• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.9-14
• /
• 1973

In order to find out effects of the generative power of silk worm moth which have been brought up in the high temperature accommodation at their pupa stage. For this specific study, 9 different kinds of male silk worms have been selected as specimen. All those specimen were brought up in the normal temperature at their larvae stage and after the pupation period they have been accommodated in the condition of high temperature for a certain length in accordance with the study programme. Afterwards, those mlae specimen were copulated with Suwon jam 103${\times}$104 which were all brought up in normal conditions. This study was carried out to find the copulation function as well as the ratio of unfertilized eggs(male sterility test). Results of study have been revealed as follows: 1) Although some differences were observed, male pura which have been brought up in the condition of high temperature shown the low rate of unfertilized eggs rather than those were brought up in the normal conpition. 2) In this group the eclosion(emergency) has been found to be poor rather, than those specimen brought up in normal conditions. 3) The copulation function of Moran, Daedong, J124 and C108 specimen were found to be poor than those of Suwon jam. 4) Fertility rate of Moran, Daedong, J124 and C108 was found to be around 65%. This figure is rather lower than what we normally expect. 5) Unfertilized egg ratio of Moran, Daedong and C108 were found to be around 20% if they were brought up in the condition of high temperature for one day from the time of pupation: 40% at 2 days, and 70% at 3 days duration. More than 3 days treatment has shown no progress in the unfertilized egg ratio. 6) One day's treatment for the pupa at the later stage has shown the unfertilized egg ratio of about 10%; 20% at 2 day's treatment, 35% at 3 day's treatment, 40-60% at 4 day's treatment, more than 60% at 5 day's treatment, and the 70% of fertilized egg ratio was only observed when the treatment days come to 7 days. It was understood that the unfertilized egg ratio was high at the antepupa stage rather than that of post-pupa stage. 7) According to the result of observation the sperm in copulatory pouch and seminal receptacle out of the normal female silk worm which have been copulated with the male brought up in the condition of high temperature at their moth stage. The reproduction system found in the control zone has been found to be normal and the sperm is amountful and active in motion while the sperm found in the treatment to be limited in amount and slow in motion. The observation was made within 5 hours from the copulation. 8) According to the result of observation of sperm of seminal receptacles of the female silkworm moth, and according to that observation of sperm in the seminal receptacle in female silkworm moth, the amount of sperm and mobility in the female moth brought up in high temperature were poor comparing that were brought up in normal temperature zone. Some of them are even found to be no trace of such. 9) Appearance and mosle of the copulatory organ of the male silkworm moth was found to be no anatomical change. 10) Testis of the later pupa stage which was brought up in the high temperature was found to be almost net developed to anucleate sperm and they are degenerated at stage of between maturation division and sperm abnormal stage. Mean time at control zone, the formation of anucleate sperm was already observed.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.3
• /
• pp.99-116
• /
• 1997

