elevation angular spread and inter-element spacing using a 3D spatial channel model. Our results show that for a typical urban scenario, horizontal beamforming with correlated antenna spacing achieves optimal performance but by restricting the spread of elevation angles of departure, elevation beamforming achieves high array gain with wide inter-element spacing. We also realize significant gains due to spatial array processing via modelling the elevation domain and varying the inter-element spacing for both the transmitter and receiver.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권9호
• /
• pp.423-430
• /
• 2002

The fabrication and experimentation of multi-channel electrodes which enable detecting and recording of multi-site neuronal signals have been investigated. A multi-channel electrode array was fabricated by depositing 2000${\AA}$ thick Au layer on the 1000${\AA}$ thick Ti adhesion layer on a glass wafer. The metal paths were patterned by wet etching and passivated by depositing a PECVD silicon nitride insulation layer to prevent signals from intermixing or cross-talking. After placing a thin slice of rat cerebellar granule cell in the culture ring located in central portion of the multi-channel electrode plate, a neuronal signal from an electrode which is in contact with the cerebellar granule cell has been detected. It was found that the electrode impedance ranges 200㏀∼1㏁ and the impedance is not changed by cleaning with nitric acid. Also, the impedance is inversely proportion to the exposed electrode area and the cross-talk is negligible when the electrode spacing is bigger than 600$\mu\textrm{m}$. The amplitude and frequency of the measured action potential were 38㎷ and 2㎑, which are typical values. From the experimental results, the fabricated multi-channel electrode array proved to be suitable for multi-site neuronal signal detection for the analysis of a complicated cell network.