• 한국IT서비스학회지
• /
• 제10권1호
• /
• pp.65-72
• /
• 2011

In this paper, we consist of three dimensional acceleration sensor as a small-sized sensor module to acquire base technologies that need to estimate exhibition audience' moving distance. and that we developed algorism and device that can calculate acceleration in gravity direction with attaching it to people's body part without regard to three dimensional direction. By making use of the sensor module, we have to process the data that let it quantitatively process possible to measure people's walk and movement by computer system. We normalized sensor output data in the process of change from sensor module to acquisition of data, rectangular coordinates and single scalar acceleration value in gravity direction. Printed out sensor data attaching sensor module to people's body part is used for motion pattern detection after normalization, Motion sensor devised mode change algorism because it print data of other pattern according to attached position of body. For algorism design, we collected data occurring during walking about subject and we also defined occurring problem domain after analyzing the data. We settle defined problem domain and that we simulated the walking number measuring instrument with highly efficient in restricted environment.

• 대한치과교정학회지
• /
• 제22권3호
• /
• pp.531-556
• /
• 1992

The majority of the commonly used protraction headgears for the protraction of small and/or retropositioned maxilla not allow a change in the point of force application or direction of the force delivery to attain predictable results because of the position of the upper and lower lips to avoid discomfort to the patient. The purpose of this study was to investigate the initial reaction of maxillofacial complex according to the change of force variables such as direction and point of force application with designing an antenna type-modified protraction head gear. A macerated human skull with well aligned upper teeth was used to experimental model and the investigation was done by double exposure holographic interferometry. Fringe patterns of each protraction conditions were compared and analized. The results were as follows. (Frontal view) 1. The Counterclockwise rotation of the maxilla was showed by parallel protraction to occlusal plane and the fringe was decreased in number as higher point of force application. 2. Generally, the number of fringe was increased in 500gm of protraction force than in 300gm. 3. When apply the protraction force to the maxilla with rapid palatal expansion, the direction of fringe patterns was differed from the protraction without expansion. 4. In most of cases, the counterclockwise rotation was decreased in case of the direction of the force is $20^{\circ}$ downward to occlusal plane compared to the parallel direction. 5. At the point of force application is 15mm above and the direction of force is 20 downward to occlusal plane , the translation of the maxillary complex was showed. (Lateral view) 6. The direction of fringe patterns of the facial bones were differed each other by the sutures, and showed almost parallel when apply the 300gm and 500gm of protraction force. 7. In case of rapid palatal expansion with protraction of the maxilla, the fringe patterns between the maxillary area and the area from the posterior of the maxillary first molar to the pterygomaxillary fissure were differed. In case without rapid palatal expansion, the changes of direction and point of the force application did not affect to the direction and the number of the fringe patterns.

• 건축역사연구
• /
• 제18권3호
• /
• pp.27-44
• /
• 2009

In Korea, the direction of houses are typically determined by considering the directional orientation and shape of the mountain range rather than ignoring the geographical feature of the mountain range. Traditional villages of Korea are known to have very particular ways of adopting the geomantic surroundings of natural environment. This is very true especially have a high mountain in the back and a lower mountain in front. At the same time, most of the houses tend to prefer south as a man direction so that they can receive more sun light. However, if the mountain range faces north, it will not be easy to determine the directional orientation of houses. This paper, therefore, tries to identify how the houses of villages facing north, direst the orientation. This, the northern village, solves the problem by facing all direction rather than one major direction. The houses of the villages facing north, tend to revise the direction by changing the back mountain(주산) or front mountain(인산) that helps them change the direction towards he range of eastern or western direction. As a result, the houses tend to the direction towards east and wes compared to north and south. The directional orientation of houses was clearly distributed or concentrated by depending of the shape and directional orientation of the mountain range. This kind of research let us know the relationship between the natural north direction, the direction of geomantic surrounding, and the direction of houses in traditional Korean villages.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.284-287
• /
• 2004

After we experiment one direction fiber reinforced composites$(\theta\;=\;0^{\circ},\;J=1)$ to the X direction$(\theta\;=\;0^{\circ},\;J=1)$, we can say that fiber orientation efficiency and fiber orientation angle efficiency become lower. It is because the more the fabric is orientated in a equal direction with one direction fiber floor the more the load given from the exterior becomes shear rather than tension, even though one direction fiber floor gets the most of the exterior power. when fiber content ration is $10wt\%$, the fiber reinforcement efficiency of J=0.3 is similar with the fiber reinforcement efficiency of $\theta=30^{\circ}$ We also found that the fiber reinforcement efficiency of J=0.2 is similar with the fiber reinforcement efficiency of $\theta=20^{\circ}$ in case of $20wt\%$.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.111-121
• /
• 1997