In response of the increasing demand for professional degree in nursing, some university in Korea offers RN-BSN program for R. N. from diploma in nursing. However, RN-BSN program in Korea is in formative period. Therefore, the purpose of this survey study is for the comparative analysis of RN-BSN curriculum in Korea and U.S.A. In this study, subjects consisted of 18 department of nursing in university and 5 RN-BSN programs in Korea and 18 department of nursing in university and 12 RN-BSN programs in U.S.A. For earn the degree of Bachelor of Science in Nursing, the student earns 134 of mean credits in U.S.A., whereas 150.3 of mean credits in Korea. The mean credit for clinical pratice is 30.1 in U.S.A., whereas 23.9 in Korea. Students are assigned to individually planned clinical experiences under the direction of a preceptor in U.S.A. In RN-BSN program, total mean credits through lecture and clinical practice for earn the degree of BSN is 35.5(lecture : 27.7, practice ; 7.8)in U.S.A., whereas,48.1 (lecture;42.1, practice;6.0) in Korea. RN-BSN program can be taken on a full-or-part time basis in U.S.A., whereas didn't in Korea. Especially, emphasis is place on the advanced nursing practicum that focus on the role of the professional nurse in providing health care to individuals, families, and groups in community setting in U.S.A. 27.7 of mean credits was earned through lecture in U.S.A., whereas 42.1 of mean credits in Korea. It means that RN-BSN program in Korea is the lesser development in teaching method and appraisal method than in U.S.A. Students of RN-BSN program in U.S.A. can earns credit through CLEP, NLN achievement test, portfolio review session etc as well as lecture. Therefore, the authors suggests some recommendations for the development of curriculum of RN-BSN program in Korea based on comparative analysis of RN-BSN curricula in U.S.A. and Korea. 1. The curriculum of RN-BSN Program in nursing was required to do some alterations. Nursing care, today, is complex and ever changing. According to change of public need, RN-BSN curriculum intensified primary care program in community setting, geriatric nursing, marketing skill, computer language. 2. The various and new methods of earning credit should be developed. That is, the students will earn credits through the transfer of previous nursing college credits, accredited examination of university, advanced placement examination, portfolio review session, case study, report, self-directed learning and so on. Flexible teaching place should ile offered. 3. Flexible teaching place should be offered. The RN-BSN curriculum should accommodate each RN student's geographical needs and school/work schedule. Therefore, the university should search a variety of teaching places and the RN students can obtain their degrees comfortably throughout the teaching place such as lecture room inside the health care agency and establishment of the branch school in each student's residence area. 4. The RN-BSN program should offer a long distance education to place-bound RN student in many parts of Korea. That is, from the main office of university, the RN-BSN courses are delivered to many areas by Internet, EdNet (satellite telecommunication) and other non-traditional methods. 5. For allowing RN student to take nursing courses, program length should be various, depending upon the student's study/work schedule. That is, the various term systems such as semester, three terms, quarter systems and the student's status like full time or part time should be considered. Therefore, the student can take advantage of the many other educational and professional opportunities, making them available during the school year.

• Journal of the Korean Geographical Society
• /
• v.30 no.3
• /
• pp.242-254
• /
• 1995

The Hadano Basin is located at a distance of about 70kms and 60kms from Tokyo and Yokohama and lies in the south-west part of the Kanto region in Japan. The basin area, which correspoends to the catchment of the Kaname River, is about areal size of 60.7$\textrm{km}^2$ and extends about length of 8kms in E-W direction and about width of 5kms in N-S direction (Fig.1). The Hadano basin is filled with thick pile of the alluvum from deposits composed of volcanic materials, mostly came from the Hakone Volcano and overlain by Fuji Volcanic ashes. Fluvial deposits form the good aquifer, therefore water resources of Handano City has been largely depending upon the eroundwater. Urbanization and industrialization of the basin has been rapid in the last thirty years, after activation of "Factory Attraction Policy of Hadano City" in 1956. Growth in population and number of factory due to urbanization changed the land-use pattern of the basin rapidly and increased the water demands. Therefore, Hadano City exploited a new source of water supply, and have introduced the prefectureal waterworks since 1976. On the other hand, the rapid urbanization has brought about the pollution of streams in the basin by domestic sewage and industrial waste water. Diffusion rate of sewerage systems in Hadano City is 38% in 1993. In ordcr to examine the impact of anthropogenic factors on river environments, the author took up the change of land-use and diffusion area of sewerage as parameters, and performed field surveys on water discharge and quality. The survey has been made at upstream and downstream of the main stream regularly per month, to get informati ons about the variation of discharge and water quality aiong the stream and its diurnal fluctuation. Annual variation has been analyzed based the data from Hadano City Office. The results are summarized as follows. 1. Stream discharge has been increasing by urbanization (Fig.3). Water quality (C $l^{-10}$ , N $H^{+}$$_{ 4}$-N, BOD) has been improving gradually after the application of sewerage service, yet water pollution load at the lower station has increased than that at the upper one because of the larger anthropogenic discharge volumes (Fig.4). 2. Corrclation coefficient of discharges between upper and lower was 0.81-0.92. Pollutant loads of the R. Kamame after the confluence with R. Kuzuha grew up by 2.4-3.7 times as compared with its upper reaches, and it increased to 3.7-6.9 times after the confluence with the R. Muro (Fig.5). 3. The changes of water quality along the stream can be divided into two groups (Fig.6a). First: water quality of the R. Kaname and R. Shijuhachisse is becoming worse towards the lower reaches because the water from branches are polluted. Second: water quality are improved in the lower where spring and small branch streams supply clear water, for example R. Mizunashi, R. Muro and R. Kuzuha. 4. Measured discharge at the upper station in the R. Shijuhachisse is 0.153㎥/sec, and about 55% of this is recharged until it reaches to the lower point. The R. Mizunashi has a discharge of 1.155㎥/sec at the upper point, is recharged 0.24㎥/sec until the midstream and groundwater spring 0.2㎥/sec at the lower reaches. R. Kuzuha recharged all the mountain runoff (0.2㎥/sec) at the upper reaches. The R. Muro is supplied by many springs and the estimated discharge of spring was 0.47㎥/sec (Fig.6b). 5. Diurmal variations in discharge and water quality are influenced clearly by domestic and industrial waste waters (Fig.7, 8).ed clearly by domestic and industrial waste waters (Fig.7, 8).

