• Title/Summary/Keyword: Change Control

Search Result 10,676, Processing Time 0.039 seconds

Design of Speed Controller of an Induction Motor Based on Fuzzy-Neural Network (퍼지-신경회로망에 근거한 유도전동기 속도 제어기 설계)

  • Choi, Sung-Dae;Ban, Gi-Jong;Nam, Moon-Hyon;Kim, Lark-Kyo
    • Proceedings of the KIEE Conference
    • /
    • 2006.10c
    • /
    • pp.282-284
    • /
    • 2006
  • Generally PI controller is used to control the speed of an induction motor. It has the good performance of speed control in case of adjusting the control parameters. But it occurred the problem to change the control parameters in the change of operation condition. In order to solve this problem, Fuzzy control or Artificial neural network is introduced in the speed control of an induction motor. However, Fuzzy control have the problems as the difficulties to change the membership function and fuzzy rule and the remaining error. Also Neural network has the problem as the difficulties to analyze the behavior of inner part. Therefore, the study on the combination of two controller is proceeded. In this paper, Speed controller of an induction motor based fuzzy-neural network is proposed and the speed control of an induction motor is performed using the proposed controller. Through the experiment, the fast response and good stability of the proposed speed controller is proved.

  • PDF

Impact of Germination and Initial Growth of Deciduous Six Oak Species under Climate Change Environment Condition (기후변화 환경에서의 낙엽성 참나무 6종의 발아와 초기 생장)

  • Jeong, Heon Mo;Kim, Hae Ran;You, Young Han
    • Korean Journal of Ecology and Environment
    • /
    • v.54 no.4
    • /
    • pp.334-345
    • /
    • 2021
  • The present study investigated the effect of global warming on germination and initial growth across six deciduous oak species (Quercus mongolica, Q. variabilis, Q. serrata, Q. dentata, Q. aliena, and Q. acutissima), which are the dominant tree species in Korea forest ecosystems. Seeds were sown in climate change treatments, with temperatures higher than those of the control (approximately 3.0℃ higher), and CO2 concentrations higher than those of the control (approximately 2-fold higher). Initial growth in each species was measured every two weeks. Initial growth was more rapid in all oak species at the time of root and shoot emergence under high temperature and CO2 treatments than in the control group. Leaf emergence in Q. mongolica, Q. variabilis, and Q. serrata occurred earlier under the climate change treatments than under the control. Root length increased significantly in Q. mongolica, Q. variabilis, and Q. dentata under the climate change treatments when compared to under the control. However, Q. aliena and Q. serrata exhibited a contrasting trends, and no significant difference was observed between the species and Q. acutissima. Shoot length increased significantly in Q. aliena under climate change treatments when compared to under the control but decreased in Q. aliena. In addition, no significant difference was observed in shoot length among Q. mongolica, Q. dentata, and Q. acutissima. The results showed that climate change treatments facilitated early growth, rapid emergence from the ground, leaf development, and enhanced belowground growth in Q. mongolica. Conversely, Q. aliena exhibited the lowest aboveground and belowground growth under climate change treatments when compared to other oak species. Climate change treatments had the least impact on Q. acutissima considering the insignificant differences observed in initial growth rates under climate change treatment.

A Research on Developing the Fault Tolerant Control System using Restructurable Control Method (구조 변경 제어 방식을 이용한 고장 허용 제어 시스템 설계에 관한 연구)

  • Hong, Ho-Taek;Kim, Yong-Min;Park, Jae-Hong
    • The Transactions of the Korean Institute of Electrical Engineers A
    • /
    • v.48 no.10
    • /
    • pp.1259-1263
    • /
    • 1999
  • In this paper, a method to guarantee system continuity is developed, which can be applied to discontinuity problem in the time domain of restructurable control system. This method can be summarized as input alternation using weight change considering convergence speed of system mode. Input is changed from 'system continuity guarantee input,' which is defined as a input that minimizes the change of state variables, to 'alternative controller input,' which is selected by Neil's PI/EAM[3]. AIDC aircraft model is used for simulation. By showing the waveform of system input and state variable, we can sure that this method is effective for depression of system shock like jerk.

  • PDF

Adaptive Repetitive Control for an Eccentricity Compensation of Optical Disk Driver (광 디스크 기기의 편심 보상을 위한 적응 반복 재어)

  • Kim, Jeong-Hun;Sim, Il-Ju;Park, Gwi-Tae;Roh, Hyung-Lae
    • Proceedings of the KIEE Conference
    • /
    • 2003.07d
    • /
    • pp.2146-2148
    • /
    • 2003
  • This paper present a modified repetitive control scheme for an optical storage system to track a periodic reference signal with dynamic change in period. Periodic disturbances can be adequately attenuated using the concept of repetitive control, provided the period is know. An optical storage system supports various speeds. To deal with time varying periodic disturbances, an proposed repetitive controller is turned based on repetitive control to change sampling frequency to follow the change of reference Period. A modified repetitive control scheme is proposed and implement on experimental set up of a optical disk driver.