The spectral energy balance model is composed and the nonlinear interaction is approximated by the discrete interaction parameterization as in WAM model. The numerical results of durational limited growth test agree very well with those of the exact model, EXACT-NL. The response of a wave spectrum to a change in wind direction is investigated numerically for a sequence of direction changes 30$^{\circ}$ , 45$^{\circ}$ , 60$^{\circ}$ , 90$^{\circ}$ . The high frequency components relax more repidly to the new wind direction than the low frequency components and the relaxation process also depends on the wave age. For wind direction changes less than 60$^{\circ}$ , the coupling by nonlinear interaction is so strong that the secondary peak in input source distribution is counteracted by the negative lobe of the nonlinear interaction. For wind direction changes grater than 60$^{\circ}$ , a second independent wind-sea spectrum is generated in the new wind direction, while the old spectrum gradually decays as swell.

• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.69-76
• /
• 2014

The shock buffet on a transonic transport aircraft are negative factors that reduce the aerodynamic performance of aircraft. The parametric studies were performed for position of nacelle/pylon to estimate the trend of flow mechanism under the wing that affects shock buffet. To generate external mesh of aircraft configuration that change the position of nacelle, snappyHexMesh provided in OpenFOAM was applied. Implicit density-based solver(ISAAC) was used for flow analysis. The change of nacelle position along horizontal direction dynamically affected the aerodynamic performance of transonic transport aircraft as comparing that of vertical direction. As a result of the parametric study of nacelle/pylon position, it was confirmed that the optimal position of nacelle can be obtained by aerodynamic design.

• 전자공학회논문지B
• /
• 제32B권11호
• /
• pp.1405-1416
• /
• 1995

An effective algorithm for implementation of unmanned surveillance system which detects moving object from image sequences, predicts the direction of it, and drives the camera in real time is proposed. Outputs of proposed algorithm are coordinates of location of moving object, and they are converted to the values according to camera model. As a pre- processing, extraction of moving object and shape discrimination are performed. Existence of the moving object or scene change is detected by computing the temporal derivatives of consecutive two or more images in a sequence, and this result of derivatives is combined with the edge map from one original gray level image to obtain the position of moving object. Shape discri-mination(Target identification) is performed by analysis of distribution of projection profiles in x and y directions. To reduce the prediction error due to the fact that the motion cha- racteristic of walking man may have an abrupt change of moving direction, an order adaptive lattice structured linear predictor is proposed.

• 한국컴퓨터정보학회논문지
• /
• 제20권7호
• /
• pp.121-127
• /
• 2015

This study is about establishing the policy direction according to the perception change of the welfare service of the aged. To achieve this goal, this study analyzed the reprocessed result of the survey related to the welfare of the aged among the second and third community social welfare plans of D county, Southern Jeolla Province. The result shows the recipients of the welfare service of the aged have higher perception about spreading the hardware side such as the welfare facility of the aged than about practicing the software policy such as elder care services. It suggests significant implication in deciding the priority of the welfare policy of the aged from now on. But this result is confined in D county, so getting the generalized conclusion needs the comprehensive review toward more broad regions hereafter.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.113-118
• /
• 1989

By using the single mode optical fiber, we fabricated Fiber-optic Fabry-Perot interferometer (FFPI). The change over a wide range in the optical path length of a FFPI is observed. The temporal movement of the interference fringes by external condition to P.Z. T) is converted to circular motion on an oscilloscope display and then recorded with a micro-computer. The two output voltages of the D/A converters are applied to X and Y terminals of oscilloscope to display circular motion on oscilloscope. Thus the direction of phase shift can be determined with observing the direction of circular motion. The variation of the optical length can be measured by calculating the angle of spot of circle with an accuracy of λ/90 wave length due to variation of temperature in this system 2.7x10-4$^{\circ}C$.

• The Journal of the Acoustical Society of Korea
• /
• 제18권4E호
• /
• pp.10-19
• /
• 1999

Psychophysical approaches to the room acoustics have been made in number of researches. The present study is looking at whether the listener's perception of frequency change in rooms are dependent on the acoustics of a listening environment. P(C)s for frequency change in short tones were measured in different listening conditions. Two experiments were carried out to investigate the influence of room acoustics on the listener's perception of frequency change, and its implication for evaluating the acoustics of listening environments were examined and discussed. It was found that the temporal and spectral contents of reflections from room surfaces might be an important factor which influenced the listener's perception of frequency change in a reverberant sound field. This implicates that psychophysical approach by measuring listener's frequency change perception might be an useful tool for evaluating room acoustics. However, cares should be taken, since some individual differences were found to exist with respect to the direction of frequency change.