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.1
• /
• pp.13-19
• /
• 2011

Purpose: It's essential to minimize the tumor motion and identify the exact location of the lesions to achieve the improvement in radiation therapy efficiency during SBRT. In this study, we made the established compression belt to reduce respiratory motion and evaluated the usefulness of clinical application in SBRT. Materials and Methods: We analyzed the merits and demerits of the established compression belt to reduce the respiratory motion and improved the reproducibility and precision in use. To evaluate the usefulness of improved compression belt for respiratory motion reduction in SBRT, firstly, we reviewed the spiral CT images acquired in inspiration and expiration states of 8 lung cancer cases, respectively, and analyzed the three dimensional tumor motion related to respiration. To evaluate isodose distribution, secondly, we also made the special phantom using EBT2 film (Gafchronic, ISP, USA) and we prepared the robot (Cartesian Robot-2 Axis, FARARCM4H, Samsung Mechatronics, Korea) to reproduce three dimensional tumor motion. And analysis was made for isodose curves and two dimensional isodose profiles with reproducibility of respiratory motion on the basis of CT images. Results: A respiratory motion reduction compression belt (Velcro type) that has convenient use and good reproducibility was developed. The moving differences of three dimensional tumor motion of lung cancer cases analyzed by CT images were mean 3.2 mm, 4.3 mm and 13 mm each in LR, AP and CC directions. The result of characteristic change in dose distribution using the phantom and rectangular coordinates robot showed that the distortion of isodose has great differences, mean length was 4.2 mm; the differences were 8.0% and 16.8% each for cranio-caudal and 8.1% and 10.9% each for left-right directions in underdose below the prescribed dose. Conclusion: In this study, we could develop the convenient and efficient compression belt that can make the organs' motion minimize. With this compression belt, we confirmed that underdose due to respiration can be coped with when CTV-PTV margins of mean 6 mm would be used. And we conclude that the respiratory motion reduction compression belt we developed can be used for clinical effective aids along with the gating system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.172-183
• /
• 2017

Germinated brown rice (GBR) has received considerable attention over the last decade as a means of enhancing the nutritional value and health-promoting functions of rice. The effect of germination on the physicochemical and textural properties of brown rice (BR) was investigated in different rice varieties (Samkwang, Misomi, Chindeul, and Hyeonpum). Cooking properties, such as water absorption, expanded volume, and soluble solids were significantly increased by germination in all rice varieties. Textural properties (hardness, toughness, adhesiveness, and stickiness) of cooked samples were determined using a texture analyzer. Hardness and toughness were decreased by germination, whereas stickiness and adhesiveness increased significantly. These results revealed that germination leads to improvements in the cooking and eating properties of BR. In Rapid Visco Analyzer (RVA), significant reductions were observed for peak viscosity, break down, set back, and final viscosity after germination. Although the amylose content of Misomi was slightly decreased by germination, that of other varieties increased significantly. Germination induced no noticeable change in the average chain length of amylopectin in Misomi, Chindeul and Hyeonpum, but led to a significant increase in Samkwang.

