• 한국의학물리학회지:의학물리
• /
• 제19권1호
• /
• pp.49-55
• /
• 2008

본 연구는 MDCT에서 선량을 측정하는데 사용되는 ionization chamber의 calibration 전과 후의 calibration factor에 따른 선량과 촬영실의 온도, 기압의 보정(correction factor) 적용 유무에 따른 $CTDI_w$를 비교 분석하는데 있다. 2007년 3월 21일에 교정된 Model 2026C electormeter (RADICAL 2026C, USA)를 이용한 MDCT (GE light speed plus 4 slice, USA)와 head and body CT dosimetry phantom을 사용하여 측정된 값을 비교 분석하였다. 결과는 calibration factor와 주변 온도, 압력의 correction factor를 보정 해 준 $CTDI_w$ 값이 보정을 하지 않고 계산된 값보다 $0.479{\sim}3.162mGy$의 범위만큼 더 많은 선량 값이 계산되었고 실제 병원에서 사용하는 복부 일반 CT (abdomen routine CT) 조건에서의 환자선량을 측정한 결과 factor적용 전과 후의 유효선량 차는 최고 0.7 mSv의 차이가 남을 확인 할 수 있었다. 이러한 결과는 ionization chamber의 calibration과 촬영실 주변 온도와 압력이 환자선량의 측정과 계산에 중요한 요소임을 알 수 있다. 따라서 정확한 환자 선량 측정을 위해서는 촬영실 주변 온도와 압력뿐만 아니라 습도 및 recombination factor, x-ray beam quality 특성, 촬영조건(exposure conditions), 측정부위(scan region) 등에 대한 보정 factor들의 정확한 정보를 알아야 한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.377-377
• /
• 2016

Under nanosecond-pulsed laser irradiation, light-absorbing thin films have been used for photoacoustic transmitters for ultrasound generation. Especially, nanostructured absorbers are attractive due to high optical absorption and efficient thermoacoustic energy conversion: for example, 2-dimensional (2-D) gold nanostructure array, synthetic gold nanoparticles, carbon nanotubes (CNTs), and reduced graphene oxides. Among them, CNT has been used to fabricate a composite film with polydimethylsiloxane (PDMS) that exhibits excellent photoacoustic conversion performance for high-frequency, high-amplitude ultrasound generation. Previously, CNT-PDMS nanocomposite films were made by using a high-temperature chemical vapor deposition (HTCVD) process for CNT growth. However, this approach is not suitable to fabricate large-area CNT films (>several cm2). This is because a chamber dimension of HTCVD is limited and also the process often causes nonuniform CNT growth when the film area increases. As an alternative approach, a solution-based process can be used to overcome these issues. We develop PDMS composite transmitters, based on the solution process, using several nanostructured light-absorbers such as CNTs, nanoink powders, and imprinted regular arrays of gold nanostructure. We compare fabrication processes of each composite transmitters and photoacoustic output performance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.332-333
• /
• 2009

In this paper, we have deposited silicon nitride films by plasma-enhanced chemical vapor deposition (PECVD). For films deposited under optimized conditions, the mechanism of plasma-enhanced vapor deposition of silicon nitride is studied by varying process parameters such as rf power, gas ratio, and chamber pressure. It was demonstrated that organic light-emitting diode(OLEDs) were fabricated with the inorganic passivation layer processing. We have been studied the inorganic film encapsulation effect for organic light-emitting diodes (OLED). To evaluate the passivation layer, we have carried out the fabrication of OLEDs and investigate with luminescence and MOCON.

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.269-273
• /
• 2013

본 논문은 대표적인 전파응용기기로 알려진 PDP(Plasma Display Panel) TV와 RF(Radio Frequency) 전구가 30MHz 이하 무선 서비스에 대한 전자기기의 잠재적 간섭 영향을 분석한 것이다. PDP TV와 RF 전구의 방사 크기를 전자파무반사실에서 측정하였고 이를 바탕으로 다수의 간섭 신호가 존재하는 경우에 결합된 간섭신호의 크기를 계산하였다. 분석 결과, 간섭원의 수에 따라 결합된 간섭 신호의 크기가 증가되는 경향을 확인하였다. 실험을 통해 얻어진 전자기기의 방사 측정값과 CISPR(International Special Committee on Radio Interference) 11의 제한치를 비교함으로 30MHz 이하의 무선 서비스에 대한 전자기기 간섭 잠재성을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.425.2-425.2
• /
• 2014

$TiO_2$ possesses great photocatalytic properties but absorbs only UV light owing to high band gap energy (Eg = 3.2 eV). By narrowing the band gap through doping a metal ion, the photocatalytic activity can be enhanced in condition of the light of a higher than 365 nm wavelength. Main purpose for this study is to evaluate the activities of metal doped $TiO_2$ for degrading the volatile organic compounds (VOCs); p-xylene is chosen in the VOC removal test. Vanadium is selected in this study because an ionic radius of vanadium is almost the same as titanium ion and vanadium can be easily doped into $TiO_2$. V-doped $TiO_2$ was synthesized by sol-gel methods and compared with pure $TiO_2$. Pure TiO2 powder and V-doped $TiO_2$ powder were coated on glasses by spray coating method. UV-Visible spectrophotometer was used for the measurement of the band gap changes. VOC concentration degradation level was tested with using various UV light sources in an enclosed chamber. Catalytic activities of prepared samples were evaluated based on the experimental results and compared with coated pure $TiO_2$ sample.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.188-191
• /
• 2013