  • PDF

Climate change and resilience of biocontrol agents for mycotoxin control

  • Magan, Naresh;Medina, Angel
    • 한국균학회소식:학술대회논문집
    • /
    • 2018.05a
    • /
    • pp.41-41
    • /
    • 2018
  • There has been an impetus in the development of biocontrol agents (BCAs) with the removal of a number of chemical compounds in the market, especially in the European Union. This has been a major driver in the development of Integrated Pest Management systems (IPM) for both pest and disease control. For control of mycotoxigenic fungi, there is interest in both control of colonization and more importantly toxin contamination of staple food commodities. Thus the relative inoculum potential of biocontrol agent vs the toxigenic specie sis important. The major bottlenecks in the production and development of formulations of biocontrol agents are the resilience of the strains, inoculum quality and formulation with effective field efficacy. It was recently been shown for mycotoxigenic fungi such as Aspergillus flavus, under extreme climate change conditions, growth is not affected although there may be a stimulation of aflatoxin production. Thus, the development of resilient biocontrol strains which can may have conserved control efficacy but have the necessary resilience becomes critical form a food security point of view. Indeed, under predicted climate change scenarios the diversity of pests and fungal diseases are expected to have profound impacts on food security. Thus, when examining the identification of potential biocontrol strains, production and formulation it is critical that the resilience to CC environmental factors are included and quantified. The problems in relation to the physiological competence and the relative humidity range over which efficacy can occur, especially pre-harvest may be increase under climate change conditions. We have examined the efficacy of atoxigenic strains of A. flavus and Clanostachys rosea and other candidates for control of A. flavus and aflatoxin contamination of maize, and for Fusarium verticillioides and fumonisin toxin control. We have also examined the potential use of fluidized-bed drying, nanoparticles/nanospheres and encapsulation approaches to enhance the potential for the production of resilient biocontrol formulations. The objective being the delivery of biocontrol efficacy under extreme interacting climatic conditions. The potential impact of climate change factors on the efficacy of biocontrol of fungal diseases and mycotoxins are discussed.

  • PDF

Research Integrated Change Process for Configuration Management of Construction Nuclear Power Plant (건설원전 형상관리를 위한 통합변경프로세스 연구)

  • Park, Youjin
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2016.05a
    • /
    • pp.231-232
    • /
    • 2016
  • Configuration Management (CM) is a process of identifying and documenting the characteristics of a Structures, Systems and Components (SSCs), and of ensuring that changes to these characteristics are properly assessed, approved, issued, implemented and verified. There are requirement management, change control, facility configuration information management for CM activities. In order to improve safety of Nuclear Power Plant(NPP), it is necessary to manage change item systematically. Existing CM concept is focused on the NPP in operation. On the other hand, NPP under construction is difficult to efficiently manage the change because of different change process from varoius stake-holders. This research considers method of consolidation change process for NPP to ensure that approved changes are accurately reflected in the design requirements, facility configuration information, and the physical configuration.

  • PDF

Digital Power Control of LLC Resonant Inverter for Microwave Oven (전자레인지용 LLC 공진형 인버터의 디지털 출력 제어)

  • Kang, Kyelyong;Kim, Heung-Geun;Cha, Honnyong
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.22 no.5
    • /
    • pp.457-462
    • /
    • 2017
  • This paper proposes a digital power control of the LLC resonant half-bridge inverter for high power microwave oven application. Conventional half-bridge inverter for driving a microwave oven uses a hardware-based power control method which varies the frequency according to the AC source voltage. In this case, it is difficult to control the output power according to the variation of the load status of magnetron. The proposed power control consists of an instantaneous current generator and a current controller. Instantaneous current generator makes an instantaneous current reference from power command using input voltage information. Current controller controls input current which has an information of status of magnetron. The proposed power control does not require any compensation algorithm for the change of the load status of the magnetron and change of input voltage. The validity of the proposed method for the control of the change of input voltage and frequency is verified by both simulation and experiment.

ANALYZING CAUSES OF CHANGE ORDERS IN KOREA ROAD PROJECTS

  • Kang-Wook Lee;Wooyong Jung;Seung Heon Han;Byeong-Heon Yoon
    • International conference on construction engineering and project management
    • /
    • 2009.05a
    • /
    • pp.1283-1287
    • /
    • 2009
  • The Korean government implemented 259 road projects from 2004 to 2007, valued at $18.4 billion. Change orders of these road projects occurred 8,973 times and, subsequently, caused significant increases in the cost of the projects, approximately up to $4.2 billion (22.8% of the initial budget). These significant problems of huge change orders require a more workable control system for budget management whereas the effectiveness of the government's control is still not satisfied. However, previous approaches and studies mostly limited their analyses to simply classifying the causes of the change orders. This paper investigates the real frequency and cost impacts incurred by each cause of a change order, primarily based on 218 road projects in Korea. The paper then identifies the attributes of change orders through a survey of 204 project participants in that those sources were inevitable or avoided if properly managed. The causes of the change orders are further analyzed with analysis of variance (ANOVA) in connection with contract volume, bid award rate, the contractor's capacity to perform, and the design company's capacity. This study found that if the contract volume is smaller, then the possibility of change orders is higher. Interestingly, if the bid award rate is less than 67.5%, it signifies the highest rate of change orders. In addition, the contractors whose construction ability is assessed as the top-ranked group showed the lowest change order rates. With these results, this paper provides the preventive guidelines for reducing the likelihood of change orders.