• Journal of Mushroom
• /
• v.8 no.3
• /
• pp.109-115
• /
• 2010

We investigated the morphological traits, hardness and color of fruting bodies on eight strains according to changes of the humidities in mushroom house in Flammulina velutipes. The morphological traits like length and thickness of stipe, diameter and thickness of pilei didn't show any relations to humidity. Variation of these traits were rather showed by strains. ASI 4065 and ASI 4031 produced the longest stipes and ASI 4103 did the shortest ones. Fruiting body of ASI 4103 showed the most thickness of stipe, diameter and thickness of pilei. The pilei of ASI 4065, ASI 4021 and the stipe of ASI 4153 was the thinest. Brightness (L) values of white strains were increased at the low humidity except ASI 4021. But chroma (a, b) value showed little variation according to the humidity. L value of brown strains usually increased at the low humidity and a chroma (a, b) value showed little variation according to the humidity. But the chroma (a) value of pilei increased and the chroma (b) value of pilei decreased at the hight humidity. Most strains were brighter at pilei than at stipes. Hardness were not any relations to the humidity. In general, hardness of stipes were higher than that of pilei and their degrees were different according to strains. Hardness of ASI 4021 was the highest and ASI 4166 was the lowest. White strains were higher than brown strains at the hardness. As a result, hardness was rather affected by strains than by humidity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.63-69
• /
• 2015

This study was conducted to measure the effect of PE film mulching and irrigation methods on the growth, yield and antioxidant activity of potatoes tubers, in order to examine the possibility of cultivating potatoes in winter season in vinyl greenhouse on the reclaimed tidal land with weak ground inside the sea wall currently completed. The test was conducted on the sandy loam soil (Munpo series), and its salt concentration was 0.42% at the time of planting. The emergence speed per kind of PE film mulching was in the order of black > coloration > transparent > green color, with the black color showing the fastest speed. The temperature change during a day per kind of PE film mulching was in the order of transparent > coloration > green > black color. As for the salt concentration in the soil for each different way of water management, the salt concentration in the treatment of drip irrigation with 1 week interval was lower than that drip irrigation with 2 weeks interval. As for the growth of above-aerial part, plant length was higher, number of tiller and leaves were more and dry weight of above-aerial part was larger in the treatment of drip irrigaton with 1 week interval than drip irrigation with 2 weeks interval. As for the yield of potatoes depending on each way of water management, the yield in the treatment of drip irrigation with 1 week interval was more than drip irrigation with 2 weeks interval. The yield for each different kind of PE film mulching in the weekly drip-irrigation management section was in the order of transparent ${\geq}$ black ${\geq}$ coloration ${\geq}$ green color. In both of total phenol content and DPPH free radical activity experiments, the content and activity were higher with pear color vinyl treatment.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.733-741
• /
• 1997

As a result of surgical orthodontic treatment of mandibular prognathism, changes take place in the skeletal and soft orofacial components. Although some investigators had stated that permanent reduction of airway space was observed after mandibular setback surgery, it was not clear that this permanent reduction was sustained during long-term follow-up. The purpose of this study was to assess the changes in oropharyngeal airway space and soft tissue orofacial component following the mandibular setback surgery and during the follow-up period. The correlation between the changes of the oropharyngeal airway space and the changes of other soft tissue orofacial component was also assessed. The findings of this study were as follows ; 1. The oropharyngeal airway space area decreased following mandibular setback surgery for mandibular prognathism and continued to decrease during the follow-up period(p<0.05). 2. The pharyngeal depth at Xi point level and the 2nd cervical vertebra point level decreased after the surgery and remained during the follow-up period(p<0.05). The decrease of these pharyngeal depth was correlated with the decrease of oropharyngeal airway space area(p<0.01). 3. The decrease of pharyngeal depth at the 3rd and 4th cervical vertebra point level was not significant after the surgery and during the follow up period. 4. The hyoid bone moved downward after the surgery(p<0.05), but returned to its original position during the follow-up period. 5. The length & height of tongue and the Position of epiglottis base did not change significantly(p>0.05). 6. The soft palate was displaced posteriorly after the surgery and remained to its changed position during the follow-up period(p<0.05) due to posterior displacement of tongue. The changes of soft palate were significantly correlated with the decrease of oropharyngeal airway space area(p<0.01). 7. The narrowing of oropharyngeal airway space was due to the posterior displacement of tongue above the level of epiglottis tip. The posterior displacement of tongue following mandibular setback osteotomy remained during the follow-up period.