본 논문은 수직형 정수처리시설 내의 에너지 절감을 위해 외부의 자연광과 인체감지를 통한 실내 조도 제어용 LED 조명 제어보드를 구성하여 무선 환경에서의 실시간 모니터링을 통해 조명 제어가 가능하도록 구성하였다. 또한, Zigbee 통신을 LED 조명에 적용함으로서 무선 데이터 전송과 능동적 LED 조명 밝기제어가 가능하도록 구성하였다. 제안한 제어방식은 외부의 자연광에 따라 조명의 밝기를 단계별로 디밍 제어하여 조절 및 제어함으로써 실내에너지를 실시간으로 제어하여 에너지 절약 효과를 극대화할 수 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권3호
• /
• pp.410-415
• /
• 2009

The weekly liveweight gain, growing and stress parameters of quails bred using two different types of lighting for 6 weeks following hatching were examined in this study. The first type of lighting was 23 L:1 D, continuous lighting (CL), widely used in the commercial system and the second was a self-photoperiod (SP) system consisting of a continuously lit chamber and a dark chamber the quails could move to as they wished. On the first 15 days, no difference was found in liveweight gain between the two breeding systems. On the $6^{th}$ week when the trial was completed, the liveweight of the male quails upon which CL lighting was used was 159.03 g while the weight of males in the SP group was 174.43 g; these values in female quails of the CL group were 179.15 g and in the SP group were 200.68 g. The CL group had lower testis volume (TVOM, $cm^{3}$) and testis weight (TW, g) than the SP group, however there was no difference between the groups in testis weight/body weight rate (BWTW %). In female quails, the ovary weight (OW, g) and the ovary weight/body weight rate (BWOW, %) values were higher in the SP group. The CL light regime was concluded to cause stress in male quails (CL, Heterophil/Lymphocyte ratio (H/L): 0.27; SP, H/L: 0.17). In conclusion; the SP system allowing the quails to regulate their light periods increased liveweight gain and enabled sexual maturity to be gained at an earlier period than in quail on the CL system and improved their welfare.

• 한국전기전자재료학회논문지
• /
• 제25권9호
• /
• pp.738-742
• /
• 2012

This paper conducted a study on how the heat radiation of light emitting diode(LED) luminaires affects the indoor temperature increase. The effect was compared with that of a 20 W compact fluorescent lamp(CFL) and a 50 W MR16 halogen lamp which are most widely used inside of cruises, a LED downlight and a 4W MR16 LED replacing each of them. We installed a luminarie inside a thermally shielded chamber, measuring the temperature changes under the same volume every 5 minutes and compared the result with theoretically calculated heat radiation. The temperature changes in the chamber was measured four times, on seven hours' period in order to keep sufficient time once the temperature reaches the thermal equilibrium state. The results showed that the temperature of the 20 W E26 CFL and the 10 W LED downlight increased by $21.1^{\circ}C$ and $10.4^{\circ}C$ respectively, while that of the 50 W halogen MR16 and the 4 W LED MR16 increased by $33.9^{\circ}C$ and $4.8^{\circ}C$ respectively. The experimental heat radiation were calculated from the results and the experimental heat radiation of the CFL and the LED downlight were 171.5 cal and 86.5 cal, and those of the halogen MR16 and the LED MR16 were 275.3 cal and 36.5 cal. Therefore, the heat radiation was reduced by 49.5% and 86.7%, respectively, by replacing conventional light source with LED. In conclusion, we can expect a reduction of power consumption in air condition system and the effect on indoor temperature increase by application of LED luminaires.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.351-358
• /
• 2006

The capability of high pressure injection with small fuel quantify at all engine operating conditions is one of the main feature in common rail fuel injection system, which is used in small and light-duty Diesel engine. The key parameter for the better atomized fuel sprays and multiple injections of this common rail fuel injection control, that can be freely selected irrespective of the engine speed and load is the mechanism controlling the needle energizing and movement in high pressure Diesel injector. In the electro-hydraulic injector, the injection nozzle is being opened and closed by movement of the injector's needle which is balanced by pressure between the nozzle seat and the needle control chamber. This study describes the macroscopic spray structure characteristics of the common rail Diesel injectors with different electric driving method i.e. the solenoid-driven and piezo-driven type. The macroscopic spray characteristics such as spray tip speed. spray tip penetration and spray cone angle were investigated by the high speed spray, which is measured by the back diffusion light illumination method with optical system for the high speed temporal photography in a constant volume chamber pressurized by nitrogen gas. As the results, the prototype piezo-driven injector system was designed and fabricated for the first time in domestic case and the effect of injector's needle response driven by different drive type was compared between the solenoid and piezo-driven injector It was found therefore. that the piezo-driven injector showed faster needle response and had better needle control capability by altering the electric input value than the solenoid-driven injector.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.208-208
• /
• 2010

Zinc oxide (ZnO) is a functional material with interesting optical and electrical properties, a wide band gap (more than 3.3 eV), a high transmittance in the visible light region, piezoelectric properties, and a high n-type conductivity. This material has been investigated for use in many applications, such as transparent electrodes, blue light-emitting diodes, and ultra-violet detector. ZnO films grown under low oxygen pressure by thin film deposition methods show low resistivity and large free electron concentration. Therefore, reducing the background carrier concentration in ZnO films is one of the major challenges ahead of realizing high-performance ZnO-based optoelectronic devices. In this study, we deposited ZnO thin films on sapphire substrates by pulsed laser deposition (PLD) with employing an oxygen plasma source to decrease the background free-electron concentration and enhance the crystalline quality. Then, the substrate temperature was varied between 200 'C to 900 'C The vacuum chamber was initially evacuated to a pressure of $10^{-6}$ Torr, and then a pure $O_2$ gas was introduced into the chamber and the pressure during deposition was maintained at $10^{-2}$ Torr. Crystallinity and orientation of ZnO films were investigated by X-ray diffraction (XRD). The film surface was analyzed with atomic force microscope (AFM). And electrical properties were measured at room temperature by Hall measurement.