  • PDF

Effects of Guisinhwan on the Ovariectomized Rat Model of Postmenopausal Osteoporosis (귀신환이 난소적출 백서의 골다공증에 미치는 영향)

  • Kim Tae Hee;Kang Young Keum;Ahn Kyu Hwan;Kim Song Baeg;Cho Han Baek;Yoo Sim Keun
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.18 no.5
    • /
    • pp.1476-1484
    • /
    • 2004
  • Aging is characterized by an age-dependent reduction in bone density. Pronounced bone loss by postmenopausal estrogen deficiency induces a bad effect on dynamic balance of bone metabolism. When the bone density is reduced to the level below the fracture threshold, the risk for fracture is greatly increased. The purpose of this study is to examine what are the effects of the Guisinhwan(GSH : 歸腎丸) on the ovariectomized rat model of postmenopausal osteoporosis. The results of the experiment are as follows: Body weight in control group showed significant increase in comparison with sham, but that in GSH-treated showed no change in comparison with control. The level of serum albumin in control group showed significant decrease in comparison with sham. That in GSH-treated was slightly decreased in comparison with control. The level of serum ALP activity in control group showed significant increase in comparison with sham, but that in GSH-treated was significantly decreased in comparison with control. The level of serum phosphorous, calcium, GOT, GPT, T3 did not significant change among the three groups. The level of serum estrogen in control group showed slightly decreased in comparison with sham, but that in GSH-treated showed no change in comparison with control. The level of serum T4 in control group showed significant increase in comparison with sham, but that in GSH-treated was significantly decreased in comparison with control. Trabecular bone area as well as trabecular thickness in control group showed significant decrease In comparison with sham. Those in GSH-treated showed significant increase in comparison with control. Trabecular number did not significant change among the three groups. Trabecular separation only in GSH-treated showed significant decrease in comparison with control. Osteoclast number in control group showed significant increase in comparison with sham. That in GSH-treated showed significant decrease in comparison with control. Oseoblast surface in control group showed significant increase in comparison with sham, but that in GSH-treated showed no change in comparison with control. According to the above these results, GSH has shown to be capable of preventing and curing osteoporosis caused by old-aged and postmenopause.

Effects of Caraganae Sinicae Radix on the osteoporosis in ovariectomized rats (금작근(金雀根)이 난소적출로 유발된 흰쥐의 골다공증에 미치는 영향)

  • Kim, Hyoung-Jun;Lee, Dong-Nyoung;Seo, Il-Bok;Hwang, Jeong-Seon
    • The Journal of Korean Obstetrics and Gynecology
    • /
    • v.15 no.4
    • /
    • pp.17-31
    • /
    • 2002
  • Objective : This study was carried out to investigate the effects of the hormones and cytokines associated with bone metabolism in ovariectomized rats. Method : Twenty-four Female-Sprague-Dawley rats were divided into sham operated(normal) group, ovariectomized(control)group, ovariectomized and treated with extract Caraganae Sinicae Radix(treated) group. Each group was investigated the changes of body weight at 3,5,7weeks after treatment, and femur weight, femur/body weight, thickness of compact bone of body of femur, area of cancellous bone of distal epiphysis of femur, serum estrogen, serum calcitonin, serum parathormone, serum Tumor Necrosis $Factor-{\alpha}$, serum $lnterleukin-1{\beta}$ at 7weeks after treatment. The results were summerized as follows; 1. The treated group showed significant change in body weight compared with the control group at 5,7weeks after treatment. 2. The treated group revealed significant increases in femur/body weight compared with the control group. 3. The treated group showed a little thicker compact bone of body of femur than the control group. 4. The area of cancellous bone of distal epiphysis of femur in treated group was increased significantly compared with control group. 5. The level of serum estrogen showed no change compared with control group. 6. The level of serum calcitonin showed no change compared with control group. 7. The level of serum parathormone was decreased in treated group significantly compared with control group. 8. The level of serum $TNF-{\alpha}$ was decreased in treated group significantly compared with control group. 9. The level of serum $interleukin-1{\beta}$ showed no change compared with control group. The results indicate that Caraganae Sinicae Radix inhibits bones resorption in ovariectomized rats by it's lowering effects on serum parathormone and $TNF-{\alpha}$.

  • PDF