• The korean journal of orthodontics
• /
• v.36 no.2 s.115
• /
• pp.145-152
• /
• 2006

The purpose of this study was to evaluate electroless plating as a method of increasing the diameter of an orthodontic wire in comparison with eletroplating. After pretreatment plating of the 0.016 inch stainless steel orthodontic wire, electroless plating was performed at $90^{\circ}C$ until the diameter of the wire was increased to 0.018 inch. During the process of electroless plating, the diameter of the wire was measured every 5 minutes to examine the increasing ratio of the wire's diameter per time unit. And to examine the uniformity, the diameter at 3 points on the electroless-plated orthodontic wire was measured. An X-ray diffraction test for analyzing the nature of the plated metal and a 3-point bending test for analyzing the physical property were performed. The electroless-plated wire group showed a increased tendency for stiffness, yield strength, and ultimate strength than the electroplated wire group. And there was a statistically significant difference between the two groups for stiffness and ultimate strength. In the electroless-plated wire group, the increasing ratio of the diameter was $0.00461{\pm}0.00003mm/5min$ (0.00092 mm/min). In the electroplated wire group, it was $0.00821{\pm}0.00015mm/min$. The results of the uniformity test showed a tendency for uniformity in both the plating methods. The results of this study suggest that electroless plating of the wire is closer to the ready-made wire than electroplating wire in terms of the physical property. However, the length of plating time needs further consideration for the clinical application of electroless plating.

• Journal of the Korean Burn Society
• /
• v.24 no.2
• /
• pp.21-29
• /
• 2021

Purpose: Frostbite is a hazard to people exposed to cold environments. With the progression of modern industrial development and change of leisure behavior encountering cold environments, frequent accidental exposure to frostbite injury during work and human behavior is increasing, and the predisposing factors of frostbite were greatly changed than before. The purpose of this study was to make epidemiological analysis, and to review the treatment outcomes of frostbite. Methods: From March 2010 to February 2021, this study has included 27 patients with second- to third-degree frostbite injuries in Advanced Burn Reconstruction Center, Bundang Jesaeng Hosptial. A retrospective study was made about the distribution of age, gender, predisposing factors, prevalent area, type of managements, and the length of treatment period. Results: In our institution, acute management of frostbite patients has included rewarming, anticoagulation therapy (acetylsalicylic acid), and agents to improve vascular perfusion (lipo-prostaglandin E1 [Eglandin^®]). The 25 frostbite patients with second-degree frostbite (92.6%) were successfully managed by the conservative treatment alone with a mean of 20.3 days healing time. Two patients with third-degree frostbite (7.4%) also showed good outcomes after surgical reconstruction with a mean of 59 days healing time. In our clinical experiences of third-degree frostbite, definitive surgical reconstruction should be recommended to wait for more than 4~6 weeks for identification of clear demarcation of necrotic tissue caused by frostbite. In this study, 43 frostbite injuries site in 27 frostbite patients occurred. Among them, 15 patients (55.6%) had multiple-site frostbite injury. The most common predisposing cause of frostbite was refrigerant gas accidents (44.4%), followed by outdoor activity in cold environments (40.8%), misapplying ice pack for treatment purposes (7.4%), barefoot walking on the cold ground (3.7%), and loss of consciousness in cold grounds (3.7%). The most prevalent sites of frostbite injuries revealed as the hand (58.1%), followed by the foot (32.6%), face (7.0%), and abdomen (2.3%). And in the winter season from the November to March, the incidence rate of frostbite injuries was high at 74.1%. Conclusion: This study included 27 frostbite patients with 43 frostbite sites since last decade in a single institution at the community hospital. The frostbite patients with second-degree frostbite (92.6%) were successfully healed by the conservative treatment alone with a mean of 20.3 days healing time. The most common predisposing cause of frostbite was refrigerant gas accidents (44.4%), followed by outdoor activity in cold environments, etc. The most prevalent site of frostbite injuries was the hand (58.1%). And the most prevalent seasonal incidence of frostbite was from November to March (74.1%).