• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2115-2124
• /
• 2011

The rail surface defects which are generated on repeated rolling contact fatigue are getting increased according to high speed, high density, and minimum weight. In addition, Increasing noise and vibration are affected by these also impact load generated as well. Because of this phenomenon, more serious and critical damages were occurred. In fact, in order to control them, the rail grinding were conducted. However, there are not enough researches to make an criteria of generating optimal rail grinding amount in Korea. This study evaluated how depth of hardening on rail surface is formed and suggested optimal rail grinding amount by RCF(rolling contact fatigue) test with generated contact pressure between KTX wheel and UIC60 rail by applying FEM analysis. Therefore, the amount was generated approximately 0.2mm/20MGT to maintain integrity of rail surface by getting rid of depth of hardening on rail according to rail accumulated passing tonnage.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.1
• /
• pp.1-6
• /
• 1999

To find the latent effect of paper mill sludges (PMS) with and without alum, and alum paper mill sludge compost(PMSC) on aluminum toxicity of crops, the pH buffer capacity and the acidification resistance index (ARI) for PMSs and PMSC were investigated, comparing to upland soil. Buffer capacities of PMS with and without alum, and PMSC were significantly higher than $2.5cmol^+kg^{-1}$ of check soil as 137, 250, and $147cmol^+kg^{-1}$, respectively. Owing to such high buffer capacity of PMS and PMSC, they showed to be well-resisted to acidification.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.832_833
• /
• 2009

본 연구는 과거에 개발 되었었던 보조 선로 리액터를 구비한 초전도 한류기에 대한 것이다. 과거의 연구에서는 BSCCO선재와 YBCO coated condcutor (YBCO CC) 선재를 사용하여 실험적으로 한류특성에 대하서 연구 하였다 [1]. BSCCO 선재는 유도형으로 권선되어 정상 시에 저항은 작지만 인덕턴스 성분이 존재하는 보조 선로 리액터의 역할을 수행하였고 YBCO CC 선재는 무유도형으로 권선되어 스위치의 역할을 수행하였다. 두 개의 권선은 병렬로 연결되어 정상 시에는 전류가 YBCO CC 선재로 통전되다가 사고가 발생하면 YBCO CC 선재의 저항으로 인해서 BSCCO 선재로 통전되는 형태로 동작하였다. 본 연구에서는 BSCCO 선재의 보조 선로 리액터 부분을 초전도체가 아니라 일반 상전도체를 적용하여 스위치와 보조 선로 리액터의 조합에 변화를 주면서 한류 특성에 대한 시뮬레이션을 수행하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.744_745
• /
• 2009

고해상도의 NMR 연구 개발을 위해서는 고자장의 마그넷연구가 선행되어야 한다. 고자장을 구현하기 위해서는 저온초전도체를 이용한 마그넷뿐만이 아니라 고온초전도체를 이용한 인서트 코일의 연구가 필요하다. 연세대학교에서는 국가지정연구실사업으로 단백질 구조 규명의 초고자장 NMR 실현을 위한 고온초전도 인서트 코일 기술연구를 진행하고 있다. 본 논문에서는 고온초전도 인서트 코일 연구를 위해 제작할 LTS background magnet과 HTS 인서트 코일에 대한 전자장 해석을 진행하였다. 균일도나 선재 사양 등의 주요 변수 등을 고려하여 LTS background magnet과 HTS 인서트 코일에 적합한 사양을 결정하도록 하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1810_1811
• /
• 2009

자율주행 로봇은 자신위치와 장애물의 위치 등 주변 환경을 인지하여 원하는 지점까지 스스로 이동 및 임무 수행이 가능한 로봇 이다. 목표위치를 탐색하기 위하여 GPS 및 초음파 센서를 이용하여 이동 방향 설정 및 주변 장애물 위치를 파악할 수 있도록 하였다. 특히, WLAN을 이용하여 이동 로봇에 대한 위치 정보의 설정 및 위치 데이터의 교신이 가능하도록 하였고 이동로봇을 이용한 실제 실험을 통하여 원하는 위치 탐색과 장애물 회피가 효과적으로 수행됨을 확인한다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.822_823
• /
• 2009

Superconducting fault current limiters (SFCLs) provide one of the most effective solutions to cope with enormous increase of fault current level. The 13.2 kV/ 630 A class resistive SFCL using coated conductor (CC) was developed and its short-circuit test was successful. Successful commercialization of the SFCL requires that no loss is produced by impedance of limiting coil during normal operation. Since the limiting coil consists of inner layer and outer layer, gap length between the layers is an important parameter to analyze the electromagnetic characteristics of coil. This paper deals with the electromagnetic characteristics of coil according to gap length through the simulation and analysis in comparison with experiment results.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.783-785
• /
• 2001

This paper presents the analysis method to predict the current waveform and instantaneous and average torque of permanent magnet brushless motors(BLDC). In this paper, the method to improve the torque characteristics of BLDC, especially phase advanced angle, is also presented. The validity of this method is verified by comparing to measured results.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.704-715
• /
• 2008

The Aim of this development is the management of a forecasting analysis program based on a real-time remote sensing data. Using this program it is possible to predict a failure of levee facilities in advance. therefor, it is necessary for making plans of a safety countermove. In this development we have researched the analysis method which could operate effectively the levee facilities using real-time monitoring data from a remote sensing system and the safety managerial program using the algorism from the analysis method developed.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1616-1618
• /
• 2001

In recent the on-line partial discharge (PD) measurement using sensors, such as EMC, SSC, RTD and RFCT, as an indicator of stator winding insulation condition has been developed. RFCT sensor was placed arounding a grounding lead of surge capacitor to detecting PD. Trend of PD magnitude/phase angle/pulse number over time are useful parameter to diagnosis aging state. We have developed Radio Frequency Current Transformer(RFCT) sensor which is suitable for PD diagnostic measurement in 6.6kV rotating machines. In this paper, we describe the characteristics of RFCT sensor, such as frequency and PD magnitude using 6.6 kV model stator winding in Lab.

• Journal of the Korean Geophysical Society
• /
• v.8 no.3
• /
• pp.137-143
• /
• 2005

Early detection of premonitory symptom of slope movement ensures tremendous saving of lives and repair costs from catastrophic disaster. Therefore, it is essential to constantly monitor the performance and integrity of both reinforced and un-reinforced cut slopes. We developed a novel monitoring system by using tension wire sensors. It's advantages are highly sensitivity, simple installation, large displacement measurement, durability of system, capability of remote sensing. Real-time measurement of slope surface movement is shown graphically and it gives a warning when the monitored value exceeds a given threshold level so that any sign of abnormal slope movement can be easily perceived.